KEIKI Twin Over Twin Metal Bunk Bed with Trundle - Instruction Manual

1. 안전 정보

경고: 이러한 경고 및 지침을 따르지 않으면 심각한 부상이나 사망을 초래할 수 있습니다.

• Always ensure that the weight on the top bunk does not exceed 250파운드. The bottom bunk and trundle each have a weight capacity of 350파운드.
• Use the side ladders carefully. Supervise children when they are using the bed.
• 위층 침대에는 한 번에 한 명만 올라가도록 하십시오.
• Regularly check and tighten all bolts and screws to ensure stability. Loose connections can lead to instability and potential hazards.
• Keep the area around the bed clear of obstacles to prevent tripping or falling.
• 위층 침대는 6세 미만 어린이에게는 적합하지 않습니다.
• Ensure mattresses used on both bunks and the trundle are of the correct size and thickness to prevent gaps where a child could become entrapped. The maximum mattress thickness for the top bunk should not exceed 6 inches.
• Always use the guardrails provided on the top bunk. Do not remove them.
• 침대 위나 아래에서 장난치는 것을 금지합니다.
• Use only the provided ladder for entering and exiting the top bunk.

2. 제품 오버view

The KEIKI Twin Over Twin Metal Bunk Bed with Trundle is designed for space-saving and versatility. This bed features a sturdy metal frame, two integrated side ladders, full-length guardrails for safety, and a convenient pull-out trundle bed for additional sleeping space. The design allows for the bunk bed to be separated into two individual twin beds if desired. No box spring is required as the bed includes metal slats for mattress support.

Figure 2.1: Fully assembled KEIKI Twin Over Twin Metal Bunk Bed with Trundle.

Figure 2.2: Product dimensions for the KEIKI Twin Over Twin Metal Bunk Bed with Trundle.

3. 설치 및 조립

This bunk bed is designed for straightforward assembly. All necessary parts and tools are included in the packaging. Please follow the step-by-step instructions provided in the separate assembly manual that accompanies your product.

3.1 시작하기 전에

• Unpack all components and verify that all parts listed in the assembly manual are present.
• 긁힘을 방지하려면 모든 부품을 부드럽고 깨끗한 표면에 놓으세요.
• 조립을 위한 충분한 공간이 있는지 확인하세요.

3.2 조립 단계

1. Follow the numerical sequence of steps in the provided assembly manual.
2. Securely fasten all bolts and screws. Do not overtighten until instructed, but ensure all connections are firm.
3. Attach the guardrails and ladders as specified in the instructions.
4. Once assembled, double-check all connections for tightness and stability before use.

4. 사용 설명서

4.1 이층 침대 사용하기

• Place twin-size mattresses directly onto the metal slat foundations. No box spring is required.
• Ensure the top bunk mattress does not exceed the recommended thickness to maintain guardrail effectiveness.
• Always use the integrated side ladders for accessing the top bunk.

4.2 트런들 침대 사용하기

The trundle bed provides an additional sleeping surface that can be easily stored when not in use.

• To deploy the trundle, gently pull the trundle frame out from under the bottom bunk. It is equipped with wheels for smooth movement.
• To store the trundle, push it back under the bottom bunk until it is fully recessed.

Figure 4.1: Trundle bed extended from under the bottom bunk.

4.3 Detachable Feature

This bunk bed can be separated into two independent twin beds. Refer to your assembly manual for specific instructions on how to safely detach and reconfigure the beds. This process typically involves disassembling the connecting components and reattaching the necessary parts to form two standalone frames.

Figure 4.2: The bunk bed reconfigured as two separate twin beds.

5. 유지관리

5.1 청소

• 금속 프레임을 부드러운 천으로 닦으세요.amp 옷감.
• 강한 화학 물질, 연마성 세척제 또는 광택제는 마감재를 손상시킬 수 있으므로 사용을 피하십시오.
• 녹을 방지하려면 세척 후 완전히 건조시키세요.

5.2 정기 점검

• Periodically inspect all bolts, screws, and connections to ensure they remain tight. Tighten any loose fasteners immediately.
• Check for any signs of wear or damage to the frame, slats, guardrails, or ladders. Discontinue use if any significant damage is found and contact customer support.

6. 문제 해결

6.1 삐걱거리는 소리

• 원인: 느슨한 볼트나 연결부.
• 해결책: Systematically check and tighten all bolts and screws on the bed frame. Ensure all parts are properly aligned.

6.2 불안정성 또는 흔들림

• 원인: Uneven assembly or loose fasteners.
• 해결책: Verify that the bed is assembled on a flat, level surface. Re-check all connections and tighten them securely. Ensure all components are correctly installed according to the assembly manual.

6.3 Trundle Not Sliding Smoothly

• 원인: Obstruction, damaged wheels, or uneven floor.
• 해결책: Check for any objects obstructing the trundle's path. Inspect the trundle wheels for damage or debris. Ensure the floor surface is clear and level.

7. 사양

8. 보증 정보

Specific warranty details for the KEIKI Twin Over Twin Metal Bunk Bed are not provided in this manual. For information regarding product warranty, including coverage and duration, please refer to the documentation included with your purchase or contact KEIKI customer support directly.

9. 고객 지원

If you have any questions about the assembly, operation, maintenance, or troubleshooting of your KEIKI Twin Over Twin Metal Bunk Bed, please do not hesitate to contact KEIKI customer support. Please have your model number (LH00012) and purchase information ready when you call or email.

For the most current contact information, please visit the official KEIKI web사이트를 참조하거나 구매 영수증을 참조하세요.