QSZN Hiworld FDF2 16-PIN Android Canbus Box and Wiring Harness Adaptor User Manual

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of the QSZN Hiworld FDF2 16-PIN Android Canbus Box and Wiring Harness Adaptor. This product is designed to integrate an aftermarket Android car radio with your vehicle's existing electrical system, enabling functions such as steering wheel controls, door status, and other vehicle data communication through the Canbus protocol.

호환 차량:

• 포드 레인저
• 포드 포커스
• 포드 엣지
• Ford Kuga
• Ford Everest

2. 패키지 내용

아래 나열된 모든 품목이 패키지에 들어 있는지 확인하세요.

• 1 x QSZN Hiworld FDF2 Canbus Box
• 1 x 16-PIN Wiring Harness Adaptor

Image 2.1: The QSZN Hiworld FDF2 Canbus Box and its accompanying wiring harness adaptor.

3. 설정 및 설치

Installation of the Canbus box and wiring harness requires basic knowledge of car audio wiring. If you are unsure, it is recommended to seek professional assistance.

3.1. 안전수칙

• 단락 및 손상을 방지하기 위해 전기 작업을 시작하기 전에 항상 차량 배터리의 음극 단자를 분리하십시오.
• 차량의 시동이 꺼져 있는지 확인하십시오.
• 적절한 도구를 사용하고 보호 장비를 착용하세요.

3.2. 설치 단계

1. Remove Existing Car Radio: Carefully remove your vehicle's factory car radio or existing aftermarket unit. Refer to your vehicle's service manual for specific instructions on dash disassembly.
2. 차량 배선을 확인하십시오: Locate the vehicle's factory wiring harness connector. This is where the new adaptor will connect.
3. Connect Wiring Harness Adaptor: Connect the vehicle-specific end of the QSZN 16-PIN Wiring Harness Adaptor to your vehicle's factory wiring harness. Ensure a secure and snug fit.


Image 3.1: Close-up of the QSZN wiring harness connectors, showing the various pins for connection.

4. Canbus Box 연결: Locate the dedicated connector on the wiring harness adaptor designed for the Canbus box. Plug the QSZN Hiworld FDF2 Canbus Box into this connector. Ensure the connection is firm.


이미지 3.2: 측면 view of the QSZN Hiworld FDF2 Canbus Box, illustrating the specific port for harness connection.



Image 3.3: The QSZN Hiworld FDF2 Canbus Box, displaying its identification label and QR code for product information or support. The QR code links to WhatsApp 지원.

5. 안드로이드 헤드 유닛에 연결: Connect the remaining end of the 16-PIN Wiring Harness Adaptor to the corresponding port on your aftermarket Android car radio.
6. 안전한 배선: Route all cables neatly and securely to prevent pinching or interference. Ensure the Canbus box is placed in a location where it will not be damaged or interfere with other components.
7. 테스트 기능: Reconnect the vehicle's negative battery terminal. Turn on the ignition and test the Android car radio. Verify that steering wheel controls, reverse camera input (if applicable), and other vehicle-specific functions are working correctly.
8. 대시를 다시 조립하세요: 모든 기능이 정상적으로 작동하는지 확인한 후, 차량 대시보드 구성품을 조심스럽게 재조립하십시오.

4. 사용 설명서

The QSZN Hiworld FDF2 Canbus Box operates automatically once correctly installed. Its primary function is to translate vehicle data (such as ignition status, speed, reverse gear, handbrake, and steering wheel control signals) into a format that your aftermarket Android car radio can understand and utilize.

• 스티어링 휠 컨트롤: After installation, your Android head unit should automatically detect and allow configuration of your vehicle's steering wheel controls. Refer to your Android head unit's manual for specific instructions on mapping these controls.
• 차량 정보: Depending on your Android head unit's capabilities, the Canbus box may enable the display of certain vehicle information (e.g., door open warnings, climate control status) on the head unit screen.

5. 유지관리

The QSZN Hiworld FDF2 Canbus Box is a sealed electronic component and requires minimal maintenance.

• 연결 무결성: 모든 배선 연결부가 단단히 고정되어 있고 부식되지 않았는지 주기적으로 점검하십시오.
• 환경 보호: Ensure the Canbus box is installed in a dry location, away from direct moisture and extreme temperatures.
• 청소: If necessary, gently wipe the exterior of the Canbus box with a dry, soft cloth. Do not use liquid cleaners or solvents.

6. 문제 해결

If you encounter issues after installation, perform the following basic troubleshooting steps:

• 헤드 유닛에 전원이 공급되지 않음:
  • Check all power connections from the vehicle to the wiring harness and to the head unit.
  • 자동차 라디오와 관련된 차량 퓨즈를 확인하세요.
• 스티어링 휠 컨트롤이 작동하지 않음:
  • Ensure the Canbus box is securely connected to the wiring harness.
  • Check the settings within your Android head unit for steering wheel control configuration. Some head units require manual learning or selection of the correct Canbus protocol.
• Incorrect Vehicle Data Display:
  • Confirm the Canbus box is the correct model for your specific vehicle and year.
  • Check for firmware updates for your Android head unit, as these can sometimes improve Canbus compatibility.
• 간헐적인 기능:
  • 모든 연결부가 헐거워지거나 손상된 부분이 있는지 점검하십시오.
  • 전선이 꼬이거나 합선되지 않도록 하십시오.

문제가 지속되면 고객 지원에 문의하여 추가 지원을 받으십시오.

7. 사양

8. 보증 정보

Specific warranty terms and conditions for the QSZN Hiworld FDF2 Canbus Box are provided by the seller at the time of purchase. Please retain your proof of purchase for any warranty claims. For detailed information regarding warranty coverage, duration, and procedures, please contact your original point of sale.

9. 지원

For technical assistance, installation queries, or troubleshooting support, please contact our customer service team. You can reach us via the following methods:

• WhatsApp 지원: Scan the QR code on the product packaging or Canbus box, or click this link: WhatsApp 지원