TP-Link Archer BE400 WiFi 7 Router Instruction Manual

1. 서론

The TP-Link Archer BE400 is a high-performance WiFi 7 router designed to deliver exceptional speed and stability for your home network. Featuring BE6500 dual-band Wi-Fi, it supports speeds of up to 5765 Mbps on the 5GHz band and 688 Mbps on the 2.4GHz band. This router is equipped with advanced Wi-Fi 7 technologies such as Multi-Link Operation (MLO), 4K-QAM, and Multi-RU, ensuring efficient data transmission and reduced latency for demanding applications like 4K/8K streaming, online gaming, and VR/AR experiences.

The Archer BE400 also includes versatile connectivity options with one 2.5Gbps WAN port, one 2.5Gbps LAN port, and three Gigabit LAN ports. It supports EasyMesh for seamless whole-home Wi-Fi coverage and integrates HomeShield security features for enhanced network protection, parental controls, and Quality of Service (QoS). With support for VPN server/client and WPA3 encryption, the Archer BE400 provides a secure and robust networking solution.

Image: The Archer BE400 router shown in both vertical standing and wall-mounted orientations, demonstrating flexible installation options.

2. 패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• TP-Link Archer BE400 WiFi 7 라우터
• 전원 어댑터
• 이더넷 케이블
• 빠른 설치 가이드

3. 신체적 이상view

Familiarize yourself with the ports and indicators on your Archer BE400 router.

3.1. 전면 패널 표시기

The front panel features LED indicators that display the router's status, including power, internet connection, and Wi-Fi activity.

3.2. 후면 패널 포트 및 버튼

• 전원 포트: 제공된 전원 어댑터에 연결합니다.
• 켜기/끄기 버튼: 라우터의 전원을 켜거나 끕니다.
• 2.5Gbps WAN 포트: 인터넷 접속을 위해 모뎀에 연결합니다.
• 2.5Gbps LAN 포트: Connects to a wired device for high-speed local network access.
• 기가비트 LAN 포트(x3): 컴퓨터, 게임 콘솔, 스마트 TV 등 유선 장치에 연결됩니다.
• 재설정 버튼: 몇 초간 길게 누르면 공장 기본 설정으로 복원됩니다.

Image: The rear panel of the Archer BE400, highlighting the 2.5Gbps WAN and LAN ports, along with three Gigabit LAN ports.

4. 설정 지침

Follow these steps to set up your Archer BE400 router:

1. 하드웨어 연결:
   • Power off your modem and remove its backup battery (if applicable).
   • Connect the modem to the router's 2.5Gbps WAN port using an Ethernet cable.
   • Power on the modem, then wait for about 2 minutes for it to start up.
   • Connect the power adapter to the router and plug it into a power outlet. Power on the router.
2. Tether 앱을 다운로드하세요:

   Download the TP-Link Tether app on your smartphone or tablet. You can scan the QR code below or search for "TP-Link Tether" in your app store.

   

   Image: A smartphone showing the TP-Link Tether app interface for router setup, positioned next to the Archer BE400 router.

   For the Tether app, visit: https://www.tp-link.com/app/qrcode/?app=tether

3. Configure via Tether App:

   Open the Tether app and follow the on-screen instructions to complete the router setup, including creating a TP-Link ID, setting up your Wi-Fi network name (SSID) and password, and configuring internet settings.

5. 작동 모드

The Archer BE400 supports two main operating modes:

5.1. Router Mode (Default)

In Router Mode, the device acts as your primary internet gateway, sharing your internet connection with all connected devices via Wi-Fi and Ethernet. This is the default mode and is suitable for most home networks.

5.2. Access Point Mode (Bridge Mode)

In Access Point Mode, the device extends your existing wired network to wireless devices. It connects to an existing router via an Ethernet cable and broadcasts a Wi-Fi signal, essentially turning your wired network into a wireless one. This mode is useful for expanding Wi-Fi coverage in a larger home or office.

6. 고급 기능

6.1. 와이파이 7 기술

The Archer BE400 leverages the latest Wi-Fi 7 (802.11be) standard, offering significant improvements in speed, capacity, and efficiency:

• 다중 링크 작업(MLO): MLO allows devices to send and receive data across different frequency bands (e.g., 2.4GHz and 5GHz) simultaneously, enhancing throughput and reducing latency.
• 4K-QAM: This advanced modulation scheme packs more data into each signal, increasing raw data rates by up to 20% compared to 1024-QAM in Wi-Fi 6/6E.
• 다중 RU: Enables more flexible allocation of spectrum resources, allowing multiple users to transmit data simultaneously with greater efficiency.

Image: A table comparing Wi-Fi 7 features such as MLO, 6GHz+320MHz channels, 4K-QAM, and Multi-RU with previous Wi-Fi standards (Wi-Fi 6E, Wi-Fi 5).

Image: A visual representation of Multi-Link Operation (MLO), showing the Archer BE400 router communicating with a Wi-Fi 7 device over both 5GHz and 2.4GHz bands simultaneously for improved performance.

6.2. 2.5Gbps Wired Connections

The Archer BE400 is equipped with a 2.5Gbps WAN port and a 2.5Gbps LAN port, allowing you to take full advantage of high-speed internet connections and connect high-bandwidth devices directly to your network for optimal performance.

이미지: 자세한 view of the Archer BE400's rear panel, emphasizing the 2.5Gbps WAN and LAN ports for next-generation high-speed wired connectivity.

6.3. EasyMesh 호환성

The Archer BE400 is EasyMesh compatible, allowing you to create a seamless whole-home mesh Wi-Fi network by adding other EasyMesh-compatible routers or range extenders. This eliminates Wi-Fi dead zones and provides a unified network name for smooth roaming throughout your home.

Image: A diagram illustrating an EasyMesh network, showing how the Archer BE400 router works with another EasyMesh device to provide seamless Wi-Fi coverage and smart roaming.

6.4. 홈쉴드 보안

TP-Link HomeShield는 가정용 네트워크와 연결된 기기를 보호하기 위한 다양한 보안 기능을 제공합니다.

• 네트워크 스캐너: Detects potential threats in real-time.
• 보호자 관리: 가족 구성원의 온라인 사용 시간을 관리하고 부적절한 콘텐츠를 차단하세요.
• 서비스 품질(QoS): 특정 장치 또는 애플리케이션에 대역폭 우선순위를 지정하여 원활한 성능을 보장하십시오.

이미지: 스크린샷asing the HomeShield features, including network scanning for threats, parental control settings, and QoS configuration options.

6.5. VPN 지원

The Archer BE400 supports both VPN server and VPN client functionalities, allowing you to establish secure connections:

• VPN 서버: Access your home network securely from outside.
• VPN 클라이언트: 네트워크 전체를 VPN 서비스에 연결하여 연결된 모든 장치를 보호하세요.

Image: A diagram illustrating the VPN capabilities of the Archer BE400, showing how it can act as both a VPN server and a VPN client to secure network traffic.

7. 유지관리

7.1. 펌웨어 업데이트

Regularly update your router's firmware to ensure optimal performance, security, and access to new features. Firmware updates can typically be performed via the TP-Link Tether app or through the router's web 관리 인터페이스.

7.2. 공장 초기화

If you encounter persistent issues or wish to clear all configurations, you can perform a factory reset. With the router powered on, press and hold the Reset button on the rear panel for approximately 5-10 seconds until the LEDs flash. The router will then restart with its factory default settings.

8. 문제 해결

일반적으로 발생할 수 있는 문제에 대한 해결책은 다음과 같습니다.

• 인터넷 접속 불가:
  • 모뎀이 제대로 작동하는지 확인하세요.
  • 모든 케이블이 라우터와 모뎀에 단단히 연결되어 있는지 확인하십시오.
  • 모뎀과 라우터를 다시 시작하세요.
  • Verify your internet settings in the Tether app or web 인터페이스.
• 느린 Wi-Fi 속도:
  • Ensure your devices are connected to the appropriate Wi-Fi band (5GHz for higher speeds, 2.4GHz for wider coverage).
  • Reduce interference by placing the router away from other electronic devices.
  • Consider using EasyMesh to extend coverage if your home is large.
  • 펌웨어 업데이트를 확인하십시오.
• 잦은 연결 끊김:
  • Ensure the router is placed in a central location, away from obstructions.
  • Update device drivers on your client devices.
  • Perform a factory reset if the issue persists after other troubleshooting steps.

9. 사양

10. 보증 및 지원

10.1. 보증 정보

The TP-Link Archer BE400 comes with a 3년 제조사 보증보증 청구를 위해 구매 증빙 서류를 보관하세요.

10.2. 기술 지원

For technical assistance, troubleshooting, or any inquiries regarding your product, please visit the official TP-Link Japan web지원 리소스와 연락처 정보를 제공하는 사이트입니다.

Official TP-Link Japan Web대지: https://www.tp-link.com/jp/support/