Tyger Auto Tyger Access Running Boards Instruction Manual

1. 제품 오버view

The Tyger Auto Tyger Access Running Boards are designed to provide a convenient and secure step for easier entry and exit from your vehicle. Constructed from durable carbon steel with a textured black finish, these running boards offer corrosion and rust resistance for various weather conditions.

This manual provides detailed instructions for installation, usage, maintenance, and troubleshooting for your Tyger Access Running Boards.

Image 1.1: The Tyger Auto Tyger Access Running Boards, featuring a textured black finish and integrated drop steps.

2. Fitment Information

These running boards are specifically designed for:

• 차량: 2024-2026 도요타 타코마
• 택시 유형: Double Cab (4 full-size doors)
• 호환성: Includes Hybrid models

Important: These running boards are NOT compatible with Access Cab (2 full-size front doors & 2 suicided rear doors) or Regular Cab (2 doors only) models.

Image 2.1: Visual guide to confirm your truck's cab type. Ensure your vehicle is a Double Cab with four full-size doors for proper fitment.

3. 설정 및 설치

3.1. 포함된 구성 요소

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• 운전석 측 발판
• 승객석 발판
• All necessary hardware and mounting brackets
• 설치 가이드(본 문서)

3.2. 설치 단계

Installation is a direct bolt-on process and typically takes approximately 20 minutes. It is recommended to have assistance for easier handling and positioning of the running boards.

1. 차량 준비: 평평한 표면에 차량을 주차하고 주차 브레이크를 체결하십시오.
2. 장착 지점 식별: Locate the factory mounting points on the rocker panel beneath the vehicle's doors.
3. 브래킷 부착: Secure the provided mounting brackets to the vehicle's frame using the supplied hardware. Do not fully tighten at this stage.
4. 러닝보드 위치: Carefully lift and align the running board with the attached brackets.
5. 안전한 러닝 보드: Attach the running board to the brackets using the remaining hardware.
6. 조정 및 조임: Adjust the running board for desired positioning and ensure it is level. Once satisfied, fully tighten all bolts and nuts securely.
7. 반대쪽에도 반복하세요: 차량 반대쪽에도 동일한 절차를 따르십시오.

Image 3.1: Tyger Access Running Board installed on a vehicle, demonstrating its appearance and integration.

4. 사용 설명서

The Tyger Access Running Boards are designed for straightforward use. To operate:

• Ensure the running boards are securely installed before use.
• When entering or exiting the vehicle, place your foot firmly on the anti-slip step surface.
• The anti-slip step design provides enhanced traction for safe entry and exit in various conditions.

Image 4.1: Detail of the 4-inch wide anti-slip step, designed for secure footing.

5. 유지관리

To ensure the longevity and appearance of your Tyger Access Running Boards, follow these maintenance guidelines:

• 정기 청소: Clean the running boards periodically with mild soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
• 점검: Regularly inspect all mounting hardware for tightness. Re-tighten any loose bolts or nuts to maintain structural integrity.
• 마무리 보호: The textured black finish is designed for excellent corrosion and rust resistance. However, promptly address any deep scratches or chips to prevent potential rust formation.

Image 5.1: Illustration of the superior rust resistance provided by Tyger's signature textured black finish, including pre-treatment and E-coating.

6. 문제 해결

차량 발판에 문제가 발생하면 다음 사항을 고려하십시오.

• Loose Feeling: If the running boards feel loose or unstable, re-check all mounting bolts and nuts. Ensure they are tightened to the manufacturer's specifications.
• 특이한 소음: Inspect for any contact points between the running board and the vehicle's undercarriage. Adjust positioning or re-tighten hardware as needed.
• 설치 난이도: Refer back to the installation steps and diagrams. Ensure correct orientation of brackets and running boards. Verify vehicle fitment (Double Cab).

이러한 단계를 거쳐도 문제가 해결되지 않는 경우 고객 지원팀에 문의하세요.

7. 사양

Image 7.1: Detailed dimensions of the Tyger Access Running Board.

Image 7.2: Key features of the running boards, including E-coating, pre-drilled holes, Tyger end caps, and 500 lb weight capacity.

8. 보증 정보

Tyger Auto provides a 5년 보증 for US customers against manufacturing defects for this product. Please retain your proof of purchase for warranty claims.

9. 지원

For further assistance, technical support, or warranty inquiries, please visit the official Tyger Auto web사이트를 방문하거나 제품을 구매한 소매업체를 통해 고객 서비스 부서에 문의하세요.

자세한 정보와 연락처는 다음에서 확인할 수 있습니다. Tyger Auto Store on Amazon.