AIWA APX-1200BT Professional Turntable User Manual

소개

구매해주셔서 감사합니다asing the AIWA APX-1200BT Professional Turntable. This manual provides essential information for the proper setup, operation, and maintenance of your new turntable. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

The AIWA APX-1200BT is designed for high-fidelity audio reproduction from vinyl records, featuring modern connectivity options such as Bluetooth 5.1 and USB for PC recording. Its robust construction and precision components ensure a superior listening experience.

안전 정보

기기 손상이나 부상을 방지하기 위해 다음 안전 수칙을 준수해 주십시오.

• 본 제품을 비, 습기 또는 극한의 온도에 노출시키지 마십시오.
• 장치를 열원 근처나 직사광선에 노출시키지 마십시오.
• 장치 주변의 적절한 환기를 확인하십시오.
• c를 열지 마세요asing. 모든 서비스는 자격을 갖춘 담당자에게 의뢰하세요.
• 스타일러스를 조심해서 다루어 손상되지 않도록 하세요.
• Always disconnect the power cord before cleaning or moving the unit.

패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• AIWA APX-1200BT Turntable Unit
• 더스트 커버
• Hinges (for dust cover)
• 플래터
• 슬립매트
• 균형추
• 45RPM 어댑터
• AC 어댑터(전원 공급 장치)
• 오디오 케이블(RCA)
• 사용 설명서 (본 문서)

Image: The AIWA APX-1200BT turntable with its dust cover open, showcasing the platter, tonearm, and controls.

설정

1. 풀기 및 배치

• 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
• Place the turntable on a stable, level surface away from vibrations, direct sunlight, and heat sources.

2. 플래터 및 벨트 설치

1. Place the aluminum platter onto the spindle.
2. Locate the drive belt (usually pre-installed on the underside of the platter or included separately).
3. Carefully stretch the belt around the motor pulley.
4. 접시 위에 매트를 올려놓으세요.

Image: A hand is shown carefully placing a component onto the turntable's aluminum platter, illustrating part of the assembly process.

3. Dust Cover and Hinges

• Attach the hinges to the rear of the turntable chassis.
• 먼지 커버를 힌지에 끼웁니다.

4. 톤암 및 카트리지 설치

1. Remove the stylus protector from the Audio-Technica AT-3600L cartridge.
2. 토너암 뒤쪽에 균형추를 부착합니다.
3. 톤암이 균형을 이루고 수평으로 떠 있을 때까지 카운터웨이트를 조정하십시오.
4. Rotate the counterweight to set the recommended tracking force (refer to cartridge specifications, typically 2.5-3.5 grams for AT-3600L).
5. Set the anti-skate dial to a value corresponding to the tracking force.

이미지: 자세한 view of the turntable's S-shaped tonearm, cartridge, and various control knobs, highlighting the precision components.

5. 오디오 연결

• Connect the RCA audio cable from the turntable's output to your amp전원 공급기 또는 전원 스피커.
• 만약 당신의 amplifier has a dedicated PHONO input, set the turntable's PHONO/LINE switch to 포노.
• 만약 당신의 amplifier has a LINE/AUX input, set the turntable's PHONO/LINE switch to 선 (utilizing the integrated preamp리퍼).
• Connect the ground wire (if present) from the turntable to your amp앰프의 접지 단자를 사용하여 험 노이즈를 줄입니다.

Image: The rear panel of the AIWA APX-1200BT turntable, displaying the various audio output and power connection ports.

Image: An icon indicating the 'PRE AMP PHONO' feature, highlighting the integrated preamp리퍼.

6. 전원 연결

• Connect the AC adapter to the turntable's power input and then to a wall outlet.

작동 지침

1. 레코드 재생

1. Place a record on the platter, ensuring it is centered. For 7-inch singles, use the included 45 RPM adapter.
2. Select the appropriate speed (33 or 45 RPM) using the speed selector button. The stroboscopic indicator lights will help confirm the correct speed.
3. 턴테이블 회전을 시작하려면 시작/정지 버튼을 누르십시오.
4. Gently lift the tonearm using the cueing lever and position the stylus over the desired track.
5. Lower the cueing lever to slowly drop the stylus onto the record.
6. At the end of the record, lift the tonearm using the cueing lever and return it to the tonearm rest. Press START/STOP to halt platter rotation.

2. Adjusting Pitch

• Use the pitch control slider to fine-tune the playback speed. The stroboscopic dots on the platter edge will appear stationary when the speed is accurate.

3. 블루투스 페어링

• 블루투스 스피커 또는 헤드폰이 페어링 모드인지 확인하십시오.
• Press and hold the Bluetooth pairing button on the turntable (refer to the control panel diagram in the product overview for exact location). The Bluetooth indicator light will flash.
• Once connected, the indicator light will remain solid. Audio will now stream wirelessly to your paired device.

Image: The Bluetooth logo, indicating the wireless connectivity feature of the turntable.

4. USB Recording to PC

• Connect the turntable to your computer using a USB cable (not included).
• Install audio recording software on your PC (e.g., Audacity, available online).
• Select the turntable as the input device in your recording software settings.
• Start playback on the turntable and begin recording in your software.
• 디지털화된 오디오를 저장하세요 file원하는 형식으로 되어 있습니다.

유지

1. 스타일러스 청소

• Always clean the stylus from back to front using a soft brush or specialized stylus cleaning fluid.
• 손가락으로 스타일러스를 만지지 마세요.

2. 턴테이블 청소

• Wipe the dust cover and chassis with a soft, dry cloth. For stubborn marks, use a slightly damp 천으로 닦아내고 즉시 말리세요.
• 독한 화학 물질이나 연마성 세제를 사용하지 마십시오.

3. 스타일러스 교체

• The stylus (needle) is a consumable part and should be replaced after approximately 300-500 hours of playback, or if sound quality degrades.
• Refer to the cartridge manufacturer's instructions for specific replacement procedures (Audio-Technica AT-3600L).

문제 해결

명세서

보증 및 지원

보증 정보

The AIWA APX-1200BT Turntable comes with a 2년 제조업체 보증 from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear of consumable parts like the stylus.

보증 청구를 위해 구매 증명서를 보관하십시오.

고객 지원

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact your retailer or the official Aiwa customer support. Contact details can typically be found on the Aiwa web사이트 또는 구매 문서.

When contacting support, please have your product model number (APX-1200BT) and proof of purchase readily available.