포헤어 냉압착 착즙기 JC-3005 사용 설명서

소개

This manual provides essential instructions for the safe and efficient operation, maintenance, and care of your Fohere Cold Press Juicer, model JC-3005. Please read this manual thoroughly before first use and retain it for future reference.

Image: The Fohere Cold Press Juicer, model JC-3005, shown fully assembled with a variety of fresh fruits and vegetables surrounding it, illustrating its purpose for juicing.

안전 예방 조치

• 작동 전에 주서기가 제대로 조립되었는지 항상 확인하세요.
• Do not insert fingers or other objects into the feed chute while the juicer is operating. Use the provided food pusher.
• Unplug the appliance from the power outlet before cleaning, disassembling, or assembling parts.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 모터 베이스를 물이나 기타 액체에 담그지 마십시오.
• Avoid juicing hard seeds, pits, or frozen fruits, as these can damage the auger and motor.
• If the appliance jams, use the reverse function to clear the blockage before attempting to disassemble.

제품 구성 요소

Familiarize yourself with the parts of your Fohere Cold Press Juicer:

• 모터베이스
• 주스 그릇
• 오거(압착 나사)
• 스트레이너(필터)
• Lid with Feed Chute and Safety Sensor
• 음식 푸셔
• 주스컵(800ml)
• Pulp Container (1000ml)
• 청소용 브러시

설정 및 조립

처음 사용하기 전에 다음 단계를 따라 착즙기를 조립하십시오.

1. 모터 베이스를 안정적이고 평평한 표면에 놓으세요.
2. 착즙 용기를 모터 받침대에 맞춰 놓고 딸깍 소리가 나면서 제자리에 고정될 때까지 시계 방향으로 돌리세요.
3. Insert the strainer into the juicing bowl, ensuring it is seated correctly.
4. Place the auger into the center of the strainer, pushing down firmly.
5. Attach the lid to the top of the juicing bowl, aligning the arrows and rotating clockwise until it locks. The safety sensor must be engaged for the juicer to operate.
6. Position the juice cup under the juice spout and the pulp container under the pulp spout.

이미지: 클로즈업 view of the Fohere Juicer's wide feed chute, measuring 4.72 inches in diameter, with fruits being placed inside. This illustrates the ease of feeding whole fruits without extensive pre-cutting.

작동 지침

Before juicing, wash all fruits and vegetables. For best results, cut larger items into pieces that fit comfortably into the feed chute, though the 4.72-inch wide chute accommodates many whole fruits.

1. Ensure the juicer is correctly assembled and the juice cup and pulp container are in place.
2. 전원 코드를 접지된 콘센트에 꽂으세요.
3. Turn the juicer ON using the control switch.
4. Gradually feed fruits and vegetables into the feed chute. Use the food pusher only if necessary to guide ingredients. Do not force ingredients.
5. 착즙기에 재료를 완전히 넣기 전에 재료가 완전히 갈릴 때까지 기다리세요.
6. 착즙기가 막히면 다른 방법으로 바꾸세요. "Reverse" function for a few seconds to clear the blockage, then switch back to "에".
7. Once juicing is complete, turn the juicer OFF and unplug it from the outlet.
8. Remove the juice cup and pulp container.

Image: The Fohere Juicer in operation, showing the 800ml juice cup filled with fresh juice and the 1000ml pulp container collecting pulp. Both containers are clearly labeled with their capacities and sit on a stable base.

유지관리 및 청소

Regular cleaning ensures optimal performance and longevity of your juicer. Clean the appliance immediately after each use.

1. 전원 콘센트에서 주서기의 플러그를 뽑습니다.
2. Disassemble the juicer by rotating the lid counter-clockwise, then removing the auger, strainer, and juicing bowl.
3. Empty the juice cup and pulp container.
4. Rinse all removable parts (lid, food pusher, auger, strainer, juicing bowl, juice cup, pulp container) under running water.
5. Use the provided cleaning brush to thoroughly clean the strainer, especially the fine mesh, to remove any pulp residue. The dual-layer filter can be separated for easier cleaning.
6. Wash all removable parts with warm, soapy water. Rinse thoroughly.
7. 광고로 모터 베이스 닦기amp 옷감. 모터 베이스를 물에 담그지 마십시오.
8. 모든 부품을 완전히 자연 건조시킨 후 다시 조립하거나 보관하세요.

이미지: 자세한 view of the Fohere Juicer's internal components, highlighting the 7-stage auger and the dual-layer easy-clean strainer. The image shows how the strainer can be separated for thorough cleaning, contributing to efficient juice extraction.

Image: A person cleaning the Fohere Juicer's strainer under running water using the included cleaning brush. Various disassembled parts are shown on a kitchen counter, emphasizing the ease of cleaning and maintenance.

문제 해결

주서기에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.

• 주서기가 켜지지 않습니다:
  • 전원 코드가 제대로 작동하는 콘센트에 제대로 꽂혀 있는지 확인하세요.
  • Verify that all parts are correctly assembled and locked into place, especially the lid, to engage the safety sensor.
• Juicer stops during operation or jams:
  • Too much produce may have been fed at once. Turn the juicer OFF, then use the "Reverse" function for a few seconds to clear the blockage.
  • Hard ingredients (e.g., large seeds, frozen fruit) may be causing a jam. Disassemble and remove the obstruction. Avoid juicing such items.
• Low juice yield or excessive pulp in juice:
  • Ensure the strainer is clean and free of blockages. A clogged strainer can reduce efficiency.
  • Some softer fruits may naturally produce more pulp.
• 큰 소음이나 진동:
  • Check that all components are correctly assembled and securely locked.
  • 착즙기가 안정적이고 평평한 표면에 놓여 있는지 확인하십시오.

명세서

보증 및 지원

For warranty information or technical support, please refer to the warranty card included with your product or contact FOHERE customer service. You can also visit the official FOHERE store for more information:

FOHERE Official Store