소개
Welcome to your new Rydeen R10-SPL 10-inch Touchscreen Rear-View Mirror Monitor. This device integrates a high-definition front camera and a waterproof rear camera into a convenient mirror display, enhancing your driving safety and recording capabilities. This manual provides detailed instructions for installation, operation, and maintenance of your R10-SPL system.
주요 특징
- 10인치 터치스크린 디스플레이
- 1080P Front Camera with superior light suppression and low-light compensation
- IP67 Waterproof 1080P Rear Camera with Sony CMOS sensor and night vision capabilities
- G-Sensor for automatic impact detection and file 잠금
- Parking Monitoring for 24-hour surveillance (requires hardwire kit)
- Loop Recording for continuous video capture, overwriting oldest files when storage is full
- One-Wire Installation for simplified wiring
- Supports up to 256GB Micro SD Card for extended storage
- Assistant Parking Line functionality for reversing guidance
- Optional GPS for automatic time setting, speed indicator, and compass (GPS-001 antenna sold separately)
패키지 내용
The Rydeen R10-SPL package typically includes the following components:
- Rydeen R10-SPL 10-inch Touchscreen Rear-View Mirror Monitor (with integrated 1080p Front Camera)
- 1080p IP67 Waterproof Rear Camera
- 하드 와이어 키트
- Mirror Replacement Mount
- 장착 스트랩
- Necessary connection cables
- 사용 설명서 (본 문서)
설정 및 설치
1. Mounting the Mirror Monitor
The R10-SPL offers two primary mounting options: a mirror replacement mount for a permanent installation or straps for attaching over your existing rearview 거울.
Using the Mirror Replacement Mount:
This method provides a more integrated and factory-like appearance. Professional installation is recommended for optimal results.
Image: The back of the Rydeen R10-SPL mirror monitor showing the attachment point for a replacement mount. This mount allows for a more permanent and integrated installation into the vehicle.
Using the Strap-on Method:
Secure the monitor over your existing rearview mirror using the provided adjustable straps. Ensure the monitor is firmly attached and does not obstruct your view 또는 차량 제어를 방해합니다.
Image: The back of the Rydeen R10-SPL mirror monitor with two adjustable straps, designed for securing the unit over an existing vehicle rearview mirror for a non-invasive installation.
이미지: 비교 view showing two Rydeen R10-SPL units. One is equipped with a permanent replacement mount, and the other with adjustable straps, illustrating both available mounting methods.
2. 후방 카메라 연결
Mount the IP67 waterproof rear camera at the rear of your vehicle, typically above the license plate or near the trunk handle. Route the camera cable discreetly to the main mirror monitor unit. The system features a one-wire installation for simplified wiring, connecting the rear camera to the monitor.
Image: The compact, black rear camera unit for the Rydeen R10-SPL, featuring a central lens and a mounting bracket. This camera is IP67 waterproof for outdoor vehicle installation.
3. Power Connection (Hardwire Kit)
Use the included hardwire kit to connect the monitor to your vehicle's power supply. This connection is essential for enabling features such as 24-hour parking monitoring. Ensure proper connection to constant and accessory power sources, and a reliable ground point, following the hardwire kit's specific instructions.
4. 마이크로 SD 카드 삽입
Insert a compatible Micro SD card (up to 256GB, not included) into the designated slot on the monitor. The device requires a Micro SD card for recording and storing footage. Ensure the card is inserted correctly until it clicks into place.
5. Optional GPS Antenna (GPS-001)
If you are using the optional GPS-001 antenna, connect it to the designated port on the monitor. Mount the antenna in a location with a clear view of the sky, such as on the dashboard or near the windshield, for accurate signal reception and GPS functionality.
작동 지침
1. 전원 켜기 / 끄기
The monitor will typically power on automatically when the vehicle's ignition is turned on and power is supplied. To manually power off the device, press and hold the power button (refer to the product diagram for exact location, usually on the bottom edge of the mirror).
2. 터치스크린 인터페이스
Navigate the device's functions and settings using the responsive 10-inch touchscreen. Swipe gestures and taps are used to access menus, switch camera views, and adjust various parameters.
3. 카메라 View 스위칭
Tap the screen to cycle through different camera views: front camera only, rear camera only, or a split-screen display showing both simultaneously. This allows you to select the most suitable view for your driving situation.
4. 녹음 기능
- 루프 녹음: The device continuously records video in short segments (e.g., 1, 3, or 5 minutes). When the Micro SD card reaches its capacity, the oldest unprotected files are automatically overwritten to ensure continuous recording.
- G-센서: In the event of a sudden impact, collision, or abrupt braking, the built-in G-Sensor detects the event and automatically locks the current video file. This prevents the critical footage from being overwritten, preserving it as evidence.
- 주차 모니터링 : When the vehicle is parked and the hardwire kit is correctly installed, the monitor can detect impacts or motion around the vehicle. Upon detection, it will automatically begin recording, providing 24-hour surveillance and security.
5. 재생
Access the playback menu on the touchscreen to review 녹화된 비디오 files from both the front and rear cameras. Files are typically organized by date and time, allowing for easy navigation and review of specific events.
6. 설정 조정
Through the touchscreen menu, you can adjust various device settings. These include video resolution, loop recording duration, G-sensor sensitivity, parking monitoring settings, date/time, display brightness, and other system preferences.
7. Assistant Parking Line
When the vehicle is in reverse gear, the rear camera display will automatically show dynamic parking lines. These lines assist with parking maneuvers by providing visual guidance. The calibration of these lines can often be adjusted via the settings menu.
유지
1. 디스플레이 청소
Use a soft, lint-free cloth to gently wipe the touchscreen display. Avoid using abrasive cleaners, alcohol-based solutions, or solvents, as these can damage the screen coating.
2. Cleaning Camera Lenses
Ensure the front and rear camera lenses are clean and free from dirt, dust, or smudges for optimal video quality. Use a soft cloth, possibly dampened with a specialized lens cleaner if necessary. Avoid scratching the lens surface.
3. 마이크로 SD 카드 관리
To maintain optimal performance and prevent data corruption, it is recommended to periodically format the Micro SD card (at least once a month) through the device's settings. Always back up any important recordings before formatting.
4. 펌웨어 업데이트
Check the official Rydeen website for any available firmware updates for your R10-SPL device. Follow the instructions provided with the update package carefully to ensure proper installation and to benefit from new features or performance improvements.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않습니다. | No power supply; loose connection; faulty fuse. | Check all power connections. Ensure the hardwire kit is correctly installed and receiving power. Inspect vehicle's fuse box for blown fuses. |
| 녹음이 중단되거나 간헐적으로 진행됩니다. | Micro SD card full; card error; low-quality or incompatible card. | Format the Micro SD card through the device settings. Replace with a high-speed (Class 10 or U3 recommended), reputable brand Micro SD card if issues persist. |
| Rear camera image is blurry or black. | Lens dirty; cable loose or damaged; camera faulty. | Clean the rear camera lens. Check the rear camera cable connection at both ends. If problem persists, contact support. |
| 터치스크린이 응답하지 않습니다. | 일시적인 소프트웨어 오류; 화면 보호 필름 간섭. | Restart the device by cycling the vehicle's ignition or holding the power button. Ensure any screen protector is properly applied and not interfering. |
| 주차 모니터링이 작동하지 않습니다. | Hardwire kit not installed or incorrectly wired; settings incorrect. | Ensure the hardwire kit is correctly installed and connected to a constant power source. Verify parking monitoring settings are enabled in the device menu. |
명세서
- 제품 크기: 10 인치
- 비디오 입력 : Dual mirror front and rear (AHD)
- 언어: English, Japanese, French, Spanish
- Front Camera Sensor: 1080P / H:120° / 25 fps
- Rear Camera Sensor: Sony CMOS / 1080P / H:120° / 30 fps
- 저장: Built-in Micro-SD slot, up to 256GB
- 작동 온도: -20℃ ~ 70℃(-4°F ~ 158°F)
- 작동 습도: 20-70%HR
- 품목 무게: 약 2.5파운드(40온스)
- 제품 크기: 10 x 6 x 1.5 인치
- ASIN: B0F184CYNG
- 한국어: 810408029097
보증 및 지원
This Rydeen R10-SPL product is covered by a manufacturer's warranty. For specific warranty details, including duration and coverage, please refer to the product listing on Amazon or contact Rydeen customer support directly.
For technical assistance, troubleshooting, or further inquiries regarding your device, please visit the official Rydeen website or contact their customer service department. When seeking support, please have your purchase receipt and product model number (R10-SPL) readily available.
Rydeen Official Web대지: www.rydeenmobile.com