Twisted Minds TM-GM-II

Twisted Minds Spider 03 Mid-Tower Gaming PC Case Instruction Manual

Model: TM-GM-II

1. 서론

This instruction manual provides essential information for the proper installation, operation, and maintenance of your Twisted Minds Spider 03 Mid-Tower Gaming PC Case. Please read this manual thoroughly before beginning assembly or use to ensure optimal performance and longevity of your product. Keep this manual for future reference.

2. 안전 정보

  • Always disconnect power from all components before installing or removing any parts from the PC case.
  • 강화유리 패널은 조심해서 다루십시오. 깨지기 쉬우므로 떨어뜨리거나 충격을 가하면 파손될 수 있습니다.
  • PC 케이스를 직사광선이나 열원 근처에 두지 마십시오.
  • 전기 위험을 방지하기 위해 적절한 접지를 확인하십시오.
  • 작은 부품과 나사는 어린이의 손이 닿지 않는 곳에 보관하십시오.

3. 패키지 내용

아래 나열된 모든 품목이 패키지에 들어 있는지 확인하세요.

  • Twisted Minds Spider 03 Mid-Tower Gaming PC Case
  • 부속품 상자 (나사, 케이블 타이 및 기타 작은 부품 포함)
  • 사용 설명서 (본 문서)

4. 제품 오버view

The Twisted Minds Spider 03 is a mid-tower gaming PC case designed for high-performance builds. It features a full tempered glass side panel for component visibility and a robust steel frame. The case supports various cooling configurations and offers ample space for internal components.

앞쪽 view of the Twisted Minds Spider 03 PC Case with RGB fans visible through the mesh front panel.

그림 4.1: 전면 view PC 케이스의 경우,asing the mesh design and pre-installed RGB fans.

내부 view of the Twisted Minds Spider 03 PC Case through the tempered glass side panel, showing fan mounts and internal layout.

그림 4.2: 내부 view with the tempered glass side panel, illustrating the spacious layout for components.

뒤쪽 view of the Twisted Minds Spider 03 PC Case, showing PCI slots, rear fan mount, and power supply opening.

그림 4.3: 후면 view of the PC case, highlighting the PCI expansion slots and rear fan mount.

위에서 아래로 view of the PC case's front I/O panel, showing USB ports, audio jacks, and power/reset buttons.

Figure 4.4: Top I/O panel with USB 3.0, USB 1.0, and HD audio ports.

주요 특징:

  • 설계: Features a full tempered glass left side panel for clear internal visibility and a robust metal right panel.
  • 냉각 지원: Accommodates 240mm or 360mm liquid cooling radiators in the front. Additional fan mounts are available at the top, rear, and on the PSU shroud.
  • 연결성: Front I/O panel includes USB 3.0, USB 1.0, and HD audio ports for convenient peripheral access.
  • 호환성: Supports ATX, M-ATX, and IT motherboards. Provides space for two 3.5" HDDs and two 2.5" SSDs, along with seven PCI expansion slots.
  • 유지: Equipped with a magnetic dust filter on the top panel and a PVC filter on the bottom to minimize dust accumulation.

5. 설정 및 설치

Follow these steps to install your components into the Twisted Minds Spider 03 PC case:

폭발했다 view of the Twisted Minds Spider 03 PC Case, showing individual components like panels, frame, and fan mounts.

그림 5.1: 폭발 view of the PC case, illustrating its modular design.

  1. 사례 준비: Place the case on a flat, stable surface. Remove the tempered glass side panel by unscrewing the four thumb screws. Remove the right metal side panel.
  2. 마더보드 설치: Install the necessary standoffs for your motherboard (ATX, M-ATX, or IT). Carefully place your motherboard into the case and secure it with screws.
  3. CPU 쿨러 설치: If using an air cooler, install it before or after the motherboard, depending on its design. For liquid coolers, mount the radiator (up to 360mm in front) and secure the pump to the CPU.
  4. 그래픽 카드(GPU) 설치: Open the required PCI expansion slots (up to 7 available). Insert your graphics card into the PCIe slot and secure it with screws. The case supports GPUs up to 340mm in length.
  5. 저장 드라이브 설치: Mount your 3.5" HDDs and 2.5" SSDs into the designated bays. The case supports two 3.5" HDDs and two 2.5" SSDs.
  6. 전원 공급 장치(PSU) 설치: Slide your PSU into its designated compartment at the bottom of the case and secure it with screws. The case accommodates PSUs between 17.5 cm and 20 cm.
  7. 케이블 관리 : Route all power and data cables through the cutouts in the motherboard tray to the rear of the case for a clean build and improved airflow.
  8. 전면 I/O 케이블 연결: Connect the front panel cables (USB 3.0, USB 1.0, HD Audio, Power, Reset, LED) to the corresponding headers on your motherboard.
  9. 패널을 다시 부착하세요: Once all components are installed and cables are managed, reattach the right metal side panel and the tempered glass side panel.

6. 사용 설명서

After completing the setup, ensure all external peripherals (monitor, keyboard, mouse, etc.) are connected. Press the power button on the front I/O panel to start your system. The front panel also includes USB 3.0 and USB 1.0 ports for connecting various devices and HD audio jacks for headphones and microphones.

7. 유지관리

정기적인 유지 관리는 PC 케이스의 성능과 외관을 유지하는 데 도움이 됩니다.

  • 먼지 필터: The case is equipped with a magnetic dust filter on the top panel and a PVC filter on the bottom. Regularly remove and clean these filters to prevent dust buildup and maintain optimal airflow. Clean with compressed air or a soft brush.
  • 외부 청소: 부드러운 d를 사용하세요amp cloth to wipe down the exterior surfaces of the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
  • 내부 청소 : Periodically open the side panels and use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.

8. 문제 해결

If you encounter issues with your PC case, consider the following common problems and solutions:

  • 시스템 전원이 켜지지 않음:
    • Check if the power supply is properly connected and switched on.
    • 전면 패널 전원 버튼 케이블이 마더보드에 올바르게 연결되어 있는지 확인하십시오.
    • Ensure all internal power cables (24-pin ATX, 8-pin CPU, PCIe for GPU) are securely connected.
  • 과열된 구성 요소:
    • Clean dust filters and internal fans to improve airflow.
    • Ensure fans are installed in the correct orientation (intake/exhaust).
    • CPU 쿨러와 GPU 팬이 제대로 작동하는지 확인하십시오.
  • 전면 패널 USB/오디오가 작동하지 않습니다.
    • Check if the USB and HD Audio cables from the front panel are securely connected to the correct headers on the motherboard.
    • 메인보드 드라이버가 최신 버전인지 확인하십시오.

9. 사양

특징사양
모델 번호TM-GM-II
재료0.45mm SPCC (Cold Rolled Commercial Steel Sheets), Black
Chassis Dimensions (L x W x H)35.5 x 19.5 x 43.5cm
케이스 크기(L x W x H)39.5 x 19.5 x 45.0cm
마더보드 호환성ATX / M-ATX / IT
스토리지 베이3.5인치 HDD 2개, 2.5인치 SSD 2개
Cooling Support (Front)240mm / 360mm Liquid Cooler or 3 x 120mm Fans
Cooling Support (Rear)1 x 120mm 팬
냉각 지원(상단)2 x 120mm / 140mm Fans
Cooling Support (PSU Shroud)2mm 팬 120개
PCI 확장 슬롯7
최대 GPU 길이34 cm (Front panel without fan)
최대 CPU 쿨러 높이16cm
PSU Size Compatibility17.5~20cm
먼지 필터Top (Magnetic), Bottom (PVC)
사이드 패널Full Tempered Glass with 4 screws
제품 무게5.32kg

10. 보증 및 지원

Twisted Minds products are designed for quality and reliability. For warranty information, please refer to the warranty card included with your purchase or visit the official Twisted Minds website. If you encounter any issues or require technical assistance, please contact Twisted Minds customer support through their official channels.

연락처 정보: 방문해주세요 Twisted Minds Store for support and further product information.

© 2026 Twisted Minds. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.