ECOELER YM2112

ECOELER Motion Sensor Light Switch

Model: YM2112 - Instruction Manual

1. 서론

The ECOELER Motion Sensor Light Switch (Model YM2112) provides automated lighting control using Passive Infrared (PIR) motion detection. This device is designed for single-pole applications and requires a neutral wire for installation. It offers adjustable settings for sensitivity, ambient light detection, and time delay, allowing customization for various indoor environments such as bathrooms, laundry rooms, closets, and garages.

ECOELER Motion Sensor Light Switch with faceplate.

Figure 1: ECOELER Motion Sensor Light Switch with faceplate.

2. 안전 정보

  • 경고: 화재, 감전 또는 사망을 방지하려면 회로 차단기나 퓨즈 박스에서 전원을 끄고 배선을 하기 전에 전원이 꺼져 있는지 테스트하세요.
  • Installation must be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.
  • This device is for single-pole applications only. Do not use in 3-way or multi-way circuits.
  • A neutral wire is required for operation. Ensure your electrical box has a neutral wire (typically white) before installation.
  • 최대 와트를 초과하지 마십시오tage ratings: 150W for LED/CFL, 300W for Incandescent/Halogen.
  • 구리선만 사용하세요.

3. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

  • Motion Sensor Light Switch (YM2112)
  • 월 플레이트
  • 설치 지침
  • 장착 나사(4개)
ECOELER Motion Sensor Light Switch, wall plate, and screws.

Figure 2: Included components: Motion Sensor Light Switch, wall plate, and mounting screws.

4. 특징

  • 핸즈프리 제어: Automatically activates lighting upon motion detection.
  • 모드 선택: Choose between Occupancy (OCC) and Vacancy (VAC) modes.
  • 조정 가능한 설정: Customizable time delay (15s to 30min), sensitivity (20% to 100%), and ambient light sensing (dark to day).
  • 폭넓은 호환성: Supports LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
  • Single Pole Control: Designed for single-pole circuits only.
  • 넓은 감지 범위: 180° detection angle with a maximum range of 26 feet (8 meters).
  • 내구성 있는 구조: Features a tough thermoplastic housing for impact and scratch resistance.

5. 설치

5.1 설치 전 체크리스트

  1. 작업을 시작하기 전에 회로 차단기에서 전원이 꺼져 있는지 확인하십시오.
  2. Confirm the presence of a neutral wire (typically white) in your electrical box. This switch requires a neutral wire.
  3. Verify that the circuit is a single-pole setup. This switch is not compatible with 3-way or multi-way circuits.

5.2 배선 지침

배선도를 주의 깊게 따르십시오. 단계 중 이해가 안 되는 부분이 있으면 자격을 갖춘 전기 기술자에게 문의하십시오.

  1. 회로 차단기에서 전원을 끄세요.
  2. 기존 벽면판과 스위치를 제거합니다.
  3. Identify the wires: Hot (Black), Load (Red, or another color connected to the light), Neutral (White), and Ground (Green or bare copper).
  4. Connect the wires from the wall box to the corresponding terminals on the ECOELER Motion Sensor Light Switch as shown in the wiring diagram below.
  5. 제공된 나사를 사용하여 스위치를 벽면 박스에 고정하십시오.
  6. 새 벽면 플레이트를 부착하세요.
  7. 회로 차단기에서 전원을 복구하세요.
  8. Allow a 30-second warm-up period after power is restored for the sensor to calibrate.
Wiring diagram for the ECOELER Motion Sensor Light Switch, showing connections for neutral, hot, load, and ground wires.

Figure 3: Wiring Diagram for Model YM2112.

Wiring Connections for YM2112 Series Switch
Circuit Box WireScrew on YM2112 Switch
Power wire (hot)검은색
Load to power light or fan금
Green or non-insulated (copper) ground wire녹색
Neutral (required)은

메모: There is a 30-second warm-up period after each power reset. During this time, the sensor may not respond immediately.

6. 운영

The ECOELER Motion Sensor Light Switch offers three primary operation modes: Occupancy (OCC), Vacancy (VAC), and OFF. These modes are selected using the internal switches located behind the faceplate.

Diagram illustrating Occupancy, Vacancy, and OFF modes for the ECOELER Motion Sensor Light Switch.

Figure 4: Operation Modes Diagram.

6.1 Occupancy (OCC) Mode

  • 기능: Automatic ON and Automatic OFF.
  • 행동: The light automatically turns ON when motion is detected and automatically turns OFF after a set time delay when no motion is detected.
  • 이상적인 대상: High-traffic areas where hands-free operation is desired, such as bathrooms, laundry rooms, and closets.

6.2 Vacancy (VAC) Mode

  • 기능: Manual ON and Automatic OFF.
  • 행동: The light must be manually turned ON by pressing the ON/OFF button. It will then automatically turn OFF after a set time delay when no motion is detected.
  • 이상적인 대상: Areas where you prefer to control when the light turns on, but still want the energy-saving benefit of automatic shut-off, such as offices or living rooms.

6.3 끄기 모드

  • 기능: Manual ON and Manual OFF.
  • 행동: The light is controlled entirely manually by pressing the ON/OFF button. Motion detection is disabled for light activation, but the sensor may still detect motion (indicated by an LED flash) without triggering the light.
  • 이상적인 대상: Situations where automatic control is not desired, or for testing purposes.

7. 사용자 정의 가능한 설정

The ECOELER Motion Sensor Light Switch features adjustable settings for optimal performance. These settings are accessed by carefully removing the faceplate to reveal the adjustment dials and switches.

ECOELER Motion Sensor Light Switch with cover removed, showing sensitivity, light level, and time delay adjustments.

그림 5: 내부 view of adjustable settings.

클로즈업 view of the adjustable settings on the ECOELER Motion Sensor Light Switch, including sensitivity, light level, and time delay.

그림 6: 상세 view of customizable settings.

7.1 Adjustable Sensitivity (SENSE)

  • 범위: Low (20%) to High (100%).
  • 기능: Controls how easily the sensor detects motion.
  • 조정: Turn the 'SENSE' dial to increase or decrease the detection range and responsiveness. Higher sensitivity detects smaller movements or movements further away.

7.2 Adjustable Light Level (LIGHT)

  • 설정: Day, Dim, Dark.
  • 기능: Determines the ambient light level at which the sensor will activate the lights.
  • 조정: Select 'Day' for activation regardless of ambient light, 'Dim' for activation in low light conditions (evening), and 'Dark' for activation only in very low light (night).

7.3 Adjustable Time Delay (TIME)

  • 범위: 15 seconds, 1 minute, 5 minutes, 15 minutes, 30 minutes.
  • 기능: Sets how long the light remains ON after the last detected motion.
  • 조정: Select the desired time delay using the 'TIME' dial.

8. 감지 범위

The ECOELER Motion Sensor Light Switch utilizes Passive Infrared (PIR) technology to detect human body heat movement. It offers a wide detection area for effective coverage in various room layouts.

  • 감지 각도: 180도.
  • 최대 범위: Up to 26 feet (approximately 8 meters) from the front, and up to 15 feet (approximately 4.5 meters) on the sides.
  • 놓기: For optimal performance, install the switch in a location where its field of view is not obstructed by furniture, doors, or other objects.
Diagram showing the 180-degree motion detection range of the ECOELER Motion Sensor Light Switch.

Figure 7: Motion Detection Coverage Area.

9. 유지관리

The ECOELER Motion Sensor Light Switch requires minimal maintenance. Follow these guidelines to ensure proper function and longevity:

  • 청소: Gently wipe the surface of the switch and sensor lens with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the device.
  • 장애물: Ensure the sensor lens is free from dust, dirt, or any obstructions that could interfere with motion detection.
  • 정기 점검: Periodically test the switch's functionality to ensure it is operating correctly in your chosen mode and settings.
  • Power Off for Service: Always turn off power at the circuit breaker before performing any maintenance that involves removing the wall plate or accessing internal components.

10. 문제 해결

If you experience issues with your ECOELER Motion Sensor Light Switch, refer to the following common problems and solutions:

문제 해결 가이드
문제가능한 원인해결책
Light does not turn ON with motion.1. 전원이 꺼져 있습니다.
2. 잘못된 배선.
3. Sensor lens obstructed.
4. 감도가 너무 낮게 설정되었습니다.
5. Light level setting too high (e.g., 'Dark' in a bright room).
6. Switch is in VAC or OFF mode and not manually activated.		1. 회로 차단기를 확인하세요.
2. Verify wiring connections (refer to Section 5.2). Ensure neutral wire is connected.
3. Clear any obstructions from the sensor lens.
4. Increase sensitivity setting (refer to Section 7.1).
5. Adjust light level setting (refer to Section 7.2).
6. Switch to OCC mode or manually activate in VAC mode.
Light turns ON too frequently or unexpectedly.1. 감도가 너무 높게 설정되었습니다.
2. Sensor detecting motion outside desired area (e.g., pets, drafts).
3. Switch is in OCC mode in a high-traffic area.		1. Decrease sensitivity setting (refer to Section 7.1).
2. Reposition the switch or adjust sensitivity to narrow detection.
3. Consider switching to VAC mode if manual activation is preferred.
Light turns OFF too quickly or stays ON too long.시간 지연 설정이 잘못되었습니다.Adjust the time delay setting to your preference (refer to Section 7.3).
Light flickers or does not work with certain bulbs.Incompatibility with bulb type or wattag초과했습니다.Ensure bulbs are within specified wattage limits (LED/CFL up to 150W, Incandescent/Halogen up to 300W). Try a different type of compatible bulb.
Switch does not respond after power restoration.Warm-up period not completed.Allow 30 seconds for the sensor to warm up and calibrate after power is restored.

11. 사양

제품 사양
기인하다세부 사항
모델 번호YM2112
전원코드식 전기
권tage120V AC, 60Hz
최대 부하(LED/CFL)150와트
Max Load (Incandescent/Halogen)300와트
장착 유형벽걸이형
감지 각도180도
최대 범위26피트(8미터)
작동 온도화씨 32도에서 화씨 104도(섭씨 0도에서 40도)
제품 크기(D x W x H)115D x 40W x 68H millimeters (4.53 x 1.57 x 2.68 inches)
품목 무게0.15파운드(68그램)
중성선필수의
원산지중국

12. 보증

The ECOELER Motion Sensor Light Switch (Model YM2112) comes with a one-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or service, please contact ECOELER customer support.

13. 지원

For technical assistance, troubleshooting, or general inquiries regarding your ECOELER Motion Sensor Light Switch, please contact our support team:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.