Keychron K10 버전 2 기계식 키보드 사용 설명서

1. 서론

This manual provides instructions for the Keychron K10 Version 2 QMK Wireless Mechanical Gaming Keyboard. The K10 Version 2 is a full-size, hot-swappable mechanical keyboard designed for both Mac and Windows users, offering wireless Bluetooth and wired USB-C connectivity, RGB backlighting, and QMK firmware for extensive customization.

Figure 1.1: Keychron K10 Version 2 Mechanical Keyboard.

2. 설정

2.1 언박싱 및 패키지 구성품

Carefully remove the keyboard and all accessories from the packaging. The package should include the Keychron K10 Version 2 keyboard, a USB-C to USB-A cable, a keycap puller, a switch puller, and a user manual.

2.2 유선 연결

1. 제공된 케이블의 USB-C 단자를 키보드의 USB-C 포트에 연결하십시오.
2. 케이블의 USB-A 끝을 컴퓨터의 사용 가능한 USB 포트에 연결합니다.
3. Ensure the keyboard's mode switch (located on the back or side) is set to 'Cable' or 'Wired' mode.
4. 키보드는 운영 체제에서 자동으로 인식됩니다.

2.3 무선 블루투스 연결

1. Ensure the keyboard's mode switch is set to 'Bluetooth' or 'Wireless' mode.
2. To enter pairing mode, press and hold the 'Fn' + '1' (or 'Fn' + '2' or 'Fn' + '3') key combination for 4 seconds until the '1' (or '2' or '3') key backlight flashes rapidly. This indicates the keyboard is ready to pair.
3. 컴퓨터나 기기에서 Bluetooth 설정으로 이동하여 새 기기를 검색하세요.
4. Select 'Keychron K10 V2' from the list of available devices.
5. If prompted, enter the pairing code displayed on your screen using the keyboard and press 'Enter'.
6. The '1' (or '2' or '3') key backlight will stop flashing and remain solid, indicating successful pairing.
7. The keyboard supports connecting up to 3 devices. Use 'Fn' + '1', 'Fn' + '2', or 'Fn' + '3' to switch between paired devices.

Figure 2.1: Multi-device Bluetooth connectivity.

2.4 운영 체제 전환

The K10 Version 2 keyboard has a switch to select between Mac and Windows layouts. Locate the OS switch on the back or side of the keyboard and set it to your desired operating system. This ensures correct key mapping for function keys and modifier keys.

Figure 2.2: Mac and Windows layout indicators.

2.5 조절 식 다리

The keyboard features two levels of adjustable feet, allowing you to set the typing angle to 7.7° or 11° for ergonomic comfort. Adjust the feet to your preferred typing position.

Figure 2.3: Adjustable keyboard feet for ergonomic support.

3. 키보드 작동

3.1 Key Functions and Customization (QMK)

The Keychron K10 Version 2 supports QMK firmware, enabling extensive key remapping, macro creation, and custom shortcuts. You can customize each key using the Keychron Launcher web 애플리케이션.

• 기능 키: Use the 'Fn' key in combination with F1-F12 for multimedia controls and other system functions.
• QMK Customization: Access the Keychron Launcher web app (refer to Keychron's official website for the link) to remap keys, create macros, and configure layers.

그림 3.1: 키크론 런처 web app for QMK customization.

3.2 백라이트 제어(RGB)

The keyboard features RGB backlighting. Use the dedicated backlight key (usually located above the number pad or near the F-keys) to cycle through different lighting effects. Use 'Fn' + arrow keys or other designated key combinations to adjust brightness and color.

Figure 3.2: RGB Backlighting in operation.

3.3 핫스왑 가능 스위치

The K10 Version 2 is hot-swappable, allowing you to change mechanical switches without soldering. This feature supports most 3-pin and 5-pin MX mechanical switches.

1. 스위치 제거: 제공된 스위치 풀러를 사용하여 스위치의 위쪽과 아래쪽 클립을 조심스럽게 잡고 위쪽으로 똑바로 당기십시오.
2. 스위치 설치: 새 스위치의 핀을 PCB의 구멍에 맞추세요. 스위치가 제자리에 딸깍 소리가 날 때까지 부드럽게 눌러주세요. 핀이 구부러지지 않았는지 확인하세요.

그림 3.3: 핫스왑 가능 스위치 메커니즘.

4. 유지관리

4.1 키보드 청소

Regular cleaning helps maintain keyboard performance and appearance.

• 일반 청소: 부드럽고 털이 없는 천을 살짝 사용하세요.amp키캡과 케이스는 물이나 순한 세척액으로 닦아주세요. 과도한 습기는 피하십시오.
• 딥 클리닝 : For thorough cleaning, remove keycaps using the keycap puller. Use compressed air to remove dust and debris from between the switches. Clean individual keycaps with a mild soap solution, rinse, and dry completely before reattaching.

4.2 배터리 관리

The K10 Version 2 features a 4000mAh battery. To prolong battery life:

• 배터리를 자주 완전히 방전시키지 마세요.
• 장기간 사용하지 않을 경우 키보드를 서늘하고 건조한 곳에 보관하십시오.
• 제공된 USB-C 케이블을 표준 USB 전원에 연결하여 키보드를 충전하십시오.

5. 문제 해결

5.1 연결 문제

• 블루투스가 연결되지 않음: Ensure the keyboard is in Bluetooth mode and in pairing mode (Fn + 1/2/3 for 4 seconds). Check your device's Bluetooth settings. Try forgetting the device and re-pairing.
• 유선 연결이 작동하지 않습니다: Ensure the cable is securely connected to both the keyboard and the computer. Verify the keyboard is in wired mode. Try a different USB port or cable.

5.2 키가 응답하지 않음

• 단일 키: If a single key is not responding, carefully remove the keycap and then the switch using the switch puller. Inspect the switch pins for bends or damage. Reinsert the switch firmly, ensuring proper alignment.
• 여러 개의 키: Ensure the keyboard is properly connected (wired or wireless). Check the OS switch setting. If the issue persists, a firmware reset or update may be necessary.

5.3 백라이트 문제

• 백라이트 끄기: Press the backlight key to cycle through effects. Adjust brightness using 'Fn' + arrow keys. Ensure the battery has sufficient charge if in wireless mode.
• 조명이 일정하지 않음: This could indicate a software issue or a faulty LED. Try resetting the keyboard or updating firmware.

5.4 펌웨어 업데이트

Keychron periodically releases firmware updates to improve performance and add features. Visit the official Keychron website for the latest firmware and instructions on how to update your K10 Version 2 keyboard.

6. 사양

7. 보증 및 지원

7.1 보증 정보

Keychron products typically come with a limited manufacturer's warranty. The duration and terms of the warranty may vary by region and retailer. Please refer to the warranty card included with your product or visit the official Keychron web자세한 보증 정보는 사이트를 참조하십시오.

7.2 고객 지원

For technical assistance, troubleshooting, or general inquiries, please contact Keychron customer support through their official website. You can usually find contact information, FAQs, and support resources on the 'Support' or 'Contact Us' section of the Keychron web대지.

공식적인 Web대지: www.keychron.com