Fenge 2-Tier Wooden Monitor Stand Desk Shelf

1. 서론

Thank you for choosing the Fenge 2-Tier Wooden Monitor Stand Desk Shelf. This product is designed to enhance your workspace organization and improve ergonomic posture. Please read this manual carefully before assembly and use to ensure proper installation and safe operation.

Image 1.1: The Fenge 2-Tier Wooden Monitor Stand supporting dual monitors and organizing desk items.

This monitor stand features a 2-tier design with a segmented upper shelf, allowing for categorized storage of various items. The lower tier provides space for peripherals such as keyboards and mice, helping to declutter your desk and expand your usable workspace. It is constructed from durable MDF wood with robust 20mm iron legs, ensuring stability even when supporting dual monitors. The stand elevates your monitor by approximately 13.7 cm, promoting a more natural neck and back posture to reduce strain.

2. 패키지 내용

조립을 시작하기 전에 모든 구성품이 포함되어 있고 손상되지 않았는지 확인하세요. 부품이 누락되었거나 손상된 경우 고객 지원 센터에 문의하세요.

• Top Shelf Panel (MDF)
• Bottom Shelf Panel (MDF)
• Side Support Legs (Iron, 20mm thickness)
• Connecting Hardware (Screws, dowels, etc.)
• Assembly Tool (Hex key, if required)
• 사용 설명서

3. 설치 및 조립

Assembly of the Fenge Monitor Stand is straightforward. Follow these steps carefully:

1. 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼낸 후 긁힘을 방지하기 위해 깨끗하고 부드러운 표면에 놓으세요.
2. 부품 식별: Refer to the parts list to identify each component.
3. 측면 지지대를 부착하세요: Secure the iron side support legs to the bottom shelf panel using the provided screws. Ensure they are aligned correctly.
4. 상단 선반 설치: Place the top shelf panel onto the side supports, aligning the pre-drilled holes. Secure it with the remaining screws.
5. 모든 연결부를 조이세요: 모든 부품이 제자리에 놓이면 안정성을 확보하기 위해 모든 나사를 살살 조여주세요. 너무 세게 조이지 마세요.

Image 3.1: Detail of the iron leg and MDF board construction, illustrating the assembly points.

After assembly, place the stand on a flat, stable surface. Ensure it does not wobble before placing any devices on it.

4. 사용 설명서

The Fenge Monitor Stand is designed for versatile use to organize and elevate your devices.

• 모니터 배치: Place your monitor(s) on the top shelf. The stand is suitable for single or dual monitor setups.
• Peripheral Storage: Utilize the lower tier to store your keyboard, mouse, and other small peripherals when not in use, freeing up desk space.
• 액세서리 정리: The segmented upper shelf allows for organized storage of pens, notebooks, external hard drives, or other desk accessories.
• Ergonomic Benefit: The stand elevates your monitor to a height that helps align your eye level, reducing strain on your neck and shoulders during prolonged use.

이미지 4.1: Examples of the stand's versatile applications, including dual monitor, printer, and TV stand setups.

5. 유지관리

To ensure the longevity and appearance of your Fenge Monitor Stand, follow these maintenance guidelines:

• 청소: 부드러운 d로 표면을 닦으십시오.amp 천으로 닦으세요. 강한 화학 물질이나 연마성 세제는 마감재를 손상시킬 수 있으므로 사용하지 마세요.
• 유출: The MDF material is resistant to water and dirt. In case of spills, wipe immediately with a dry cloth to prevent moisture absorption.
• 안정성 확인: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
• 하중 용량: Do not exceed the maximum load capacity of 45 kg (99 lbs) to prevent damage or instability.

Image 5.1: Illustrates the durable MDF board and 20mm iron frame construction, highlighting the product's robust design.

6. 문제 해결

If you encounter any issues with your monitor stand, refer to the following common troubleshooting tips:

• 흔들리는 스탠드: Ensure all screws are securely tightened. Check that the stand is placed on a flat, even surface.
• 조립 난이도: Review 조립 설명서를 주의 깊게 읽으십시오. 나사를 조이기 전에 모든 부품의 방향이 올바른지 확인하십시오. 부품을 억지로 끼워 넣지 마십시오.
• 손상된 부품: 배송 중 부품이 손상되었거나 조립 과정에서 손상된 경우, 조립을 진행하지 마십시오. 교체 부품은 고객 지원 센터로 문의하십시오.

7. 사양

Image 7.1: Detailed dimensions of the Fenge 2-Tier Monitor Stand.

8. 보증 및 지원

Fenge products are manufactured with quality and durability in mind. For specific warranty information or if you require assistance with your product, please refer to the warranty card included in your package or contact Fenge customer support directly through the retailer's platform where the product was purchased. Please have your model number (G04F210) and purchase details ready when contacting support.