1. 서론
Thank you for choosing the CREWORKS 2L Ultrasonic Cleaner. This device is designed to provide efficient and thorough cleaning for a wide range of items, including jewelry, glasses, watches, and various small parts. Utilizing ultrasonic waves, it offers a superior cleaning experience compared to traditional methods, reaching intricate surfaces and tight corners. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new ultrasonic cleaner.
Image: The CREWORKS 2L Ultrasonic Cleaner, highlighting its ability to eliminate cleaning difficulties for various items.
2. 안전 지침
기기를 작동하기 전에 모든 안전 지침을 주의 깊게 읽어보세요.
- 분해하지 마십시오 the unit. Unauthorized disassembly may lead to electric shock or damage to the device.
- 무인으로 사용하지 마십시오. 청소 작업자가 작업하는 동안에는 항상 감독하십시오.
- 있는지 확인 충분한 유체 in the tank before operation. Operating without adequate fluid can damage the ultrasonic transducer.
- Unplug the unit before filling or draining the tank to prevent electrical hazards.
- Keep the unit away from water sources and do not immerse the main body in water.
- 젖은 손으로 전원 플러그를 만지지 마세요.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- Use only appropriate cleaning solutions. Do not use flammable, corrosive, or abrasive liquids.
- Ensure proper ventilation during use, especially if using specialized cleaning solutions.
Image: The ultrasonic cleaner showing the warning label on the lid, emphasizing critical safety precautions.
3. 제품 오버view
The CREWORKS 2L Ultrasonic Cleaner features a durable stainless steel tank and an intuitive control panel. Familiarize yourself with the components:
- 스테인레스 스틸 탱크: The main reservoir for cleaning solution and items.
- 제어판: Features knobs for temperature and time settings, and toggle switches for cleaning modes.
- 온도 조절 손잡이: Adjusts heating temperature from 70°F to 210°F.
- 시간 조절 손잡이: Sets cleaning duration from 1 to 30 minutes.
- 모드 스위치: Select between 'Semi-Wave' (Gentle) and 'Full Wave' (Standard) ultrasonic cleaning, and 'Degas' function.
- 디지털 디스플레이: Shows current temperature or remaining time.
- 핸들: 편리한 이동을 위한 손잡이가 통합되어 있습니다.
- 뚜껑: Helps contain splashes and reduce noise during operation.
- 청소 바구니: A removable basket for holding items during cleaning, preventing them from resting directly on the tank bottom.
Image: The ultrasonic cleaner positioned on a kitchen counter, highlighting its user-friendly control knobs for time and temperature.
4. 설정
- 풀다: 초음파 세척기와 모든 부속품을 포장에서 조심스럽게 꺼내십시오.
- 놓기: Place the unit on a stable, flat, and dry surface, ensuring adequate ventilation around the machine.
- 채우기 탱크: Ensure the unit is unplugged. Fill the stainless steel tank with an appropriate cleaning solution. Do not exceed the maximum fill line. The fluid level should be sufficient to cover the items to be cleaned.
- 장바구니에 담기: 청소 바구니를 탱크에 넣으세요.
- 전원 연결: 전원 코드를 접지된 콘센트에 꽂으세요.
5. 사용 설명서
초음파 세척기를 작동하려면 다음 단계를 따르십시오.
- 준비할 항목: 세척할 물건들을 세척 바구니에 넣으세요. 물건들이 너무 빽빽하게 들어가지 않도록 하고, 세척액에 완전히 잠기도록 하세요.
- 뚜껑 닫기: Securely close the lid of the ultrasonic cleaner.
- 설정 온도(선택 사항): Turn the Temperature Control Knob to your desired temperature (70-210°F). The built-in heater will begin warming the solution. Heating speeds up the cleaning process for certain contaminants.
- 모드 선택:
- 탈기 모드: Toggle the 'Degas' switch to ON. This mode quickly removes dissolved gases from the cleaning solution, enhancing cavitation efficiency and preventing oxidation of cleaned objects. Run for 1-2 minutes before cleaning, especially with fresh solution.
- Gentle Mode (Semi-Wave): For delicate items like circuit boards, certain jewelry, or fragile surfaces, toggle the 'Semi-Wave' switch to ON. This halves the ultrasonic power, providing a gentler cleaning action.
- Standard Mode (Full Wave): For general cleaning and stubborn grime, ensure the 'Full Wave' switch is ON (and 'Semi-Wave' is OFF). This utilizes the full ultrasonic power.
Image: Visual explanation of the Degassing Mode, which removes gases for better cavitation, and the Gentle Mode, which reduces cleaning intensity for delicate items.
- 시간 설정: Turn the Time Control Knob to your desired cleaning duration (1-30 minutes). The digital display will show the countdown.
- 청소 시작: The unit will automatically start the cleaning process once the time is set. Ultrasonic waves will generate cavitation bubbles that dislodge dirt and grime.
- 마치다: Once the timer reaches zero, the cleaning cycle will stop. Unplug the unit before removing items.
- 헹굴 품목: Carefully remove the basket and rinse the cleaned items under clean water to remove any remaining solution or loosened debris. Dry thoroughly.
Image: Demonstrates the visible cleaning effect with before-and-after comparisons of eyeglasses, a razor, and a circuit board.
6. 유지관리
적절한 유지 관리는 초음파 세척기의 수명과 최적의 성능을 보장합니다.
- 배수: After each use, especially if the solution is dirty, unplug the unit and carefully drain the cleaning solution.
- 탱크 청소: Wipe the inside of the stainless steel tank with a soft cloth. For stubborn residue, use a mild, non-abrasive cleaner. Rinse thoroughly with clean water and dry completely.
- 외부 청소: 광고로 장치의 외부를 닦습니다.amp 천으로 닦으세요. 강한 화학 물질을 사용하거나 기기를 물에 담그지 마세요.
- 저장: Store the cleaner in a cool, dry place away from direct sunlight and moisture when not in use. Ensure the tank is empty and dry.
- 정기 검사: 전원 코드에 손상 흔적이 있는지 주기적으로 점검하십시오. 손상된 경우 사용을 중단하고 고객 지원 센터에 문의하십시오.
7. 문제 해결
If you encounter issues with your CREWORKS Ultrasonic Cleaner, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기기가 켜지지 않습니다. | 전원 공급 안 됨; 전원 코드가 제대로 연결되지 않음; 제품 고장. | Check power outlet and cord connection. Ensure the power switch is ON. If problem persists, contact customer support. |
| Cleaning effect is poor. | Insufficient cleaning solution; Incorrect cleaning solution; Overcrowded items; Degas mode not used; Too short cleaning time. | Ensure items are fully submerged. Use appropriate solution for items. Do not overcrowd. Use Degas mode for new solutions. Increase cleaning time. |
| 작동 중 비정상적인 소음이 발생합니다. | Unit not on a stable surface; Tank empty or insufficient fluid; Foreign object in tank. | Place on a stable surface. Ensure sufficient fluid. Check for and remove any foreign objects. |
| 난방 기능이 작동하지 않습니다. | Temperature knob not set; Heater malfunction. | Ensure temperature knob is set to a desired temperature. If problem persists, contact customer support. |
If the issue persists after trying these solutions, please contact CREWORKS customer support for further assistance.
8. 사양
| 특징 | 사양 |
|---|---|
| 모델 | B0CZNX678Q |
| 상표 | 크레웍스 |
| 탱크 용량 | 2리터(0.5갤런) |
| 초음파 파워 | 60와트 |
| 가열 전력 | 100와트 |
| 초음파 주파수 | 40kHz |
| 타이머 범위 | 1-30분 |
| 온도 범위 | 70-210°F(20-99°C) |
| 탱크 소재 | 304 스테인리스 스틸 |
| 전체 치수 | 6.9 x 6.5 x 8.1인치(대략) |
| 탱크 치수 | 5.9 x 5.3 x 3.9인치(대략) |
| 무게 | 5.4파운드(대략) |
Image: Detailed specifications including the dimensions of the ultrasonic cleaner unit, its internal tank, and the cleaning basket.
9. 보증 및 지원
CREWORKS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official CREWORKS website. You may also contact customer service via the contact information provided on your purchase receipt or the product packaging.
제조업체: 크레웍스
첫 이용 가능 날짜: 6년 2024월 XNUMX일