Dapper Supply 26.5갤런 11 피크 마력 습식/건식 진공청소기 사용 설명서

중요한 안전 정보

Please read and understand all safety warnings and operating instructions before using this wet/dry vacuum. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.

일반 안전 예방 조치:

• 진공 청소기를 플러그에 꽂은 채로 방치하지 마십시오. 사용하지 않을 때와 정비하기 전에는 콘센트에서 플러그를 뽑아 두십시오.
• 옥외나 젖은 표면에서는 사용하지 마십시오.
• 장난감으로 사용하지 마십시오. 어린이가 사용하거나 근처에서 사용할 때는 세심한 주의가 필요합니다.
• 본 설명서에 명시된 대로만 사용하십시오. 제조업체에서 권장하는 부속품만 사용하십시오.
• 손상된 코드나 플러그는 사용하지 마십시오. 진공 청소기가 제대로 작동하지 않거나, 떨어뜨렸거나, 손상되었거나, 실외에 방치되었거나, 물에 빠진 경우 서비스 센터로 반품하십시오.
• 코드를 잡아당기거나 운반하거나, 코드를 손잡이로 사용하거나, 코드로 문을 닫거나, 날카로운 모서리나 모서리 주변에서 코드를 당기지 마십시오. 코드에 진공 청소기를 돌리지 마십시오. 코드를 가열된 표면에 가까이 두지 마십시오.
• 코드를 잡아당겨서 플러그를 뽑지 마십시오. 플러그를 뽑으려면 코드가 아닌 플러그를 잡으십시오.
• 젖은 손으로 플러그나 진공청소기를 만지지 마세요.
• 개구부에 어떤 물건도 넣지 마십시오. 개구부가 막힌 상태에서 사용하지 마십시오. 먼지, 보푸라기, 머리카락 및 공기 흐름을 감소시킬 수 있는 모든 것이 없도록 하십시오.
• 머리카락, 느슨한 옷, 손가락 및 신체의 모든 부분을 구멍이나 움직이는 부품에서 멀리 두십시오.
• 담배, 성냥, 뜨거운 재 등 타고 있거나 연기가 나는 물건은 집어 올리지 마세요.
• 가솔린 등 가연성 또는 연소성 액체를 흡입하거나, 가연성 또는 연소성 액체가 있는 곳에서 사용하지 마십시오.
• 필터가 없는 상태에서는 사용하지 마십시오.
• 플러그를 뽑기 전에 모든 제어 장치를 끄세요.
• 계단을 청소할 때는 특별히 주의하세요.
• 올바르게 접지된 콘센트만 사용하세요.

제품 끝view 및 구성 요소

The Dapper Supply 26.5 Gallon 11 Peak HP Wet/Dry Vacuum is designed for versatile cleaning tasks, featuring a powerful motor and a durable stainless steel tank. It is suitable for both wet and dry debris pickup in various environments.

그림 1: Dapper Supply 26.5 Gallon Wet/Dry Vacuum. This image displays the complete vacuum unit with its stainless steel tank, motor head, hose, and floor nozzle attached.

주요 특징:

• 강력한 흡입력: 8100W peak motor, 26Kpa suction power, 206 CFM airflow, and 80.4 inches of Water Lift for effective cleaning.
• Durable Tank: 26.5-gallon rust-resistant stainless steel tank.
• 2-in-1 기능: Capable of both wet and dry vacuuming.
• 확장된 도달 범위: 13.2 ft power cord and 8.2 ft flexible hose.
• 이중 여과 시스템: Includes a wide filter for carpet/pet hair and a cylinder filter for fine particles.
• Built-in Drain Port: For convenient liquid disposal.
• 저소음 작동: Engineered for 78-80 dBA.
• 유동성: Smooth-rolling wheels and ergonomic carry handle.

포함된 액세서리:

그림 2: Included Accessories. This image shows the various attachments and filters that come with the vacuum, including a utility nozzle, round dust brush, extension wands, car nozzle, wide filter, dust collection bag, cylinder filter, and the EVA hose.

• 유틸리티 노즐
• 둥근 먼지 브러시
• 확장 완드
• 자동차 노즐
• Wide Filter (for carpet and pet hair)
• 먼지 수집 백
• Cylinder Filter (for fine particles and dust)
• 1-7/8" x 7' EVA Hose

설치 지침

Follow these steps to assemble your Dapper Supply Wet/Dry Vacuum before initial use.

1. 구성 요소 풀기: Carefully remove all parts from the packaging. Verify that all listed accessories are present.
2. 바퀴 부착: Securely attach the smooth-rolling wheels to the base of the vacuum tank. Ensure they are firmly in place for stability and mobility.
3. Install Motor Head: Place the motor head onto the stainless steel tank, aligning it correctly. Secure the motor head with the latches provided on the sides of the tank.
4. 호스를 연결하십시오: Insert the 1-7/8" x 7' EVA hose into the suction port on the tank. For blowing functions, connect the hose to the exhaust port.
5. Attach Extension Wands and Nozzle: Connect the extension wands to the hose, then attach the desired cleaning nozzle (e.g., floor brush, utility nozzle, crevice tool) to the end of the wands.
6. 필터 설치 :
   • 을 위한 건식 진공 청소기, install the cylinder filter over the float cage and secure it with the filter cap. A dust collection bag can also be used for easier disposal of dry debris.
   • 을 위한 습식 진공 청소, remove the cylinder filter and dust collection bag. Ensure the wide filter is in place if specified for wet use, or use without a filter if the wide filter is for dry use only (refer to filter instructions).

그림 3: Assembled Vacuum with Key Features. This image highlights the drain system, 11 Peak HP motor, and dual filtration system, indicating the vacuum's readiness for operation after assembly.

작동 지침

This section details how to use your Dapper Supply Wet/Dry Vacuum for various cleaning tasks.

1. 건식 진공 청소:

• Ensure the cylinder filter is properly installed over the float cage. For fine dust, a dust collection bag is recommended for easier disposal and to protect the filter.
• Connect the desired dry cleaning attachment (e.g., floor brush for large areas, crevice tool for tight spaces).
• 전원 코드를 접지된 콘센트에 꽂으세요.
• 전원 스위치를 사용하여 청소기를 켜세요.
• Begin vacuuming the dry debris.
• 작업이 끝나면 진공청소기를 끄고 플러그를 뽑으세요.

그림 4: Dual Filtration System. This image illustrates the two types of filters: a wide filter suitable for carpet and pet hair, and a cylinder filter for fine particles and dust, emphasizing the vacuum's versatility for different dry cleaning needs.

2. 습식 진공 청소:

• 중요한: Remove the cylinder filter and any dust collection bag before wet vacuuming. The wide filter may remain if it is designed for wet use; otherwise, remove all filters.
• Connect the appropriate wet cleaning attachment.
• 전원 코드를 접지된 콘센트에 꽂으세요.
• 진공을 켜십시오.
• Begin vacuuming liquids. The internal float mechanism will shut off suction when the tank is full to prevent overflow.
• When the tank is full or you are finished, turn the vacuum OFF and unplug it.
• Empty the tank using the built-in drain port.

그림 5: Built-in Drain Port. This image shows the integrated drain port at the bottom of the vacuum tank, designed for quick and hassle-free disposal of collected liquids without heavy lifting.

3. 송풍 기능:

• Locate the exhaust port on the motor head.
• Connect the vacuum hose to the exhaust port.
• 전원 코드를 접지된 콘센트에 꽂으세요.
• Turn the vacuum ON. The vacuum will now function as a blower, useful for clearing leaves or debris from driveways and workshops.
• 작업이 끝나면 진공청소기를 끄고 플러그를 뽑으세요.

그림 6: Versatile Cleaning Applications. This image demonstrates the vacuum's ability to clean various surfaces and environments, including garages, car interiors, homes, and workspaces, highlighting its adaptability for both wet and dry tasks.

유지

Regular maintenance ensures optimal performance and extends the lifespan of your Dapper Supply Wet/Dry Vacuum. Always unplug the vacuum before performing any maintenance.

1. 탱크 비우기:

• For dry debris, unlatch the motor head and carefully lift it off the tank. Dispose of the contents of the dust collection bag or directly from the tank.
• For liquids, position the vacuum over a drain or suitable receptacle. Unscrew the cap of the built-in drain port at the bottom of the tank to allow liquids to flow out. Once empty, securely replace the cap.

2. 필터 청소 및 교체:

Reduced suction power often indicates a clogged filter. Clean or replace filters as needed.

그림 7: Filter Cleaning Guide. This image provides visual instructions on how to clean the vacuum's filter to restore suction power, showing steps for removing and cleaning the filter element.

1. 필터 제거: Unlatch the motor head and remove it. Carefully detach the cylinder filter from the float cage.
2. 필터 청소:
   • For dry filters, gently tap the filter against a hard surface to dislodge dust. A soft brush can also be used.
   • For washable filters (check filter type), rinse under running water until clean. Allow to air dry completely before reinstallation.
3. 필터 재설치: Once clean and dry, place the filter back onto the float cage and secure the motor head.
4. 필터 교체: If the filter is damaged or excessively dirty and cannot be cleaned effectively, replace it with a new Dapper Supply compatible filter.

3. Hose and Accessory Cleaning:

• Inspect the hose and attachments for blockages. Clear any obstructions.
• Wipe down the exterior of the vacuum, hose, and accessories with a damp 천. 독한 화학 물질을 사용하지 마십시오.

문제 해결

고객 지원팀에 문의하기 전에 다음 표를 참조하여 일반적인 문제와 해결 방법을 확인하세요.

제품 사양

보증 및 고객 지원

This Dapper Supply Wet/Dry Vacuum is backed by a 1년 보증, ensuring reliability and customer satisfaction. The product is UL certified for safety.

For warranty claims, technical assistance, or any questions regarding your product, please contact Dapper Supply customer support. Responsive customer support is available to assist you.

Please have your model number and purchase date available when contacting support.