OTOFIX TireGO 808 TPMS 프로그래밍 도구 사용 설명서

1. 서론

This manual provides detailed instructions for the safe and effective operation of the OTOFIX TireGO 808 TPMS Programming Tool. The TireGO 808 is designed to assist with various Tire Pressure Monitoring System (TPMS) tasks, including sensor activation, programming, relearning, and diagnostics. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. 안전 정보

Always observe the following safety precautions when using the OTOFIX TireGO 808:

가연성 액체, 가스 또는 먼지가 있는 곳 등 폭발 위험이 있는 환경에서는 장치를 작동하지 마세요.
Keep the device dry. Do not expose it to rain or wet conditions.
제조업체에서 지정한 액세서리만 사용하십시오.
기기를 떨어뜨리거나 심한 충격을 가하지 마십시오.
기기를 분해하거나 개조하지 마십시오. 수리는 반드시 공인 서비스 담당자만 수행해야 합니다.
Ensure the vehicle's ignition is off before connecting or disconnecting the OBDII cable, unless instructed otherwise by the device for specific procedures.

3. 제품 오버view

3.1 패키지 내용

The OTOFIX TireGO 808 package typically includes:

OTOFIX TireGO 808 Main Unit
USB 케이블
전원 어댑터
빠른 설명
운반 케이스
Main OBDII Cable

3.2 장치 기능

The OTOFIX TireGO 808 offers a range of features for comprehensive TPMS service:

TPMS Health Check
TPMS Programming (for OTOFIX MX-Sensors)
Sensor Relearn (OBD, Automatic, Stationary)
Sensor Activation (OE and universal TPMS sensors)
TPMS Diagnostics & Reset
Sensor Data Reading (ID, pressure, temperature, battery, position)
Quick Mode and Advanced Mode for varied user experience
Read/Clear TPMS Diagnostic Trouble Codes (DTCs)
Wi-Fi Updating for software and vehicle data
Key Fob Check (frequency and battery electricity)
TPMS ECU Unlock (for specific vehicle models like Toyota & Lexus)

OTOFIX TireGO 808 TPMS Programming Tool and accessories

Image 3.2.1: The OTOFIX TireGO 808 TPMS Programming Tool with its included accessories, including the main unit, OBDII cable, and carry case.

OTOFIX TireGO 808 displaying its one-stop TPMS tool capabilities

Image 3.2.2: The OTOFIX TireGO 808 device screen showing various TPMS functions and its capability to serve 315/433 MHz sensors.

4. 설정

4.1 초기 전원 켜기 및 충전

Connect the device to a power source using the provided USB cable and power adapter. The device will automatically power on or can be powered on by pressing the power button. Ensure the device is sufficiently charged before initial use.

4.2 Wi-Fi Connection and Software Updates

To ensure optimal performance and access to the latest vehicle data, it is crucial to keep the device's software updated. The TireGO 808 supports Wi-Fi updates.

From the main menu, navigate to 'My Device' or 'Settings'.
'Wi-Fi로 업데이트'를 선택하세요.
The device will scan for available Wi-Fi networks. Select your network and enter the password if prompted.
Once connected, select 'Latest Wi-Fi' or 'Update' to check for and download available software updates.
Keep the device connected to power during the update process.

OTOFIX TireGO 808 one-click WiFi updating process

Image 4.2.1: Illustration of the one-click Wi-Fi updating process for the OTOFIX TireGO 808, showing steps to connect to Wi-Fi and update software.

5. 사용 설명서

The OTOFIX TireGO 808 offers two main operational modes: 빠른 모드 for basic services and 고급 모드 for comprehensive TPMS functions.

5.1 센서 활성화

This function is used to trigger all OE and universal TPMS sensors to read their information.

Select 'Activate Sensors' from the main menu.
차량 제조사, 모델, 연식을 선택하세요.
Hold the tool near the tire valve stem.
Press the 'Trigger' button on the device.
The device will display sensor information such as ID, pressure, temperature, battery condition, and position.

OTOFIX TireGO 808 activating TPMS sensors and displaying data

Image 5.1.1: The OTOFIX TireGO 808 activating a TPMS sensor and displaying key data like sensor ID, tire pressure, temperature, battery, and position.

5.2 MX 센서 프로그래밍

This function allows you to program OTOFIX MX-Sensors to replace malfunctioning sensors. The tool offers two programming options:

자동 생성: Programs 1-16 MX-Sensors wirelessly within seconds.
OBD로 복사: Copies existing sensor IDs from the vehicle's ECU via the OBDII port, eliminating the need for relearn in many cases.

메모: This tool is designed to program OTOFIX MX-Sensors only.

OTOFIX TireGO 808 demonstrating MX-Sensor programming methods

Image 5.2.1: Visual representation of the MX-Sensor programming options: Auto Create and Copy by OBD, with the tool connected to a vehicle.

5.3 센서 재학습

After replacing TPMS sensors, a relearn procedure is necessary to link the new sensor IDs to the vehicle's TPMS ECU. The TireGO 808 supports three relearn methods:

OBD 재학습: Directly writes TPMS sensor IDs to the vehicle's TPMS module via the OBDII port.
자동 재학습: Requires driving the vehicle for a specified period (e.g., 10 minutes above 19 mph) to complete the relearn process.
고정된 재학습: Requires placing the vehicle in 'Learn Mode' and following on-screen instructions to match sensors with the car.

Detailed step-by-step guides are provided on the device screen for each method.

OTOFIX TireGO 808 showing three TPMS sensor relearn methods

Image 5.3.1: The OTOFIX TireGO 808 illustrating the three easy relearn methods: OBD Relearn, Automatic Relearn, and Stationary Relearn.

5.4 TPMS 진단

The diagnostic function allows for a comprehensive check of the TPMS system.

Connect the device to the vehicle's OBDII port.
메뉴에서 'TPMS 진단'을 선택하세요.
The tool will scan the entire TPMS system.
You can then read and clear TPMS Diagnostic Trouble Codes (DTCs) to identify and resolve issues.
Review data and print reports for deeper analysis if needed.

OTOFIX TireGO 808 performing TPMS diagnostics on a vehicle

Image 5.4.1: The OTOFIX TireGO 808 connected to a vehicle, performing TPMS diagnostics and displaying a low tire pressure warning on the dashboard.

5.5 Tire Type/Pressure Selection

If the TPMS warning light persists due to system configuration faults, this function allows you to set the correct tire type and pressure values.

Navigate to the 'Tire Type/Pressure Selection' option.
Follow the on-screen prompts to read the current tire type/pressure.
Select and save the correct tire type and pressure settings for your vehicle.
Trigger the sensors to write the new settings to the vehicle's ECU.

메모: This function primarily serves American-made vehicles.

OTOFIX TireGO 808 demonstrating tire type and pressure selection

Image 5.5.1: The OTOFIX TireGO 808 screen showing the steps for selecting and saving tire type and pressure settings.

5.6 추가 기능

The TireGO 808 includes other useful functions:

키 fob 테스트: Checks key frequency and battery electricity.
TPMS ECU Unlock: For specific Toyota and Lexus models.
Sensor Data Printing: Allows printing of sensor data via a PC connection.
History Test Record: Stores previous test results for review.

OTOFIX TireGO 808 additional features like key fob test and data printing

이미지 5.6.1: 이상view of additional features of the OTOFIX TireGO 808, including Key Fob Test, TPMS ECU Unlock, Sensor Data Printing, and History Test Record.

6. 유지관리

6.1 소프트웨어 업데이트

Regularly update the device software via Wi-Fi to ensure compatibility with new vehicle models and TPMS sensors, and to receive performance enhancements. Refer to Section 4.2 for detailed update instructions.

6.2 청소

부드러운 천으로 장치를 청소하십시오.amp cloth. Do not use abrasive cleaners or solvents. Keep the screen free of dust and debris for optimal visibility.

6.3 보관

Store the device in its protective carry case when not in use. Keep it in a dry environment, away from extreme temperatures and direct sunlight.

7. 문제 해결

This section addresses common issues you might encounter with the OTOFIX TireGO 808.

문제	가능한 원인	해결책
장치 전원이 켜지지 않음	Low battery; Power button not pressed correctly; Device malfunction	Charge the device; Press and hold the power button; Contact support if issue persists.
Wi-Fi update fails	Poor Wi-Fi signal; Incorrect password; Server issue	Ensure strong Wi-Fi signal; Verify password; Try again later or contact support.
Cannot activate sensor	Tool not close enough to sensor; Sensor faulty; Incorrect vehicle selection	Hold tool within 4 inches of valve stem; Check sensor condition; Verify vehicle make/model/year.
Sensor relearn fails	Incorrect relearn procedure; Vehicle not in learn mode; Sensor not programmed	Follow on-screen instructions precisely; Ensure vehicle is in learn mode; Confirm sensors are correctly programmed.
Device freezes or is unresponsive	소프트웨어 오류; 배터리 부족	Perform a hard reset (refer to quick guide); Charge the device; Update software.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact OTOFIX customer support.

8. 사양

Technical specifications for the OTOFIX TireGO 808:

모델: OTOFIX TSGO 808
품목 무게: 3.99파운드
제품 크기: 5.12 x 5.12 x 8.66 인치
표시하다: 2.8인치, 320x240 해상도
배터리: 3.7V 3200mAh (1 AA battery included)
연결성: 와이파이, USB
TPMS Frequencies: 315MHz / 433MHz
제조업체 부품 번호: OTOFIX TSGO 808
한국어: 850052860462

OTOFIX TireGO 808 highlighting quality, updates, and specifications

Image 8.1.1: The OTOFIX TireGO 808 showcasing its hardware specifications, lifetime updating, and customer service commitment.

9. 보증 및 지원

OTOFIX is committed to providing reliable products and customer satisfaction.

평생 무료 업데이트: The OTOFIX TireGO 808 includes lifetime free software updates to ensure the tool remains current with new vehicle models and TPMS technologies.
2-Year Undertaking: Specific warranty details are provided with the product documentation. Please refer to the warranty card for terms and conditions.
온라인 응답: OTOFIX offers 24/7 online support for technical assistance and inquiries.

For further assistance, please visit the official OTOFIX website or contact their customer support channels as indicated in your product packaging or quick guide.