CREWORKS 25cm 350W Electric Pottery Wheel User Manual

1. 서론

Thank you for choosing the CREWORKS 25cm 350W Electric Pottery Wheel. This manual provides essential information for the safe and efficient operation of your new pottery wheel. Please read all instructions carefully before use and retain this manual for future reference.

This electric pottery wheel features a 25 cm reversible turntable and a powerful 350W motor, suitable for various pottery projects and skill levels. Its design emphasizes durability, safety, and ease of use, making it an ideal tool for both beginners and experienced potters.

2. 중요 안전 지침

화재, 감전 또는 부상의 위험을 줄이려면 항상 다음 기본 안전 예방 조치를 따르세요.

• 모든 지침을 읽으십시오. Familiarize yourself with the controls and proper use of the pottery wheel.
• 전기 안전: 전원 공급 장치가 볼륨과 일치하는지 확인하십시오.tage requirements of the machine. Do not operate with wet hands or in wet conditions. Always plug into a grounded outlet.
• Integrated Circuit Breaker (RCD): The machine is equipped with an RCD for enhanced safety. Test the RCD before each use by pressing the "TEST" button. The RCD should trip. Reset it by pressing "RESET" or flipping the switch to "OPEN". If it does not trip, do not use the machine and contact support.
• 감독: Close supervision is necessary when the pottery wheel is used by or near children or individuals with reduced physical, sensory, or mental capabilities.
• 작업 공간 지우기: Keep your workspace clean, well-lit, and free from clutter.
• 개인 안전: Wear appropriate clothing; avoid loose clothing, jewelry, or long hair that could get caught in moving parts.
• 유지: 청소 또는 유지 보수를 하기 전에 전원 코드를 뽑으십시오.
• 용도: Use the pottery wheel only for its intended purpose of shaping clay.

3. 패키지 내용

포장을 풀 때 모든 품목이 들어 있고 손상되지 않았는지 확인하세요.

• CREWORKS Electric Pottery Wheel (Main Unit)
• Removable ABS Splash Basin
• 풋 페달
• 8-Piece Clay Sculpting Tool Set
• 사용자 설명서

그림 3.1: Pottery wheel and included accessories.

4. 제품 오버view

Familiarize yourself with the main components of your pottery wheel:

그림 4.1: Main components of the pottery wheel.

• Turntable (Wheel Head): 25 cm aluminum alloy wheel for shaping clay.
• Splash Basin: Removable ABS basin to contain water and clay splatter.
• 전원 스위치: 기계를 켜거나 끕니다.
• Directional Adjustment Knob (FOR/REV): Selects clockwise (FOR) or counter-clockwise (REV) rotation.
• 발 페달: Controls the speed of the turntable.
• RCD (Residual Current Device): Integrated safety device with TEST and RESET buttons.
• 전원 표시 등: 전원 상태를 표시하십시오.

그림 4.2: Directional Switch.

그림 4.3: RCD (Circuit Breaker).

그림 4.4: Foot Pedal for Speed Control.

그림 4.5: Aluminum Alloy Turntable.

5. 설정

1. 짐 풀기: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 운송 중 손상이 있는지 확인하세요.
2. 놓기: Place the pottery wheel on a stable, level surface. Ensure there is adequate space around the machine for comfortable operation and to prevent clay splatter from affecting other items.
3. Attach Splash Basin: Position the removable ABS splash basin around the turntable. Ensure it is securely seated to prevent leaks.
4. 풋 페달 연결: Plug the foot pedal cable into the designated port on the side of the pottery wheel.
5. 전원 연결: 전원 코드를 접지된 콘센트에 꽂으세요.
6. RCD 테스트: Before first use and each subsequent use, perform the RCD test as described in the Safety Instructions (Section 2).

그림 5.1: Pottery wheel dimensions and typical usage environments.

6. 사용 설명서

1. 전원 켜기: Flip the main power switch to the "ON" position. The power indicator light should illuminate.
2. 회전 방향 선택: Use the directional adjustment knob (FOR/REV) to select your desired rotation. "FOR" is clockwise, and "REV" is counter-clockwise. This allows for comfortable use by both right-handed and left-handed individuals.
3. Place Clay: Center a lump of prepared clay firmly on the turntable.
4. 제어 속도: Gently press the foot pedal to start the turntable rotation. Increase pressure on the pedal to increase the speed (up to 300 RPM). Release pressure to slow down or stop the wheel. This hands-free control allows you to use both hands for shaping the clay.
5. 형성: Begin shaping your clay using appropriate techniques and tools. Maintain a consistent speed for best results.
6. 전원 끄기 : Once finished, release the foot pedal, turn the main power switch to "OFF", and unplug the machine from the power outlet.

그림 6.1: Hands-free speed control using the foot pedal.

그림 6.2: Shaping clay on the pottery wheel.

7. 유지관리

Regular cleaning and maintenance will ensure the longevity and optimal performance of your pottery wheel.

• 전원 분리: Always unplug the pottery wheel from the power outlet before cleaning or performing any maintenance.
• Clean Splash Basin: Remove the ABS splash basin and thoroughly clean it after each use to prevent clay buildup. Rinse with water and wipe dry.
• 깨끗한 턴테이블: Wipe down the aluminum turntable with a damp cloth to remove any clay residue. Avoid using abrasive cleaners that could scratch the surface.
• Clean Machine Body: Wipe the main body of the machine with a damp 천으로 감싸십시오. 전기 부품에 물이 들어가지 않도록 하십시오.
• 저장: Store the pottery wheel in a dry, dust-free environment when not in use.
• 물 침수를 피하십시오: Never immerse the main unit of the pottery wheel in water.

8. 문제 해결

문제가 발생하면 다음 문제 해결 가이드를 참조하세요.

For problems not listed above, or if solutions do not resolve the issue, please contact CREWORKS customer support.

9. 사양

10. 보증 및 지원

CREWORKS products are designed for durability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact CREWORKS customer service directly. Please have your model number (LPJ-NLJ1-EU) and purchase date available when contacting support.