잉크버드 IIC-400-WIFI
Inkbird IIC-400-WIFI 4-Zone Smart Irrigation Controller User Manual
모델: IIC-400-WIFI
1. 서론
Thank you for choosing the Inkbird IIC-400-WIFI 4-Zone Smart Irrigation Controller. This device is designed to provide efficient and automated watering for your garden, lawn, or landscape. With WiFi connectivity, you can manage your irrigation system remotely via a dedicated application, offering flexibility and water-saving features. This manual will guide you through the installation, setup, operation, and maintenance of your new irrigation controller.

2. 안전 정보
- 설치 및 작동 전에 모든 지침을 주의 깊게 읽으십시오.
- This device is designed for outdoor and indoor use and features a weatherproof cover. Ensure the cover is properly sealed when installed outdoors to protect against dust, wind, sand, and rain.
- Only use the provided power adapter. Using an incorrect adapter may damage the device or pose a safety risk.
- 전기적 위험을 방지하기 위해 모든 배선 연결이 안전하고 정확한지 확인하십시오.
- 장치와 구성품을 어린이의 손이 닿지 않는 곳에 보관하세요.
- 제품을 직접 분해하거나 수리하려고 하지 마십시오. 도움이 필요하시면 고객 지원 센터에 문의하십시오.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x Inkbird IIC-400-WIFI Smart Irrigation Controller
- 1 x 전원 어댑터
- 1 x 사용자 설명서
- Mounting Screws with Anchors (3 pcs)
- Wiring Connectors (4 pcs)
- 1 x 드라이버
- 접착 성 라벨

4. 제품 오버view
The Inkbird IIC-400-WIFI is a 4-zone smart irrigation controller designed for comprehensive garden watering management. It offers both automatic and manual watering modes, allowing for flexible control tailored to your specific needs. Key features include:
- 4존 제어: Manage up to four independent watering zones.
- WiFi 연결성: Control and monitor your system remotely via the Inkbird app.
- 비 휘발성 기억 장치: Retains all settings indefinitely, even after power loss.
- 계절 조정: Easily modify watering duration across all zones with a single setting to adapt to changing seasons.
- Rain Skip Function: Connect an optional rain sensor to automatically pause watering during rainy conditions, conserving water.
- Multiple Watering Options: Choose from daily, cyclic (every X days), odd days, or even days watering schedules.
- 시작 시간이 여러 개인 경우: Set up to 6 start times per day for each zone.

5. 설정
5.1 물리적 설치
- Choose a suitable location for the controller. It can be installed indoors or outdoors, but ensure it is protected from direct sunlight and extreme weather conditions.
- Use the provided mounting screws and anchors to securely attach the controller to a wall or sturdy surface.

5.2 배선 연결
Connect your irrigation valves and power adapter to the controller as follows:
- Master Valve/Pump (M): Connect the common wire from your master valve or pump to the 'M' terminal.
- Zone Valves (1-4): Connect the control wires from each of your 4 zone valves to the corresponding numbered terminals (1, 2, 3, 4).
- Common Wire (C): Connect the common wire from all your zone valves to the 'C' terminal.
- Rain Sensor (S): If using an optional rain sensor, connect its wires to the 'S' terminals.
- Power (24VAC): Connect the provided power adapter to the '24VAC' terminals.

5.3 앱 다운로드 및 Wi-Fi 연결
- Download the "Inkbird Irrigation" app from the App Store (iOS) or Google Play Store (Android).
- 계정을 등록하거나 이미 계정이 있는 경우 로그인하십시오.
- 스마트폰이 다음에 연결되어 있는지 확인하세요. 2.4GHz WiFi 네트워크. The controller does not support 5GHz networks.
- Open the app, tap the "+" icon in the top right corner to add a device, and select "IIC-400-WIFI".
- Follow the on-screen instructions in the app to connect the controller to your WiFi network. This typically involves pressing a button on the controller to enter pairing mode.
- Once connected, the WiFi indicator on the controller will be solid, and the device will appear in your app.

6. 사용 설명서
All operations are performed through the Inkbird Irrigation app.

6.1 자동 물주기 모드
The controller offers four cyclic options to determine watering frequency for each zone:
- 요일: Select specific days (e.g., Mon, Wed, Fri).
- 간격 : Water every 'X' number of days.
- 이상한 날들: 매달 홀수 날에 물을 주세요.
- 짝수일: 매달 짝수 날에 물을 주세요.
You can program a separate watering schedule for each zone.

6.2 시작 시간 설정
For each zone, you can set up to 6 start times per day. This allows for precise watering based on plant needs and environmental conditions.
6.3 수동 급수
To provide extra water in dry weather or for specific needs, you can initiate manual watering:
- Open the Inkbird Irrigation app.
- Navigate to the manual watering section.
- Select the desired zone(s) and set the watering duration.
- Start the manual watering cycle.
6.4 계절 조정
The seasonal adjustment feature allows you to easily modify the watering duration for all active programs with a single setting. This is useful for adapting to seasonal changes without reprogramming each schedule individually.
- In the app, find the Seasonal Adjustment setting.
- 퍼센트 조정tage to increase or decrease watering duration across all zones. For example, setting it to 50% will halve all scheduled watering times.

6.5 Rain Skip Function
If an optional rain sensor is connected, the controller can automatically pause irrigation during rainfall, preventing overwatering and saving water.
- Ensure your rain sensor is correctly wired to the 'S' terminals.
- Enable the rain skip function within the app settings.
- The system will automatically detect rain and temporarily suspend scheduled watering.


6.6 Viewing Watering History
앱을 사용하면 다음을 수행할 수 있습니다. view your watering schedules for the next 3 months and review the history of the last 6 months. This helps in monitoring water usage and optimizing schedules.

7. 유지관리
- 청소: 컨트롤러 외부를 부드러운 천으로 닦으세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 연결 확인: 모든 배선 연결부를 정기적으로 검사하여 안전하고 부식되지 않았는지 확인하세요.
- 날씨 보호: If installed outdoors, ensure the weatherproof cover remains properly sealed to protect internal components.
- 소프트웨어 업데이트: Keep the Inkbird Irrigation app updated to the latest version for optimal performance and new features.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Controller not connecting to WiFi | Incorrect WiFi password; 5GHz network selected; router too far; weak signal. | Ensure correct 2.4GHz WiFi network and password. Move controller closer to router or use a WiFi extender. Restart controller and router. |
| 물을 주지 않는 구역 | No power to controller; incorrect wiring; valves not working; rain skip active; schedule not set. | Check power adapter connection. Verify wiring to valves. Test valves manually. Check app for active rain skip or schedule settings. |
| 앱에 기기가 오프라인으로 표시됩니다. | WiFi disconnected; internet outage; controller power loss. | Check home WiFi and internet connection. Verify controller has power. Reconnect controller to WiFi via app if necessary. |
| Seasonal adjustment not working | Feature not enabled or incorrectly set in app. | Ensure seasonal adjustment is enabled and the percentage is set as desired in the app settings. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | IIC-400-와이파이 |
| 상표 | 잉크버드 |
| 존의 수 | 4 |
| 권tage | 24볼트 |
| 재료 | 아크릴로니트릴 부타디엔 스티렌(ABS) |
| 품목 무게 | 933그램 |
| 색상 | 하얀색 |
| 디스플레이 유형 | LCD 또는 LED |
| 연결성 | WiFi(2.4GHz만 해당) |
| 비 휘발성 기억 장치 | 통합 |
10. 보증 및 지원
Inkbird products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your Inkbird IIC-400-WIFI controller, please refer to the official Inkbird web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.
추가 지원이 필요하면 다음을 방문하세요. www.inkbird.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.