User Manual: Dapper Supply Battery Powered Walk Behind Mini Automatic Floor Scrubber Machine

1. 서론

Welcome to the Dapper Supply family! This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new Battery Powered Walk Behind Mini Automatic Floor Scrubber Machine. Please read this manual thoroughly before operating the machine to ensure optimal performance and longevity.

2. 안전 정보

본인과 타인의 안전이 최우선입니다. 다음 안전 수칙을 항상 준수하십시오.

• 기기를 사용하기 전에 모든 지침을 읽으세요.
• Do not operate the machine with wet hands or in wet conditions unless specifically designed for it.
• 작동 중에는 어린이와 애완동물을 기계 가까이에 두지 마십시오.
• Use only Dapper Supply approved accessories and replacement parts.
• Ensure the machine is unplugged before performing any maintenance or cleaning.
• This machine is designed for tile, vinyl, hardwood, laminate, concrete, and other sealed hard floors. It is not intended for use on carpets or rugs.
• Do not use flammable or combustible liquids with the machine.
• 사용하지 않을 때는 기계를 건조하고 안전한 곳에 보관하세요.

3. 제품 오버view

3.1개의 구성요소

The Dapper Supply Mini Automatic Floor Scrubber comes with the following components:

• Main Scrubber Unit
• 조절 가능한 핸들
• Solution Tank (1.2-gallon capacity)
• Recovery Tank (1.5-gallon capacity)
• 충전기 및 전원 코드
• Set of White Scouring Pads (included)
• Scrubbing Brushes (optional/additional purchase)
• Polishing Pads (optional/additional purchase)

3.2 주요 특징

• Compact & Efficient Cleaning: 15-inch cleaning width and 170 RPM brush speed.
• 높은 생산성: Covers up to 12,900 ft² per hour.
• 오래 지속되는 성능: Powerful 24V system with up to 90 minutes runtime and 100-minute charge time.
• 듀얼 탱크: 1.2-gallon solution tank and 1.5-gallon recovery tank for efficient water management.
• 조용한 작동: Operates at just 65 dB, suitable for daytime cleaning.
• 탁월한 건조 성능: 17-inch squeegee and 70W suction motor ensure quick water recovery.
• Lightweight & Easy to Maneuver: Weighs 22 lbs, easy to transport and operate in tight spaces.
• Versatile Floor Compatibility: Designed for tile, vinyl, hardwood, laminate, concrete, and other sealed hard floors.

4. 설정

4.1 풀기

포장에서 모든 구성품을 조심스럽게 꺼내십시오. 운송 중 파손 여부를 확인하십시오. 추후 보관 또는 운송을 위해 포장재를 보관하십시오.

4.2 조립

1. Attach the adjustable handle to the main scrubber unit, ensuring it clicks securely into place.
2. Open the brush/pad compartment on the underside of the machine.
3. Install the desired scrubbing brushes or polishing pads by aligning them with the mounting points and securing them. (Refer to Figure 3.7 for brushes and Figure 3.8 for pads).
4. Ensure the recovery tank is properly seated in its compartment. (Refer to Figure 3.3).

4.3 초기 충전

Before first use, fully charge the machine's battery. The powerful 24V system requires approximately 100 minutes for a full charge.

1. Locate the charging port on the machine.
2. Connect the charger to the machine and then plug the power cord into a standard electrical outlet.
3. 충전 표시등이 충전 상태를 보여줍니다. 완전히 충전되면 연결을 해제하십시오.

5. 사용 설명서

5.1 용액 탱크 채우기

1. 기계가 꺼져 있는지 확인하십시오.
2. Open the lid of the solution tank located on the top of the unit. (Refer to Figure 3.4).
3. Fill the tank with clean water and an appropriate, low-foaming floor cleaning solution. Do not overfill.
4. Securely close the solution tank lid.

5.2 기계 시동

1. 기계가 평평하고 안정된 표면에 있는지 확인하세요.
2. Press and hold the power button on the handle for approximately 3 seconds until the machine powers on.
3. 손잡이를 편안한 작업 높이로 조절하십시오.

5.3 세척 과정

The machine is designed for efficient cleaning of hard floor surfaces.

• Gently push the machine forward to begin scrubbing. The solution will be dispensed, and the brushes/pads will rotate to clean the floor.
• The 17-inch squeegee and 70W suction motor will recover the dirty water into the recovery tank, leaving floors dry and safe to walk on.
• Move the machine in overlapping passes to ensure complete coverage.
• The machine can cover up to 12,900 ft² per hour, making it ideal for small commercial spaces.

5.4 Emptying the Recovery Tank

It is crucial to empty the recovery tank after each use or when it reaches its maximum capacity (1.5 gallons).

1. 기계를 끄세요.
2. Remove the recovery tank from the main unit. (Refer to Figure 3.3 and Figure 3.5).
3. Carefully pour the dirty water into a suitable drain.
4. Rinse the recovery tank with clean water to prevent residue buildup.
5. Reinstall the clean recovery tank securely.

6. 유지관리

6.1 일일 유지 보수

• After each use, empty and rinse both the solution and recovery tanks thoroughly.
• Clean the squeegee blade to ensure effective water pickup. Inspect for wear and tear.
• 광고로 기계 외부를 닦아주세요amp 옷감.

6.2 Brush/Pad Replacement

Regularly inspect the scrubbing brushes or polishing pads for wear. Replace them when they show signs of reduced effectiveness.

1. Turn off the machine and tilt it back to access the underside.
2. Remove the worn brushes/pads by twisting or unlatching them. (Refer to Figure 3.7 and Figure 3.8).
3. Install new brushes/pads, ensuring they are securely fastened.

6.3 보관

When storing the machine for extended periods:

• Ensure both tanks are empty and clean.
• Store the machine in a dry, temperature-controlled environment.
• For optimal battery life, charge the battery fully before storage and recharge every 3-6 months if not in use.

7. 문제 해결

일반적인 문제와 해결 방법은 아래 표를 참조하세요.

8. 사양

Technical specifications for the Dapper Supply Mini Automatic Floor Scrubber:

9. 보증 및 지원

9.1 제품 보증

The Dapper Supply Mini Automatic Floor Scrubber is backed by a full 1-Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2 고객 지원

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Dapper Supply customer support:

• Web대지: Visit the Dapper Supply Store on Amazon
• 이메일: support@dappersupply.com (Examp(이메일)
• 핸드폰: 1-800-XXX-XXXX (구amp전화번호)