ECOELER YM2601-WH

ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

Your guide to installation, operation, and maintenance of your ECOELER Motion Sensor Dimmer Switch.

1. 서론

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

ECOELER PIR Motion Sensor Dimmer Switch with icons for advanced motion sensor, ambient light sensor, timer delay, fully dimmable, energy saving, and fire resistant features.

이미지: 이상view of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

2. 제품 특징

핸즈프리 제어: Automatically detects presence and ambient light to activate or deactivate lights.
Customization Settings: Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
보편적 인 호환성 : Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
간편한 설치: Fits standard junction boxes and requires a neutral wire.
내구성 있는 디자인: Constructed with tough thermoplastic housing for impact and scratch resistance.

Diagram showing the adjustable settings on the ECOELER Motion Sensor Dimmer Switch, including dimmer level, time delay, sensitivity, ambient light, OCC/VAC mode, darkest brightness, and ON/OFF button.

이미지: 상세 view of the product features and adjustable settings on the dimmer switch.

3. 안전 정보

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

이 장치는 National Electric Code 및 현지 규정에 따라 설치하도록 되어 있습니다.
자격을 갖춘 전기 기술자가 이 설치를 수행하는 것이 좋습니다.
구리선만 사용하세요.
정상적인 작동을 위해서는 중성선이 필요합니다.
This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. 패키지 내용

ECOELER Motion Sensor Dimmer Switch
월 플레이트
설치 지침(본 설명서)
장착 나사
배선 캡

Image showing the ECOELER Motion Sensor Dimmer Switch with its dimensions, included wall plate, screws, and wiring caps.

Image: Product dimensions and included accessories.

5. 사양

기인하다	값
모델 번호	YM2601-WH
운영 볼륨tage	120볼트(AC)
현재 평가	10 Amps
최대 와트tage (조광 가능 LED/CFL)	150와트
최대 와트tage (백열등/할로겐)	300와트
스위치 유형	Single-pole (1-way)
장착 유형	벽걸이형
재료	Copper, Metal, Polycarbonate
치수(길이 x 너비 x 높이)	6.86 x 4.2 x 11.48cm
인증	ETL, FCC

Image illustrating universal compatibility of the dimmer switch with incandescent, CFL, and dimmable LED lamps, showing their respective wattag전자 등급.

Image: Universal compatibility with various bulb types and their wattag전자 등급.

6. 설치

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 사전 설치

전원 끄기: Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltag전자 테스터.
이전 스위치 제거: Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
전선 식별: 배전반에서 다음 전선들을 확인하십시오:
- 핫(라인) 와이어: 회로 차단기에서 전력을 공급받습니다.
- 부하 와이어: 조명기구에 연결됩니다.
- 중성선: (Required) Typically white, often capped together with other neutral wires.
- 접지선: (Recommended) Typically bare copper or green.

6.2 배선 지침

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

연결하다 검은색 wire from the switch to the Hot (Line) 벽에서 전선을 떼어내세요.
연결하다 빨간색 wire from the switch to the 짐 벽에서 전선을 떼어내세요.
연결하다 하얀색 wire from the switch to the 중립적 벽에서 전선을 떼어내세요.
연결하다 녹색 wire from the switch to the 지면 벽에서 전선을 떼어내세요.

Wiring diagram for the ECOELER Motion Sensor Dimmer Switch, showing connections for Hot (Black), Load (Red), Neutral (White), and Ground (Green) wires in a single-pole circuit.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

6.3 조립 및 마감

Carefully push all wired connections into the electrical box.
Mount the switch into the electrical box using the provided screws.
벽판을 부착합니다.
회로 차단기에서 전원을 다시 켜세요.

Video: Real installation and finished look of the ECOELER Motion Sensor Dimmer Switch.

7. 사용 설명서

The ECOELER Motion Sensor Dimmer Switch offers flexible operation modes and customizable settings.

7.1 Sensor Modes (Occupancy vs. Vacancy)

The switch can be configured for two primary sensor modes:

점유 모드(자동 켜짐, 자동 꺼짐): The lights automatically turn ON when motion is detected and automatically turn OFF after a set time delay when no motion is detected.
공실 모드 (수동 켜짐, 자동 꺼짐): The lights must be manually turned ON, but will automatically turn OFF after a set time delay when no motion is detected.

Diagram illustrating the difference between Occupancy Mode (Auto ON, Auto OFF) and Vacancy Mode (Manual ON, Auto OFF) for the sensor switch.

Image: Comparison of Occupancy and Vacancy sensor modes.

Video: Explanation of motion sensor switch operating modes and ambient light level detection.

7.2 설정 조정

The switch features adjustable dials for Time Delay, Sensitivity, and Ambient Light Level. These are typically located under a removable cover on the switch face.

Diagram of the programmable sensor switch showing dials for Time, Sense (Sensitivity), and Light (Ambient Light Level), along with Menu and Select buttons for mode selection.

Image: Programmable sensor switch with adjustable dials for time, sensitivity, and light level.

시간 지연: Adjust how long the lights remain ON after the last detected motion. Options include 15 seconds (Test), 1 minute, 5 minutes, 15 minutes, and 30 minutes.
감광도: Adjust the motion detection range. Higher sensitivity detects motion over a larger area.
Ambient Light Level: In Occupancy mode, this setting determines the ambient light threshold below which the sensor will turn on the lights. For example, set to 'Dark' for lights to only turn on in low light conditions.

Image showing the adjustable time delay, sensitivity, and ambient light level settings on the motion sensor switch.

Image: Adjustable settings for time delay, sensitivity, and ambient light level.

7.3 밝기 조절 기능

Use the dimmer button (typically a rocker switch or slider) to manually adjust the brightness of the connected lights. The digital control ensures smooth, flicker-free dimming.

Image demonstrating the digital dimming feature of the switch, showing different light levels in a study, dining room, and children's room.

Image: Digital dimming in action, illustrating various brightness levels.

8. 문제 해결

조명이 켜지지 않음:
- 회로 차단기에서 전원이 켜져 있는지 확인하십시오.
- Verify all wiring connections are secure and correct (Hot, Load, Neutral, Ground).
- Check if the bulb is working and properly installed.
- Adjust the ambient light level setting; if set too high, lights may not turn on in bright conditions.
- Increase sensitivity if motion is not being detected.
Lights do not turn OFF:
- Ensure no continuous motion is occurring within the sensor's range.
- Check the time delay setting; a longer delay will keep lights on for longer.
- Reduce sensitivity if the sensor is detecting motion from outside the desired area.
Lights flicker or dim improperly:
- Ensure you are using dimmable LED/CFL or incandescent/halogen bulbs. Non-dimmable bulbs may flicker.
- 총 와트를 확인하세요tage of connected bulbs does not exceed the switch's maximum rating (150W for LED/CFL, 300W for Incandescent/Halogen).

9. 유지관리

To ensure optimal performance and longevity of your ECOELER Motion Sensor Dimmer Switch:

청소: Wipe the switch and wall plate with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
장애물을 피하십시오: Ensure the sensor lens is not obstructed by furniture, curtains, or other objects that could block motion detection.
정기 점검: Periodically check the switch for any loose connections or visible damage. If any issues are found, turn off power at the breaker and consult a qualified electrician.

10. 보증 및 지원

The ECOELER Motion Sensor Dimmer Switch comes with a 1년 보증, providing peace of mind regarding its quality and durability. For technical support, warranty claims, or any questions regarding your product, please contact ECOELER customer service.

제조업체: ECOELER ELECTRIC INC

연락하다: SUPPORTS@ECOELER.COM

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.