Piegricdiat Q26S Invisible Sleep Headphones User Manual

소개

This manual provides detailed instructions for the Piegricdiat Q26S Invisible Sleep Headphones. Designed for comfort and discreet use, these Bluetooth 5.3 wireless earbuds offer a comfortable audio experience, especially for side sleepers, with noise-blocking capabilities and IPX6 water resistance.

1. 패키지 내용

Upon opening your Piegricdiat Q26S Invisible Sleep Headphones package, you should find the following items:

• Piegricdiat Q26S Invisible Sleep Earbuds (Left and Right)
• 충전 케이스
• USB 충전 케이블
• 사용자 설명서

Figure 1: Piegricdiat Q26S earbuds inside their charging case, displaying charge indicator lights.

2. 설정 가이드

2.1 이어버드와 케이스 충전

Before initial use, fully charge the earbuds and the charging case. The charging case uses a USB-C port for charging.

1. 두 이어버드를 충전 케이스에 넣으세요. 이어버드가 제대로 끼워졌는지 확인하세요.
2. Connect the provided USB charging cable to the charging port on the case and to a compatible USB power source.
3. The indicator lights on the charging case will illuminate to show the charging status. The earbuds will also show a light (typically green) when charging.
4. 완전히 충전되면 표시등이 바뀌거나 꺼집니다.

Figure 2: The charging case with earbuds inserted. The case features indicator lights to show battery status.

2.2 블루투스 페어링

Follow these steps to pair your Piegricdiat Q26S earbuds with your device:

1. 이어버드가 충전되어 있는지 확인하세요.
2. Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing light (typically green).
3. 스마트폰이나 Bluetooth 지원 기기에서 Bluetooth 설정으로 이동하세요.
4. 검색 available devices and select "Q26S" from the list.
5. Once connected, the earbud light will flash slowly or turn off, and you may hear a voice prompt confirming the connection.

메모: If the earbuds do not pair automatically, remove both earbuds from the charging case. Press and hold the button on each earbud for approximately 5 seconds until the green lights flash rapidly. Then, place them back into the charging case. After charging, remove both earbuds simultaneously. Press the button on each earbud once. The earbuds will automatically pair with each other. One earbud's green light will flash rapidly, while the other will flash slowly. Activate the Bluetooth on your phone and search for "Q26S" to connect.

3. 사용 설명서

3.1 이어버드 착용하기

The Piegricdiat Q26S earbuds are designed for a comfortable and secure fit, especially for side sleepers. Gently insert each earbud into your ear canal, ensuring the soft silicone eartips and eartip caps provide a snug fit. Adjust for optimal comfort and sound isolation.

Figure 3: Earbuds designed for comfort, particularly for side sleepers.

Figure 4: The compact design of the earbud ensures a discreet and comfortable fit.

3.2 터치 컨트롤

The earbuds feature touch-sensitive controls for managing music playback and calls:

3.3 Switching to Sleep Mode

When connected to your phone, tap the left or right earbud button 3 times to switch to sleep mode. You will hear a prompt "sleeping mode." In sleep mode, no beeps or breathing lights are allowed to ensure an undisturbed experience.

Figure 5: Earbuds provide a snug fit to naturally block out noise for peaceful sleep.

4. 유지관리 및 관리

4.1 청소

최적의 성능과 위생을 유지하려면 이어버드와 충전 케이스를 정기적으로 청소하세요.

• 부드럽고 마른 보푸라기 없는 천으로 이어버드와 충전 케이스를 조심스럽게 닦으세요.
• If the silicone eartips are removable, detach them and clean with mild soap and water, then dry thoroughly before reattaching.
• Ensure the charging contact points on both the earbuds and inside the case are clean and free of debris to ensure proper charging.

4.2 방수 등급(IPX6)

The Piegricdiat Q26S earbuds are rated IPX6 waterproof, meaning they are protected against high-pressure water jets from any direction. This makes them suitable for use during activities where they might be exposed to sweat or rain. However, they are not designed for prolonged submersion or high-pressure water activities like diving.

Figure 6: IPX6 water resistance protects earbuds from sweat and rain.

5. 문제 해결

If you encounter issues with your Piegricdiat Q26S earbuds, refer to the following common solutions:

• 이어버드가 페어링 또는 연결되지 않음:
  • 두 개의 이어버드가 모두 완전히 충전되었는지 확인하세요.
  • Place earbuds back into the charging case, close the lid, then open it again to re-initiate pairing mode.
  • On your device, forget the "Q26S" Bluetooth connection and attempt to pair again.
  • If issues persist, try resetting the earbuds by following the manual pairing instructions (Section 2.2).
• 소리가 나지 않거나 볼륨이 낮음:
  • 연결된 기기와 이어버드의 볼륨 레벨을 모두 확인하세요.
  • Ensure the earbuds are properly seated in your ears for optimal sound delivery and noise isolation.
  • 이어버드가 올바른 장치에 연결되어 있는지 확인하세요.
• Intermittent connection or audio dropouts:
  • 기기가 블루투스 유효 범위(일반적으로 10미터/33피트) 내에 있고 눈에 띄는 장애물이 없는지 확인하십시오.
  • 다른 무선 장치의 간섭을 최소화하세요.
  • Fully charge the earbuds and the charging case.
• 이어폰이 충전되지 않음:
  • 충전 케이블이 케이스와 전원에 모두 단단히 연결되어 있는지 확인하세요.
  • 이어버드와 케이스 내부의 충전 접점이 깨끗하고 이물질이 없는지 확인하십시오.
  • 다른 USB 충전 케이블이나 전원 어댑터를 사용해 보세요.

6. 사양

7. 보증 및 지원

Piegricdiat products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included in your product packaging or contact the retailer where you purchased the product. Keep your proof of purchase for any warranty claims.

고객 지원

If you require further assistance or have questions not covered in this manual, please contact Piegricdiat customer support through the retailer's platform or the official brand website. When contacting support, please have your product model (Q26S) and purchase information ready.