1. 서론
This manual provides detailed instructions for the installation and operation of the BOTSLAB Hardwire Kit, specifically designed for the BOTSLAB G980H Dash Cam with a Type-C port. This kit enables advanced parking monitoring features and ensures continuous power supply to your dash cam while protecting your vehicle's battery.
2. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하십시오.
이미지: 패키지 구성품. This image displays the contents of the box, including the Hardwire Kit and the User Guide.
- 하드와이어 키트 1개
- 사용자 가이드 x 1
3. 제품 오버view
The BOTSLAB Hardwire Kit provides a stable power connection for your dash cam, enabling parking surveillance and protecting your vehicle's battery from discharge.
Image: Hardwire Kit Components. This diagram illustrates the main parts of the hardwire kit: the Type-C connector for the dash cam, the power conversion box, and the three color-coded wires (yellow for ACC, red for VCC+, black for GND-).
- C형 커넥터: Connects to the BOTSLAB G980H Dash Cam.
- Power Conversion Box: Regulates voltage and protects against battery drain.
- 노란색 전선(ACC): Connects to an Accessory (switched) power source.
- Red Wire (VCC+): Connects to a Constant (always-on) power source.
- Black Wire (GND-): Connects to a vehicle ground point.
Image: G980H Dash Cam with Hardwire Kit. This image shows the BOTSLAB G980H Dash Cam connected to the 9-foot (2.7-meter) long hardwire cable, highlighting its compatibility with various car models.
4. 주요 특징
- Secure Parking Protection: Provides up to 24 hours of surveillance with time-lapse recording or collision-triggered normal recording when parked.
- Battery Drain Prevention: 볼륨이 낮은 기능tage protection to prevent your car battery from discharging below a safe level.
- 폭넓은 호환성: The 2.7-meter (9-foot) cable is compatible with most vehicle types for versatile installation.
- 안전 기준: Meets relevant safety standards and certifications for reliable operation.
Image: Secure Parking Protection. This image illustrates the dash cam's parking mode functionality, showing a scenario where a vehicle is monitored, with options for time-lapse or collision-triggered recording.
Image: Battery Drain Prevention. This graphic displays the voltage specifications of the hardwire kit, including an input range of DC 12V-30V and an output of 5V/2.4A, ensuring the car battery is protected from excessive discharge.
5. 설치 가이드
Follow these steps for a proper installation of your BOTSLAB Hardwire Kit. Professional installation is recommended if you are unsure about any steps.
이미지: 간편한 설치 단계. This image provides a visual guide for the three main installation steps: testing power sources in the fuse box, connecting the ACC, VCC+, and GND- wires, and finally connecting the Type-C cable to the dash cam.
- Step 1: Test Power Sources
Use a multimeter to identify a 12V constant power source (always-on) and an ACC power source (switched with ignition) in your car's fuse box.
- Step 2: Set Up the Wires
- 연결하다 노란색 전선(ACC) to the identified ACC power source.
- 연결하다 빨간색 선 (VCC+) to the identified constant power source.
- 연결하다 Black Wire (GND-) to a suitable grounding point on the vehicle chassis.
- Step 3: Connect the Dash Cam
Attach the Type-C connector of the hardwire kit to the Type-C port on your BOTSLAB G980H Dash Cam.
Route the cables neatly along the vehicle's interior trim to conceal them and ensure they do not interfere with driving controls.
6. 운영
Once installed, the hardwire kit automatically manages power to your dash cam based on your vehicle's ignition status.
운전 모드
When your vehicle's ignition is on, the dash cam will receive constant power and operate in normal recording mode, capturing continuous footage.
주차 모드
When your vehicle's ignition is turned off, the hardwire kit will switch the dash cam into parking mode. In this mode, the dash cam can perform:
- 타임랩스 녹화: Continuously records at a low frame rate to save storage space and provide extended surveillance.
- Collision-Triggered Recording: Automatically records normal video footage when a significant impact or motion is detected, ensuring critical events are captured.
언더볼tage protection feature will monitor your car battery's voltage and automatically cut power to the dash cam if the voltage drops below a safe threshold, preventing battery depletion.
7. 유지관리
The BOTSLAB Hardwire Kit requires minimal maintenance. Ensure all connections remain secure and free from corrosion. Periodically check the cable routing to ensure it is not pinched or damaged.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 대시캠 전원이 켜지지 않습니다. | Incorrect wiring; Blown fuse; Low car battery voltage. |
|
| 주차 모드가 활성화되지 않습니다. | ACC wire not correctly connected; Dash cam settings. |
|
| 자동차 배터리가 빨리 방전됩니다. | 언더볼tage protection not functioning; Excessive parking mode duration. |
|
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 봇슬랩 |
| 모델명 | G980H |
| 입력 Voltag및 범위 | 직류 12V-30V |
| 출력 볼륨tag전자/현재 | 5V / 2.4A |
| 케이블 길이 | 2.7미터(9피트) |
| 커넥터 유형 | Type-C USB |
| 특징 | Parking Monitor, Under-Voltage 보호 |
| 호환 차량 유형 | 승용차, 트럭, 밴 |
| 제품 크기(D x W x H) | 6.8 x 18 x 3.8cm |
10. 보증 및 지원
For warranty information and technical support, please refer to the official BOTSLAB web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.
공식적인 Web대지: www.botslab.com (참고: 이것은 플레이스홀더입니다. URL. Please refer to your product packaging or official documentation for the correct support contact information.)