Alarm.com ADC-AC-ET25 Keypad Reader User Manual

1. 서론

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Alarm.com ADC-AC-ET25 Keypad Reader. Designed for Smarter Access Control, this reader integrates multiple credential technologies to enhance security and flexibility for businesses.

주요 특징:

• Multiple Technologies: Supports Proximity, NFC, and Bluetooth Low Energy (BLE) credentials in a single device.
• Mobile Credentials: Enables the use of smartphones to unlock doors, reducing reliance on physical badges.
• OSDP Auto-Detect & Secure Channel: Ensures secure communication and automatic detection of OSDP devices.
• 펌웨어 업그레이드 가능성: Supports remote firmware updates for continuous improvement and security enhancements.
• Credential Support: Compatible with I-FARE DESFire EV1 & EV2, and LEAF credentials for secure, open interoperability. Also supports FSK and ASK legacy proximity credentials for seamless transitions.
• Tamp어 탐지: Features accelerometer-based tamper detection for enhanced security.
• Visual & Audible Indicators: Equipped with a tri-state LED light bar (red, green, amber) and an audible beeper for status feedback.
• 다양한 설치: 실내 및 실외 환경 모두에 적합합니다.

2. 안전 정보

기기를 설치하거나 작동하기 전에 모든 안전 지침을 주의 깊게 읽어 주십시오. 이 지침을 따르지 않을 경우 기기, 재산 또는 개인에게 손상이 발생할 수 있습니다.

• 모든 전기 연결은 자격을 갖춘 전문가가 수행하고 해당 지역의 전기 규정을 준수해야 합니다.
• 설치 또는 유지보수 작업을 하기 전에 전원을 차단하십시오.
• Do not expose the device to extreme temperatures, humidity, or direct water immersion beyond its specified environmental ratings.
• Avoid placing the device near strong electromagnetic fields, which may interfere with its operation.
• 기기를 직접 분해하거나 수리하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.

3. 패키지 내용

설치를 진행하기 전에 패키지에 모든 품목이 들어 있는지 확인하세요.

• Alarm.com ADC-AC-ET25 Keypad Reader
• 장착 하드웨어(나사, 앵커)
• 설치 템플릿(해당하는 경우)
• 빠른 시작 가이드(자세한 내용은 이 설명서를 참조하세요)

4. 제품 오버view

The ADC-AC-ET25 Keypad Reader is a robust access control device featuring a numeric keypad and multi-technology credential reading capabilities. Its design allows for seamless integration into various security systems.

그림 4.1: 앞쪽 view of the Alarm.com ADC-AC-ET25 Keypad Reader. The device is black with a prominent numeric keypad (0-9, *, #) in the center. A green LED light bar is visible at the top, indicating operational status. The "ALARM.COM" logo is located at the bottom.

구성 요소:

• 키패드 : Numeric keys (0-9), asterisk (*), and hash (#) for PIN entry.
• LED 라이트 바: Tri-state (red, green, amber) indicator for status feedback.
• Credential Reader Area: Integrated area for Proximity, NFC, and BLE mobile credential scanning.
• Tamper 센서: Accelerometer-based sensor to detect unauthorized removal or tamp에링.

5. 설정 및 설치

The ADC-AC-ET25 Keypad Reader is designed for flexible installation in both indoor and outdoor environments. Proper installation is crucial for optimal performance and security.

5.1. 설치 전 점검 목록:

• Verify the mounting surface is suitable and secure.
• Ensure proper wiring and power supply are available at the installation site.
• Confirm compatibility with your existing access control panel (supports OSDP).

5.2. 장착:

1. 접근성과 환경적 요인을 고려하여 적절한 설치 위치를 선택하십시오.
2. Use the provided mounting template to mark drilling points on the wall.
3. 구멍을 뚫고 필요한 경우 앵커를 삽입합니다.
4. Secure the reader's backplate to the wall using the provided screws.

5.3. 배선:

Connect the reader to your access control panel according to the wiring diagram provided with your panel and the reader's specific wiring instructions (typically found on the back of the reader or in a dedicated wiring guide). The reader supports OSDP Auto-Detect and Secure Channel for enhanced communication security.

5.4. 전원 켜기:

Once wiring is complete and verified, apply power to the access control system. The reader's LED light bar will indicate its power-up sequence and operational status.

6. 사용 설명서

The ADC-AC-ET25 Keypad Reader offers multiple methods for access, providing flexibility for users.

6.1. Using Credentials:

• Proximity/NFC Cards/Fobs: Present your compatible card or fob within close proximity to the reader's front surface. The reader will emit an audible beep and the LED will change color (typically green) upon successful read.
• Bluetooth Low Energy (BLE) Mobile Credentials: Ensure your smartphone has the Alarm.com mobile access app installed and BLE is enabled. Approach the reader with your phone. The app will communicate with the reader to grant access.

6.2. Using the Keypad (PIN Entry):

1. Enter your assigned Personal Identification Number (PIN) using the numeric keypad.
2. Press the hash (#) key to confirm your entry.
3. Upon successful PIN entry, the reader will provide an audible and visual confirmation (e.g., green LED).

6.3. LED Indicator Meanings:

• 녹색: Access granted, successful credential read, or system ready.
• 빨간색: Access denied, error, or system fault.
• 호박색: Standby, processing, or specific system status (refer to your access control system documentation for detailed amber indications).

7. 유지관리

Regular maintenance ensures the longevity and optimal performance of your ADC-AC-ET25 Keypad Reader.

• 청소: 부드러운 d를 사용하세요amp cloth to clean the exterior of the reader. Do not use abrasive cleaners, solvents, or excessive moisture.
• 펌웨어 업데이트: The reader supports remote firmware upgradability. Your access control system administrator will manage these updates to ensure the device has the latest features and security patches.
• 점검: 리더기에 물리적 손상이나 연결 불량이 있는지 주기적으로 점검하십시오.

8. 문제 해결

This section addresses common issues you might encounter with the ADC-AC-ET25 Keypad Reader.

• Reader is unresponsive (no lights, no sound):
  • Check power supply to the reader and access control panel.
  • 배선 연결이 안전하고 올바른지 확인하십시오.
• Credential not granting access (red LED):
  • Ensure the credential is valid and active in the access control system.
  • Confirm the credential type is supported by the reader (Proximity, NFC, BLE).
  • Try presenting the credential again, ensuring proper alignment.
• Keypad entry not working:
  • Verify the PIN is correct and active.
  • Ensure the hash (#) key is pressed after entering the PIN.
• Tamper alarm triggered:
  • Check if the reader has been dislodged or moved from its mounting.
  • Securely re-mount the reader if necessary.

For persistent issues, contact your system administrator or technical support.

9. 사양

10. 보증 정보

Specific warranty terms and conditions for the Alarm.com ADC-AC-ET25 Keypad Reader are typically provided at the point of purchase or by the manufacturer. Please refer to the documentation included with your purchase or contact your seller/installer for detailed warranty information. Keep your proof of purchase for warranty claims.

11. 고객 지원

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact your authorized Alarm.com dealer or the seller from whom you purchased the product. Provide your product model number (ADC-AC-ET10) and a detailed description of the issue when seeking support.

제조업체: 알람닷컴