소개
The B22 Micro-Cut Document Shredder is designed for secure and efficient shredding in office environments. Featuring P-5 security level micro-cut technology, it ensures sensitive documents and credit cards are destroyed to high standards. This shredder is suitable for 1-5 users, offering continuous operation, anti-jamming technology, and quiet performance. Its compact design integrates well into any office space, providing a reliable tool for protecting sensitive information.
중요 안전 지침
Please read these instructions carefully before using the shredder. Failure to follow these instructions may result in injury or damage to the shredder.
- 손, 머리카락, 헐렁한 옷이 종이 투입구에 닿지 않도록 하십시오.
- 어린이와 애완동물을 분쇄기에 가까이 두지 마십시오.
- Do not insert more sheets than specified (9 sheets maximum).
- 금속 물체, 큰 종이 클립 또는 접착 라벨은 파쇄하지 마십시오.
- Unplug the shredder when not in use or before moving/cleaning.
- 전원 코드가 손상된 경우 파쇄기를 작동하지 마십시오.
- 쓰레기통이 막히는 것을 방지하기 위해 정기적으로 쓰레기통을 비우세요.
상자 안에 무엇이 들어있나요?
패키지를 열면 모든 구성품이 들어 있는지 확인하세요.
- HSM Securio B22 Micro-Cut Document Shredder Unit
- Integrated Waste Bin with a 8.7-gallon capacity
- 전원 코드
- 사용 설명서 (본 문서)
설정
포장 풀기 및 배치
Carefully remove the shredder from its packaging. Place the shredder on a flat, stable surface near a power outlet. Ensure there is adequate space around the unit for ventilation and easy access to the waste bin.
Image: The HSM Securio B22 Micro-Cut Document Shredder, showing its compact design and waste bin access.
Installing the Waste Bin
Ensure the integrated 8.7-gallon waste bin is correctly seated within the shredder unit. The shredder will not operate if the bin is not properly inserted.
전원 연결
Plug the power cord into the shredder's power inlet, then plug the other end into a standard electrical outlet (120 V / 60 Hz). The shredder is now ready for operation.
작동 지침
전원 켜기/끄기
Locate the power switch, typically on the top or back of the shredder. Set it to the "ON" position to activate the shredder. To turn off, set the switch to "OFF". For extended periods of non-use, unplug the shredder from the wall outlet.
문서 파쇄
Insert paper, staples, or paper clips into the paper entry slot. The shredder will automatically start shredding. Do not exceed the maximum sheet capacity of 9 sheets per pass to prevent jams. For credit cards, insert them one at a time into the designated slot (if separate) or the main paper entry slot.
연속작업
This shredder is designed for continuous operation, allowing for extended shredding sessions without overheating. However, it is always good practice to monitor the shredder's performance and empty the bin when full.
Anti-Jamming Technology
The shredder is equipped with anti-jamming technology. If a paper jam occurs, the shredder may automatically reverse to clear the jam. If it does not clear automatically, switch the shredder to reverse mode (if available) or turn it off, unplug it, and carefully remove the jammed paper.
조용한 작동
The B22 Micro-Cut Shredder operates quietly, minimizing disruption in office environments. This feature allows for comfortable use even during busy work hours.
유지
쓰레기통 비우기
Regularly check and empty the 8.7-gallon waste bin to prevent overfilling and potential paper jams. The shredder may stop operating when the bin is full.
청소
Unplug the shredder before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents. Periodically clean the paper entry area to remove any paper dust or debris.
Oiling the Shredder Blades (Recommended)
To maintain optimal performance and extend the life of your shredder, it is recommended to oil the cutting blades regularly, especially after emptying the waste bin or after heavy use. Use a shredder-specific oil. Apply a thin line of oil across the paper entry slot, then run a few sheets of paper through the shredder to distribute the oil.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 분쇄기가 작동하지 않습니다. | Not plugged in; power switch off; waste bin not properly inserted; overheating. | Ensure power cord is securely plugged in. Turn power switch to "ON". Re-insert waste bin correctly. Allow shredder to cool down for 30 minutes if it has been used continuously. |
| 종이 걸림. | Too many sheets inserted; paper not inserted straight; bin is full. | Reduce the number of sheets. Insert paper straight. Empty the waste bin. Use the reverse function to clear the jam. If necessary, unplug and carefully remove paper. |
| 분쇄기가 시끄럽습니다. | Blades need oiling; foreign object in blades. | Oil the shredder blades as per maintenance instructions. Unplug the shredder and carefully inspect the blades for any foreign objects. |
| 파쇄기가 작동 중에 멈춥니다. | Waste bin full; overheating; safety sensor triggered. | Empty the waste bin. Allow the shredder to cool down. Check if the bin is properly seated and if any safety sensors are obstructed. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 제품 치수 | 12.2 x 14.76 x 23.62 인치 |
| 품목 무게 | 35파운드 |
| ASIN | B0DT4MSDMF |
| 품목 모델 번호 | Securio B22 Micro-Cut |
| 첫 번째 이용 가능 날짜 | 15년 2025월 XNUMX일 |
| 제조업체 | HSM |
| 원산지 | 독일 |
| 컷 타입 | 마이크로 컷 |
| 상표 | 일반적인 |
| 용량 | 8.7 Gallons (Bin) |
| 특징 | 조용한 작동 |
| 표준 시트 용량 | 9장 |
| 보안 수준 | P-5 (DIN 66399: E-4 | F-2 | P-5 | T-5) |
| 파쇄 크기 | 1/16 x 5/8 인치 |
| Shreddable Materials | Paper, staples, paper clips, credit cards |
| 실행 시간 | 마디 없는 |
| 속도 | 17.7피트/분 |
| 목 폭 | 9.45인치 |
| 전력 소비 | 440 와트 |
| 권tag전자/주파수 | 120V / 60Hz |
보증 정보
This 1832 Model B22 Micro-Cut Document Shredder comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms, conditions, and duration. Keep your purchase receipt as proof of purchase for warranty claims.
고객 지원
For technical assistance, troubleshooting, or warranty inquiries, please contact the manufacturer's customer support. Refer to the contact information provided on the product packaging or the manufacturer's official website. When contacting support, please have your model number (Securio B22 Micro-Cut) and ASIN (B0DT4MSDMF) ready.
자세한 내용은 다음을 방문하세요. Amazon의 제품 페이지.
