소개
The HOBBYWING EZRUN MAX5 G2 Plus ESC is a high-performance electronic speed controller designed for 1/5, 1/7, and 1/8 scale remote control vehicles. This manual provides essential information for the proper installation, operation, and maintenance of your ESC, ensuring optimal performance and longevity.
This image displays the HOBBYWING EZRUN MAX5 G2 Plus Electronic Speed Controller. It features a black casing with cooling fins, a central cooling fan, and various input/output wires for motor, battery, and receiver connections. A small external switch is also visible.
안전 정보
Please read and understand the following safety precautions before using the HOBBYWING EZRUN MAX5 G2 Plus ESC:
- Carefully check power devices and the car frame manual to ensure reasonable power pairing. Avoid incorrect pairing to prevent overload and motor damage.
- Always wire all parts of the equipment carefully. If any connections loosen due to vibration, your RC model may lose control.
- Never apply full throttle if the pinion is not installed. Extremely high RPMs without load can damage the motor.
- Never allow the motor case to exceed 100 degrees Celsius (212 degrees Fahrenheit), as high temperatures can demagnetize the magnets.
제품 특징
The EZRUN MAX5 G2 Plus ESC incorporates advanced design and technology, offering the following key features:
- 방수 센서 인터페이스: Features an innovative waterproof sensor interface, enhancing overall waterproof and dustproof performance. It is designed to handle harsh conditions, including sediment, ice, snow, and water accumulation.
- 강력한 BEC: Built-in ultra-powerful switch-mode BEC with support for 6V/7.4V/8.4V switching, compatible with a wide range of powerful, high-voltag전자 서보.
- Turbo Timing Settings: Supports turbo timing settings, delivering remarkable timing response when paired with a compatible motor.
- 통합 블루투스: The built-in Bluetooth function (integrated into the switch) allows users to configure and upgrade the ESC directly via the mobile app (HW LINK), eliminating the need for additional devices and making the process simpler and more convenient.
- 데이터 로깅: Includes a data logging function to view various performance metrics on the HW LINK app.
- 펌웨어 업그레이드: Supports firmware upgrades for the ESC, ensuring access to the latest features and enhancements.
명세서
| 특징 | 세부 사항 |
|---|---|
| 연속/피크 전류 | 330A / 2000A |
| 모터 유형 | 센서 및 센서리스 브러시리스 모터 |
| 응용 프로그램 | 1/7 and 1/8 vehicles for Extreme Speed, 1/5 Truck, Monster for Extreme Bashing |
| 지방세포 | 6-12S 리포 |
| BEC 출력 | 6V/7.4V/8.4V 조정 가능, 연속 전류 8A(스위치 모드) |
| 냉각 팬 | BEC vol로 구동tage |
| 치수(길이 x 너비 x 높이) | 94.5mm x 59.4mm x 51.6mm(3.72 x 2.34 x 2.03인치) |
| 무게 | 450g (1.08 pounds, included wires & connectors) |
| 프로그래밍 방법 | iOS 또는 Android 스마트폰(HW LINK 앱으로 설치) |
| 제조업체 권장 연령 | 5세 이상 |
설치 가이드
Follow these steps for initial setup of your HOBBYWING EZRUN MAX5 G2 Plus ESC:
- 모터를 연결하세요: Connect the motor wires to the corresponding output terminals on the ESC. Ensure correct polarity for sensored motors.
- 수신기에 연결: ESC의 스로틀 케이블을 RC 수신기의 스로틀 채널(일반적으로 2번 채널)에 연결하십시오.
- 배터리 연결: Connect your LiPo battery pack to the ESC's battery input connectors. Ensure correct polarity.
- Calibrate Throttle Range: Turn on your transmitter, then the ESC. Follow the specific calibration procedure outlined in the full HOBBYWING manual or via the HW LINK app to set the throttle endpoints.
- 초기 테스트: Perform a low-speed test to ensure all connections are secure and the motor responds correctly to throttle input.
작동 지침
To operate your RC vehicle with the EZRUN MAX5 G2 Plus ESC:
- Always power on your transmitter first, then the ESC. Power off the ESC first, then the transmitter.
- 배터리 용량 모니터링tage and motor temperature during operation to prevent damage.
- Utilize the HW LINK app for advanced settings, parameter adjustments, and real-time data monitoring.
- Avoid continuous full throttle operation without adequate cooling, especially in high-stress conditions.
유지
Regular maintenance helps ensure the longevity and performance of your ESC:
- Keep the ESC clean and free from dirt, dust, and debris. Use a soft brush or compressed air for cleaning.
- Regularly inspect all electrical connections (motor, battery, receiver) for tightness and signs of wear or corrosion.
- Ensure the cooling fan is unobstructed and functioning properly. Clean any blockages to maintain effective cooling.
- Store the ESC in a dry, cool environment when not in use.
문제 해결
If you encounter issues with your EZRUN MAX5 G2 Plus ESC, consider the following:
- ESC does not power on: Check battery connections, ensure the battery is charged, and verify the power switch is functioning.
- Motor stutters or runs irregularly: Inspect motor wire connections, check the sensor cable (if applicable) for damage, and ensure the motor is not overloaded.
- No throttle response: Re-calibrate the throttle range. Check receiver connection and transmitter battery.
- 과열: Ensure proper ventilation, check for motor overload, and verify the cooling fan is operational.
- Refer to HW LINK App: The HW LINK app often provides diagnostic information and error codes that can help identify specific problems.
상자 안에 무엇이 들어있나요?
Your HOBBYWING EZRUN MAX5 G2 Plus ESC package includes:
- (1) Ezrun MAX5 PLUS ESC
- (1) Manual (this document)
보증 및 지원
For detailed warranty information, technical support, or service inquiries regarding your HOBBYWING EZRUN MAX5 G2 Plus ESC, please contact HOBBYWING customer service directly or visit the official HOBBYWING web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
