OREiN Motion Sensor Outdoor Lights, Smart Flood Light Outdoor

1. 중요 안전 지침

본 제품을 설치 또는 작동하기 전에 모든 지침을 읽고 이해하십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 재산 피해나 인명 피해를 초래할 수 있는 기타 위험이 발생할 수 있습니다.

• 설치 또는 정비 작업을 하기 전에 항상 회로 차단기나 퓨즈 박스에서 전원을 차단하십시오.
• 본 제품은 해당 설치 규정에 따라 제품의 구조, 작동 및 관련 위험을 잘 아는 사람이 설치해야 합니다.
• Use only UL-listed wire connectors for connections.
• 모든 연결 부분이 안전하고 적절히 절연되어 있는지 확인하세요.
• 가연성 물질 근처에 설치하지 마십시오.
• This fixture is designed for outdoor use and is rated for wet locations.

2. 제품 오버view

The OREiN Motion Sensor Outdoor Light is a smart flood light designed to provide efficient and responsive illumination for outdoor spaces. It features an integrated motion sensor for automatic activation and can be controlled via smart features for enhanced functionality.

그림 2.1: 일반 view of the OREiN Motion Sensor Outdoor Light. This image shows the overall design of the flood light, including the main light housing and the integrated motion sensor at the bottom.

3. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• OREiN Motion Sensor Outdoor Light Fixture
• 장착 브래킷
• 장착 나사 및 벽 앵커
• 전선 너트/커넥터
• 사용 설명서 (본 문서)

4. 설정 및 설치

4.1 시작하기 전에

• Turn off power at the circuit breaker or fuse box to the outlet box where the light will be installed.
• 설치 표면이 안정적이며 조명기구의 무게를 지탱할 수 있는지 확인하십시오.
• Gather necessary tools: screwdriver, wire strippers, drill (if needed).

4.2 조명 장착

1. 제공된 나사를 사용하여 장착 브래킷을 접속함에 부착하십시오. 브래킷이 단단히 고정되었는지 확인하십시오.
2. Connect the household wires to the fixture wires: black to black (live), white to white (neutral), and green/bare copper to green (ground). Secure connections with wire nuts.
3. 전선을 조심스럽게 접속함 안으로 넣어주세요.
4. 조명기구를 장착 브래킷에 맞춰 정렬한 후 제공된 나사를 사용하여 고정하십시오.
5. 물 침투를 방지하기 위해 조명기구가 장착면과 만나는 가장자리에 실리콘 실런트를 바르십시오.

4.3 배선도

Connect the black wire from the fixture to the black (live) wire from the household circuit. Connect the white wire from the fixture to the white (neutral) wire from the household circuit. Connect the green or bare copper ground wire from the fixture to the ground wire from the household circuit. Ensure all connections are tight and insulated.

5. 사용 설명서

5.1 전원 켜기

Once installation is complete, restore power at the circuit breaker. The light may cycle on and off once as it performs a self-test.

5.2 모션 센서 조정

The motion sensor can be adjusted for sensitivity and duration. Locate the adjustment dials or buttons on the sensor head.

• SENS(민감도): Adjusts the detection range of the motion sensor. Turn clockwise for higher sensitivity (longer range), counter-clockwise for lower sensitivity (shorter range).
• 시간(소요 시간): Sets how long the light stays on after motion is detected. Adjust to your desired duration (e.g., 30 seconds to 10 minutes).
• LUX (Dusk-to-Dawn): Determines the ambient light level at which the sensor becomes active. Turn towards the sun icon for daylight operation (test mode) or towards the moon icon for night-only operation.

5.3 Smart Features / App Control

For smart control features, download the OREiN Smart Home app from your device's app store. Follow the in-app instructions to pair your flood light with your Wi-Fi network. This will allow for remote control, scheduling, and advanced customization of light settings.

6. 유지관리

Regular maintenance ensures optimal performance and longevity of your OREiN Motion Sensor Outdoor Light.

• 청소: Periodically clean the lens and sensor with a soft, damp cloth to remove dirt, dust, or debris that may obstruct the sensor or reduce light output. Do not use abrasive cleaners.
• 점검: Annually inspect the fixture for any signs of damage, loose wiring, or corrosion. Ensure mounting screws are tight.
• 전원 주기: If the light behaves erratically, try turning off the power at the circuit breaker for 30 seconds and then restoring it.

7. 문제 해결

일반적인 문제와 해결 방법은 아래 표를 참조하세요.

8. 사양

9. 보증 및 지원

OREiN products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please refer to the product packaging or the official OREiN web구체적인 보증 약관은 해당 사이트에서 확인하세요.

For technical support, troubleshooting assistance, or warranty claims, please contact OREiN customer service:

• 이메일: support@orein.com (전ample email, please refer to actual product for contact details)
• Web대지: www.orein.com (전ample website, please refer to actual product for contact details)

When contacting support, please have your product model number (B0DZX3J993) and purchase date available.