QUI BQ100

QUI Presentation Clicker Wireless Presenter Remote (Model BQ100) Instruction Manual

Your essential guide to seamless presentations.

소개

Thank you for choosing the QUI Presentation Clicker Wireless Presenter Remote, Model BQ100. This device is designed to enhance your presentations by providing intuitive control over your slides and a built-in red laser pointer. With broad compatibility and a plug-and-play design, it's an ideal tool for educators, lecturers, and business professionals.

패키지 내용

  • 1 x QUI Wireless Presenter Remote (Model BQ100)
  • 1 x USB Receiver (stored inside the remote)
  • 1 x 사용자 설명서

Note: AAA battery is not included and must be purchased separately.

설치 가이드

1. 배터리 설치

The QUI Presentation Clicker requires one AAA battery for operation. To install:

  1. Gently slide open the battery compartment cover located on the back of the remote.
  2. Insert one AAA battery, ensuring the polarity (+/-) matches the indicators inside the compartment.
  3. 배터리 덮개를 단단히 닫으세요.
QUI Presentation Clicker with battery compartment open, showing AAA battery and USB receiver

Image: The QUI Presentation Clicker with its battery compartment open, revealing a AAA battery and the integrated USB receiver.

2. Connecting the USB Receiver (Plug & Play)

The remote uses a 2.4GHz wireless USB receiver for connection. No software installation is required.

  1. Carefully remove the USB receiver from its storage slot within the remote's battery compartment.
  2. Plug the USB receiver into an available USB port on your computer (laptop, desktop, electronic whiteboard, or projector).
  3. The computer should automatically detect and install the necessary drivers. This process may take a few seconds.
  4. Once installed, turn on the remote using the power switch located on its side. The remote is now ready for use.
QUI Presentation Clicker USB receiver being plugged into a laptop

Image: The USB receiver being inserted into a laptop's USB port, demonstrating the plug-and-play setup.

작동 지침

The QUI Presentation Clicker offers intuitive controls for a smooth presentation experience.

버튼 기능:

  • Page Up/Next Slide (▲): Press to advance to the next slide or scroll up.
  • Page Down/Previous Slide (▼): Press to go back to the previous slide or scroll down.
  • Laser Pointer (☀): Press and hold to activate the red laser pointer. Release to turn off.
  • Full/Black Screen (□): Press to toggle between full screen mode and a black screen.
  • 전원 스위치(켜짐/꺼짐): Slide to turn the remote on or off, conserving battery life when not in use.
Diagram of QUI Presentation Clicker buttons and their functions

Image: A detailed diagram illustrating each button on the QUI Presentation Clicker and its corresponding function, including the red light, power switch, black screen switching, pointer button, page down, full screen switching, page up, battery bay, and receiver.

무선 범위:

Enjoy freedom of movement with a wireless control range of up to 328 feet (100 meters). This allows you to interact with your audience and move around the presentation area without being tethered to your computer.

QUI Presentation Clicker demonstrating long-range control with a red laser pointer on a screen

Image: The QUI Presentation Clicker being used to point a red laser at a large screen, illustrating its long-range control capability of up to 328 feet.

공식 제품 비디오:

Video: A seller-provided video demonstrating the QUI wireless presentation clicker, highlighting its features and ease of use for teachers and presenters.

유지

  • 청소: Use a soft, dry cloth to clean the surface of the remote. Avoid using harsh chemicals or abrasive materials.
  • 배터리 교체: Replace the AAA battery when the remote's performance degrades or the indicator light (if present) signals low power. Always dispose of used batteries responsibly.
  • 저장: When not in use, turn off the remote and store the USB receiver inside its designated slot to prevent loss. Keep the device in a cool, dry place away from direct sunlight and extreme temperatures.

문제 해결

문제해결책
리모컨이 응답하지 않습니다.1. Ensure the remote is turned on. 2. Check if the AAA battery is inserted correctly and has sufficient charge. Replace if necessary. 3. Verify the USB receiver is securely plugged into the computer's USB port. 4. Try plugging the USB receiver into a different USB port.
Laser pointer is not working.1. Ensure the remote is turned on. 2. Press and hold the laser pointer button firmly. 3. Check battery level.
Slides are not advancing/going back.1. Ensure the USB receiver is properly connected and recognized by the computer. 2. Verify that your presentation software (PowerPoint, Google Slides, Keynote, etc.) is in focus and in presentation mode. 3. Check for any interference that might affect the wireless signal.
무선 범위가 제한적입니다.1. Ensure there are no large metallic objects or other wireless devices causing interference between the remote and the USB receiver. 2. Move closer to the computer.

명세서

  • 모델: BQ100
  • 무선 기술: 2.4GHz RF
  • 무선 범위: 최대 328피트(100미터)
  • 레이저 유형: Red Light Pointer
  • 배터리: AAA 배터리 1개(포함되지 않음)
  • 운영 체제 호환성: Mac OS, Windows 2003/XP/Vista/7/8/10 and above, Linux, Android
  • 소프트웨어 호환성 : PowerPoint, Excel, Prezi, Google Slides, iWork (Keynote, Numbers, Pages)
  • 치수: 4.4 x 1.8 x 1.1 인치
  • 품목 무게: 1.58 온스

보증 및 지원

For warranty information, technical support, or any inquiries regarding your QUI Presentation Clicker, please refer to the contact information provided with your purchase or visit the official QUI website. We are committed to providing high-quality products and excellent customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.