POMIACAM MOT-51C OTDR 광섬유 테스터 사용 설명서

1. 서론

This manual provides detailed instructions for the operation, maintenance, and troubleshooting of the POMIACAM MOT-51C OTDR Fiber Optic Tester. This device is designed for comprehensive fiber optic network analysis, offering functionalities such as Optical Time Domain Reflectometry (OTDR), Optical Power Meter (OPM), Visual Fault Locator (VFL), Light Source (LS), Optical Loss Test (OLT), and various cable testing features. Please read this manual thoroughly before using the device to ensure proper and safe operation.

2. 안전 정보

부상 및 기기 손상을 방지하기 위해 다음 안전 수칙을 준수하십시오.

• 장치를 극한의 온도, 습도 또는 직사광선에 노출시키지 마십시오.
• 장치를 떨어뜨리거나 강한 충격을 가하지 마십시오.
• 장치를 열거나 개조하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
• 기기를 충전할 때는 지정된 충전 케이블과 전원 어댑터(별도 구매)만 사용하십시오.
• 레이저 안전 : The VFL and Light Source emit laser radiation. Avoid direct eye exposure to the laser beam. Do not look directly into the optical ports when the device is active.
• Ensure proper ventilation when operating or charging the device.
• 현지 규정에 따라 배터리를 폐기하십시오.

3. 패키지 내용

아래 나열된 모든 품목이 패키지에 들어 있는지 확인하세요.

The complete package contents for the POMIACAM MOT-51C OTDR, including the main unit, cable tracker, USB cable, carrying case, quick guide, and calibration certificate.

• POMIACAM MOT-51C OTDR Main Unit
• Cable Tracker (for RJ45/BNC)
• USB 충전 케이블
• 보호용 운반 케이스
• OTDR Quick Guide
• 교정 인증서
• Note: A charging adapter is not included in the package.

4. 제품 오버view

The MOT-51C features a robust design with a 5.55-inch OLED touch screen for intuitive operation. Below are the key components and interfaces of the device.

4.1 장치 인터페이스

상세한 view of the top interface of the MOT-51C OTDR, highlighting the power button, network testing port, VFL, OPM, and OTDR/LS ports.

상세한 view of the side interface of the MOT-51C OTDR, showing the LED lamp, Type-C input, UTP/Cable tracer port, Micro SD slot, DC5V/2A power output, and RS 485 port.

• 전원 버튼: 장치를 켜거나 끕니다.
• Network Testing Port (LAN/RJ45 TDR): For RJ45 cable testing.
• VFL Port: Visual Fault Locator output.
• OPM Port: Optical Power Meter input.
• OTDR/LS Port: Optical Time Domain Reflectometer and Light Source output.
• LED 엘amp: 조명을 제공합니다.
• Type-C 5V2A Input: 장치를 충전합니다.
• UTP / Cable Tracer Port: For connecting the cable tracer unit.
• 마이크로 SD 카드 슬롯: 외부 저장용.
• DC5V 1A Power Output (USB): Functions as a power bank.
• RS 485 포트: For specific communication needs.

5. 설정

5.1 Battery Installation and Initial Use

The MOT-51C OTDR unit with an illustration of its 3.7V 4000mA Li-ion battery and a note about removing the battery isolation paper before first use. The screen shows the main menu.

1. 배터리 절연: Before first use, open the battery cover and remove the paper piece isolating the battery. This prevents battery discharge during shipping.
2. 충전 중: Connect the device to a 5V/2A USB power adapter (not included) using the provided Type-C USB cable. The device has a 3.7V 4000mAh Li-ion battery. A full charge takes approximately 3.5 hours and provides up to 6 hours of normal working time.
3. 전원 켜기/끄기: Press and hold the Power Button located on the top of the device to turn it on or off.

6. 사용 설명서

The MOT-51C features a 5.55-inch OLED touch screen with a resolution of 1280x720 for easy navigation and operation.

The POMIACAM MOT-51C OTDR Fiber Optic Tester main unit shown alongside its accompanying cable tracker. The screen displays the main menu with various testing functions.

6.1 OTDR Test

The OTDR function is used to characterize optical fibers. It measures fiber length, loss, attenuation parameters, and generates an event map to locate link points and fusion points.

The MOT-51C OTDR's 5.55-inch OLED touch screen displaying an OTDR test curve with event list and parameters, indicating 1310/1550nm wavelengths and 24/26dB dynamic range.

• 파장: 1310/1550nm.
• 다이나믹 레인지: 26/24dB.
• Max Test Range: 최대 100km.
• 작업: Select "OTDR" from the main menu. Configure test parameters such as range, pulse width, and average time. Initiate the test. The device will automatically analyze linkers and fusion points.
• Curve Analysis: The touch screen allows zooming and moving of test curves to display details.
• 보고: Test reports can be generated, including waveform graphs, parameter settings, fiber event information, and fiber connection information. Reports can be saved in EXCEL, PDF, or screenshot formats.
• Note: This 1310nm/1550nm model cannot test live fiber.

6.2 광 파워 미터(OPM)

The OPM measures the optical power of a fiber optic signal.

• Calibrated Wavelengths: 850/1300/1310/1490/1550/1625nm.
• 작업: Select "OPM" from the main menu. Connect the fiber to the OPM port. The device will display the measured optical power.

6.3 시각적 결함 탐지기(VFL)

The VFL emits a visible red laser to locate breaks, bends, and poor connections in fiber optic cables over short distances.

• 파장: 650 nm.
• Max Test Range: 최대 8km.
• 작업: Select "VFL" from the main menu. Connect the fiber to the VFL port. Activate the laser. Observe the fiber for red light leakage at fault points.
• 안전 경고: Avoid direct eye exposure to the VFL laser.

6.4 Light Source (LS)

The LS provides a stable optical signal for various testing purposes, often used in conjunction with an OPM for loss measurements.

• 모드: CW (Continuous Wave), 270 Hz, 330 Hz, 1 kHz, 2 kHz.
• 작업: Select "Light Source" from the main menu. Choose the desired wavelength and modulation mode. Connect the fiber to the OTDR/LS port.

6.5 Optical Loss Test (OLT)

The OLT function is used to measure the insertion loss of optical passive devices or fiber links.

• 작업: Select "Optical Loss Test" from the main menu. This typically involves using the Light Source and OPM functions together to measure loss.

6.6 Multi-Functional Cable Testing

The device includes capabilities for testing copper cables.

• RJ45 케이블 TDR 테스트: Detects near-end, mid-end, and far-end faults in RJ45 cables. Maximum test length is 600 meters.
• 케이블 길이 측정: Measures cable length for BNC, Cat 5/6, and elevator cables up to 1.5 kilometers.
• 작업: Select "Cable Tester" or "Cable Length" from the main menu. Follow on-screen prompts to connect the cable and perform the test.

6.7 추가 기능

• 핑 테스트: For network connectivity diagnostics.
• USB 5V 1A Power Output: The device can function as a power bank to charge other small electronic devices.
• FTP Server Support: 허용합니다 file 전송 기능
• 온라인 업데이트: Supports firmware updates via an internet connection.
• 설정: Access the "Settings" menu to configure device parameters such as language, date, time, display brightness, and other system preferences.

7. 유지관리

• 청소: Use a soft, dry cloth to clean the device's exterior. For the optical ports, use specialized fiber optic cleaning tools and solutions to prevent contamination.
• 저장: Store the device in its protective carrying case in a cool, dry place when not in use. Avoid environments with high humidity or extreme temperatures.
• 배터리 관리 : 배터리 수명을 연장하려면 배터리를 자주 완전히 방전하지 마십시오. 장기간 보관할 경우 배터리를 약 50%까지 충전하고 몇 달에 한 번씩 재충전하십시오.
• 소프트웨어 업데이트: Regularly check for and install online updates to ensure optimal performance and access to new features.

8. 문제 해결

9. 사양

10. 보증 및 지원

POMIACAM products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official POMIACAM web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.