1. 서론
Thank you for choosing the FLITI AMS193 Motion Sensor Solar Security Lights. This product is designed to provide efficient and reliable outdoor lighting using solar power, featuring adjustable heads, a sensitive motion sensor, and a durable waterproof design. Please read this manual carefully before installation and use to ensure optimal performance and safety.
2. 안전 정보
- Ensure the product is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure proper charging.
- 제품을 분해하거나 개조하지 마십시오. 허가되지 않은 개조는 제품 손상을 초래하고 보증을 무효화할 수 있습니다.
- 제품을 화기 또는 고온에 가까이 두지 마십시오.
- Avoid direct eye exposure to the bright LED light.
- 배터리와 전자 부품은 현지 규정에 따라 폐기하십시오.
- This product is IP65 waterproof, suitable for outdoor use in various weather conditions, but avoid submerging it in water.
3. 패키지 내용
모든 품목이 들어 있는지 확인하려면 패키지를 확인하세요.
- FLITI AMS193 Solar Security Light Unit (x2)
- 마운팅 브래킷(x2)
- Screws and Wall Plugs (x4 sets)
- 사용 설명서(x1)
4. 제품 특징
- 슈퍼 밝은 조명: Equipped with 229 high-quality LED beads, providing up to 2500 lumens of 6500K bright white light.
- Wider Lighting Area: Features 3 independently adjustable lamp heads and a rotatable solar panel, allowing for omnidirectional and multi-angle lighting coverage up to 120 degrees.
- Ultra-Sensitive Motion Sensor: An upgraded infrared digital motion sensor detects movement up to 12 meters (39 feet) within a 120-degree angle, activating the light quickly at night.
- IP65 방수: Durable construction ensures reliable operation in various outdoor weather conditions, including rain and snow.
- Solar Powered & Wireless: Environmentally friendly and easy to install without the need for electrical wiring.
Image: Key features of the FLITI AMS193 solar light, including sensing distance, operating modes, and waterproof rating.
Image: High-quality LED beads and brightness comparison.
Image: IP65 Waterproof feature in action during rain.
5. 설정 및 설치
The FLITI AMS193 solar security light is designed for quick and simple wireless installation.
5.1 설치 위치 선택
- Select a location that receives direct sunlight for at least 6-8 hours per day to ensure the solar panel can fully charge the battery.
- Avoid areas under eaves, trees, or other obstructions that might block sunlight or motion sensor detection.
- Mount the light at a height of approximately 2-3 meters (6.5-10 feet) for optimal motion detection and light coverage.
5.2 장착 단계
- Mark the desired installation position on the wall.
- 표시된 위치에 두 개의 구멍을 뚫습니다.
- 뚫린 구멍에 벽면 플러그를 삽입합니다.
- 제공된 나사를 사용하여 장착 브래킷을 벽에 고정합니다.
- Slide the solar light unit onto the mounting bracket until it clicks securely into place.
Image: Installation steps for mounting the solar light.
5.3 Adjusting Light Heads and Solar Panel
The solar panel and the three lamp heads can be rotated independently to customize lighting direction and solar charging angle.
- Adjust the solar panel to face direct sunlight for maximum charging efficiency.
- Angle the three lamp heads to cover your desired lighting areas, such as pathways, doorways, or garden sections.
Image: Flexible rotation design of the solar panel and light heads.
6. 사용 설명서
The FLITI AMS193 features three distinct operating modes, selectable via a button on the back of the unit.
6.1 초기 충전
Before first use, allow the solar light to charge in direct sunlight for at least 8-10 hours to ensure the battery is fully charged.
Image: Solar light charging during the day and activating at night.
6.2 모드 선택
Press the power button on the back of the unit to cycle through the following modes:
- 모드 1(모션 센서 모드): The light remains off until motion is detected. When motion is sensed, the light turns on at full 2500LM brightness for approximately 20 seconds, then turns off after motion ceases.
- Mode 2 (Dim to Sensor Mode): The light automatically turns on at dusk at a low brightness (approx. 200LM). When motion is detected, it switches to full 2500LM brightness for approximately 20 seconds, then returns to dim brightness after motion ceases. After 6 hours of operation, it automatically switches to Mode 1.
- Mode 3 (Always On Mode): The light automatically turns on at dusk at a medium brightness (approx. 500LM) and stays on continuously. After 4 hours of operation, it automatically switches to Mode 1.
Image: Visual representation of the three operating modes.
7. 유지관리
정기적인 유지 관리는 태양광 조명의 수명과 최적의 성능을 보장합니다.
- 깨끗한 태양광 패널: 부드러운 천으로 태양광 패널을 주기적으로 닦아주세요.amp 천으로 먼지, 이물질, 이물질을 제거하세요. 깨끗한 패널은 햇빛 흡수율을 극대화하고 충전 효율을 높여줍니다.
- 배터리 교체: The unit uses rechargeable batteries. If the light's performance significantly decreases over time, the batteries may need replacement. Access the battery compartment by removing the plate cover. Ensure to replace with compatible rechargeable batteries.
- 손상 여부 검사: Regularly check the light for any physical damage, loose connections, or signs of wear.
8. 문제 해결
If you encounter issues with your FLITI AMS193 solar lights, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 밤에는 불이 켜지지 않습니다. | 충전하기에는 햇빛이 부족합니다. Switch is off or in incorrect mode. 배터리가 방전되었거나 고장났습니다. | 태양광 패널이 매일 6~8시간 직사광선을 받을 수 있도록 하십시오. Check the operating mode and ensure it's set correctly (Mode 1, 2, or 3). Allow several days of charging. If issue persists, consider replacing the rechargeable battery. |
| 빛이 어둡거나 짧은 시간 동안만 켜져 있습니다. | 충전이 충분하지 않습니다. 더러운 태양광 패널. 배터리가 노후화되었습니다. | 조명을 햇빛이 더 잘 드는 곳으로 옮기세요. 태양광 패널을 정기적으로 청소하세요. Replace the rechargeable battery if it's old. |
| 동작 감지 센서가 작동하지 않거나 너무 민감합니다. | 센서가 막혔습니다. Incorrect mounting height/angle. Environmental factors (e.g., strong winds, heat sources). | 센서 렌즈가 깨끗하고 막힘이 없는지 확인하십시오. Adjust the mounting height and angle for optimal detection. Consider relocating if false triggers are frequent due to environmental factors. |
이러한 해결 방법으로 문제가 해결되지 않으면 고객 지원팀에 문의하십시오.
9. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | AMS193 |
| 상표 | 플리티 |
| 광원 | 229 LED 비즈 |
| 명도 | 최대 2500 루멘스 |
| 색온도 | 6500 켈빈(쿨화이트) |
| 모션 센서 범위 | 최대 12미터(39피트) |
| 모션 센서 각도 | 120도 |
| 방수성 | IP65 방수 |
| 전원 | 태양열 전원 |
| 재료 | 플라스틱 |
| 장착 유형 | 벽걸이형 |
| 조명 헤드 수 | 3 (조정 가능) |
10. 보증 및 지원
제조업체 보증: This product comes with a 2-year manufacturer warranty from the date of purchase, covering defects in materials and workmanship under normal use.
보장되는 내용: 재료 및 제작 기술의 결함.
보장되지 않는 사항: Damage caused by improper installation, misuse, abuse, accidents, unauthorized repairs or modifications, or normal wear and tear.
고객 지원: For warranty claims, technical assistance, or any questions regarding your FLITI AMS193 solar lights, please contact your retailer or the manufacturer's customer service through the contact information provided at the point of purchase.