Yoolax Motorized Blackout Smart Blinds

소개

This manual provides detailed instructions for the installation, operation, and maintenance of your Yoolax Motorized Blackout Smart Blinds. Please read this guide thoroughly before installation and use to ensure proper function and longevity of your product.

상자 안에 무엇이 들어있나요?

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• Blackout smart blinds
• 모터
• 원격 제어
• 설치용 액세서리
• Standard charging cable
• 설명서

그림 1: 포함된 구성 요소

설정

1. 창문 크기 측정하기

Accurate measurements are crucial for proper fit and function. Determine whether you will use an Inside Mount or Outside Mount.

Inside Mount Measurement Guide

For an inside mount, the window frame must be at least 2.4 inches deep. Measure the width at the top, middle, and bottom of the window opening, and use the smallest measurement. The shade width should be 0 to 0.1 inches narrower than this minimum window width. Measure the height at the left, middle, and right, and use the smallest measurement. Note that motorized shades will have small light gaps on both sides with an inside mount.

Figure 2: Inside Mount Measurement

Outside Mount Measurement Guide

For an outside mount, the shade should be 3 to 6 inches wider than the window frame for better coverage. Measure the width and height of the outside window frame. For full blackout, an outside mount is recommended.

Figure 3: Outside Mount Measurement

2. 설치

내부 마운트 설치

Follow these steps to install your blinds using the inside mount method:

1. Mark punch positions for the mounting brackets, ensuring they are 5 inches from each end of the window frame.
2. 표시된 위치에 구멍을 뚫고 벽 앵커를 삽입하십시오.
3. 나사를 사용하여 장착 브래킷을 고정합니다.
4. Install the blind by sliding it into the brackets until it clicks into place.

Figure 4: Inside Mount Installation Guide

외부 마운트 설치

Follow these steps to install your blinds using the outside mount method:

1. Mark punch positions for the mounting brackets on the wall above the window frame, ensuring they are 5 inches from each end.
2. 표시된 위치에 구멍을 뚫고 벽 앵커를 삽입하십시오.
3. 나사를 사용하여 장착 브래킷을 고정합니다.
4. Install the blind by sliding it into the brackets until it clicks into place. You can choose between a standard roll or reverse roll.

Figure 5: Outside Mount Installation Guide

블라인드 작동법

원격 제어 작동

The Yoolax Lightwirl Remote provides convenient control over your blinds. It can control up to 9 blinds and offers various functions such as group control and adjusting the opening percentage. Refer to the remote's specific instructions for detailed programming.

Figure 6: Yoolax Lightwirl Remote

Smart Control with Alexa

Your Yoolax motorized blinds feature a Zigbee Motor, allowing direct compatibility with specific Alexa models without the need for an additional smart hub. Compatible Alexa models include: Echo Plus 2nd Gen, Echo Show 2nd Gen, Echo Studio, Echo Show 10, Echo 4th Gen, Echo Show 8 3rd Gen, and Echo Hub.

To enable voice control, ensure your blinds are paired with a compatible Alexa device. Once paired, you can use voice commands such as "Alexa, open the shades" or "Alexa, close the shades."

그림 7: Alexa를 이용한 음성 제어

유지

To maintain the quality and appearance of your Yoolax Motorized Blackout Smart Blinds, please follow these care instructions:

• 부분 세척만 가능: 부드러운 d를 사용하세요amp cloth to gently spot clean any soiled areas. Avoid harsh chemicals or abrasive cleaners, as these can damage the fabric or motor components.
• 가루 살포: Regularly dust the blinds with a soft brush or vacuum cleaner with a brush attachment to prevent dust buildup.
• Motor Charging: The built-in rechargeable battery motor can be used for 4-6 months on a full charge. Charge the motor using the provided standard charging cable. For extended battery life and energy saving, consider purchasing an optional solar panel charger from the Yoolax store.

Figure 8: Rechargeable Zigbee Motor and Charging Options

문제 해결

If you encounter any issues with your Yoolax Motorized Blackout Smart Blinds, please refer to the following common solutions:

• 블라인드가 리모컨에 반응하지 않음: Ensure the remote's battery is charged and correctly inserted. Try re-pairing the remote with the blinds according to the remote's specific instructions.
• Blinds not responding to Alexa: Verify that your Alexa device is compatible and properly connected to your home network. Check the Alexa app for any pairing issues or error messages. Ensure the blinds' motor is charged.
• 블라인드가 원활하게 움직이지 않음: Check for any obstructions in the window track or around the fabric. Ensure the blinds are correctly seated in their mounting brackets.
• Motor not charging: Confirm the charging cable is securely connected to both the motor and a power source. If using a solar panel, ensure it is receiving adequate sunlight.

If the problem persists, please contact Yoolax customer support for further assistance.

명세서

보증 및 지원

Yoolax provides a Free 3-year Motor Warranty for this product. In addition, if you receive damaged components, please take photos and contact us within 30 days for a free replacement.

For any questions, technical support, or warranty claims, please contact Yoolax customer service through the retailer where you purchased the product or visit the official Yoolax web연락처 정보 사이트.