CREWORKS 6L Ultrasonic Cleaner

CREWORKS 6L Ultrasonic Cleaner User Manual

Model: 6L Ultrasonic Cleaner with Degas & Gentle Modes

1. 서론

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your CREWORKS 6L Ultrasonic Cleaner. This device utilizes ultrasonic cavitation to thoroughly clean various items, offering both Degas and Gentle cleaning modes for optimal results. Please read this manual carefully before use and retain it for future reference.

2. 안전 정보

  • 항상 접지된 전원 콘센트에 장치를 연결하세요.
  • 탱크에 세척액이 없는 상태에서 청소기를 작동하지 마십시오.
  • Ensure the power cord is not damaged and avoid pulling it to disconnect.
  • 감전 사고를 방지하기 위해 제품을 물이나 기타 액체로부터 멀리하십시오.
  • 본체를 물에 담그지 마십시오.
  • 청소 또는 유지보수를 수행하기 전에 장치의 플러그를 뽑으십시오.
  • 어린이의 손이 닿지 않는 곳에 보관하세요.
  • Use only recommended cleaning solutions. Avoid flammable or corrosive liquids.
  • Do not touch the tank or solution during operation, as it may become hot.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

  • CREWORKS 6L Ultrasonic Cleaner Unit
  • 스테인리스 스틸 청소 바구니
  • 뚜껑
  • 전원 코드
  • 34 fl oz (1000 mL) CREWORKS Heavy Duty Cleaner & Degreaser Solution
  • 사용 설명서 (본 문서)

4. 설정

  1. 놓기: Place the ultrasonic cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation around the unit.
  2. 탱크를 채우세요: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the 'MIN' and 'MAX' marks. For general cleaning, use water. For enhanced cleaning, use the provided CREWORKS Heavy Duty Cleaner & Degreaser solution diluted at a 1:10 ratio with water.
  3. 장바구니에 담기: 청소 바구니를 탱크에 넣으세요.
  4. 전원 연결: Plug the power cord into the unit's power inlet, then connect it to a grounded electrical outlet.
CREWORKS 6L Ultrasonic Cleaner with lid open and basket inside
Image: The CREWORKS 6L Ultrasonic Cleaner with its lid open, showing the stainless steel tank and cleaning basket ready for filling with solution.

5. 사용 설명서

The CREWORKS 6L Ultrasonic Cleaner features intuitive controls for temperature, time, and cleaning modes.

Close-up of CREWORKS Ultrasonic Cleaner control panel with temperature and timer knobs
이미지: 자세한 view of the control panel, highlighting the temperature and timer adjustment knobs, along with indicators for Degas and Gentle modes.
  1. 전원 켜기: Turn the main power switch to the 'ON' position. The digital display will illuminate.
  2. 설정 온도: Use the 'TEMP' knob to set the desired cleaning temperature. The temperature range is 70-210°F (20-100°C). Heating helps improve cleaning efficiency, especially for stubborn grime.
  3. 타이머 설정 : Use the 'TIME' knob to set the cleaning duration. The timer can be set from 1 to 30 minutes. For delicate items, start with a shorter duration.
  4. 청소 모드 선택:
    • 탈기 모드: Press the 'DEGAS' button. This mode removes dissolved gases from the cleaning solution, which can improve ultrasonic efficiency and prevent oxidation of cleaned objects. It is recommended to run a degas cycle for a few minutes when using fresh solution.
    • 부드러운 모드: Press the 'GENTLE' button. This mode reduces the ultrasonic intensity, providing a softer cleaning action suitable for delicate or sensitive items that might be damaged by full power cavitation.
  5. 청소 시작: Once temperature, time, and mode are set, press the 'ON/OFF' button to start the ultrasonic cleaning process. The unit will automatically stop when the timer expires.
  6. 청소 후: Turn off the unit, unplug it, and carefully remove the cleaning basket. Rinse the cleaned items with clean water and dry them thoroughly.
CREWORKS Ultrasonic Cleaner cleaning a pair of glasses
Image: The ultrasonic cleaner in operation, effectively cleaning a pair of eyeglasses submerged in the solution within the basket.
CREWORKS Ultrasonic Cleaner with various items it can clean, including tools, toys, tableware, oral appliances, and glasses
Image: A visual representation of the wide range of applications for the ultrasonic cleaner, showing examples of items such as tools, toys, tableware, oral appliances, and glasses.

6. Using the CREWORKS Heavy Duty Cleaner & Degreaser Solution

The included 34 fl oz CREWORKS Heavy Duty Cleaner & Degreaser solution is designed to enhance the cleaning power of your ultrasonic cleaner, particularly for stubborn grease, oil, and grime.

CREWORKS Heavy Duty Cleaner & Degreaser solution bottle
Image: The CREWORKS Heavy Duty Cleaner & Degreaser solution bottle, formulated for effective cleaning and degreasing.
  • 노동 희석: This is a concentrated solution. Dilute it with water at a 1:10 ratio (1 part solution to 10 parts water) before adding it to the ultrasonic cleaner tank.
  • 응용 프로그램: Ideal for cleaning engine parts, carburetors, gun parts, electronic components, bicycle chains, metals, and plastics. It effectively removes grease buildup, persistent residues, tight corner grime, and stubborn stains.
  • 호환성: Safe for use with most metals, alloys, and plastics. Always test on an inconspicuous area first if unsure.
Various items that can be cleaned with CREWORKS Heavy Duty Cleaner & Degreaser, including electronic components, carburetors, gun parts, engine parts, bicycle chains, metals, and plastics
Image: An illustration showing the diverse range of items that can be effectively cleaned using the CREWORKS Heavy Duty Cleaner & Degreaser solution.
Before and after images of a bicycle chain cleaned with CREWORKS Heavy Duty Cleaner & Degreaser, showing visible cleaning effect
Image: A comparison demonstrating the visible cleaning effect of the solution, with a dirty bicycle chain shown before cleaning and a sparkling clean chain after treatment.

7. 유지관리 및 청소

  1. 탱크 배수: After each use, especially with cleaning solutions, drain the tank. Use the drain valve located on the side of the unit to empty the liquid into a suitable container.
  2. 탱크 청소: 스테인리스 스틸 탱크를 깨끗한 물로 헹구십시오. 부드러운 천으로 제품의 내부와 외부를 닦으십시오.amp 천으로 닦아주세요. 연마성 세제를 사용하거나 본체를 물에 담그지 마세요.
  3. 저장: Ensure the unit is completely dry before storing. Store in a cool, dry place away from direct sunlight and moisture.

8. 문제 해결

문제가능한 원인해결책
장치의 전원이 켜지지 않음전원 공급 안 됨; 전원 코드 느슨함; 메인 스위치 꺼짐Check power outlet; Ensure power cord is securely plugged in; Turn main switch to 'ON'
초음파 기능이 작동하지 않습니다No liquid in tank; Timer not set; Unit overheatedFill tank with liquid; Set timer; Allow unit to cool down
청소 결과 불량Incorrect cleaning solution; Insufficient cleaning time/temperature; Overloaded tank; Degas cycle not performedUse appropriate solution (e.g., CREWORKS Degreaser); Increase time/temperature; Do not overload; Run a degas cycle for fresh solution
Solution not heatingHeater not activated; Temperature set too lowEnsure temperature knob is set above ambient; Allow time for heating

9. 사양

  • 모델: CREWORKS 6L Ultrasonic Cleaner
  • 탱크 용량: 6리터
  • 초음파 전력: 180와트
  • 난방 전력 : 300와트
  • 초음파 주파수: 40kHz
  • 온도 조절: 70-210°F(20-100°C)
  • 타이머 제어: 1-30분
  • 모드: Degas, Gentle
  • 세척 용액: CREWORKS Heavy Duty Cleaner & Degreaser (34 fl oz)
  • ASIN: B0DYJCGRNQ
  • 첫 이용 가능 날짜: 26년 2025월 XNUMX일

10. 보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the official CREWORKS web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.