HYVOHEX P100 Portable Electric Ball Pump Instruction Manual

1. 서론

The HYVOHEX P100 Portable Electric Ball Pump is designed for efficient and precise inflation of various sports balls. This device features a digital LED display, preset pressure functionality, and automatic shut-off, making it suitable for basketballs, soccer balls, volleyballs, and more. Its compact design and rechargeable battery ensure convenience and portability.

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x HYVOHEX P100 Sports Pump
• 1 x 볼 바늘
• 1 x USB-C Charging Cable (not explicitly listed but implied by rechargeable battery)

3. 제품 특징

• 빠른 인플레이션: Quickly inflates sports balls, reducing manual effort and saving time.
• 스마트한 운영: Equipped with a high-sensitivity pressure sensor and digital LED screen to detect current ball pressure and automatically stop upon reaching the preset pressure.
• 폭넓은 호환성: Supports a pressure range of 2-17 PSI, suitable for basketball, soccer, volleyball, and other inflatable sports equipment.
• 메모리 기능: Retains the last pressure setting for quick and easy repeated use.
• 휴대성 있는 디자인: Compact, palm-sized unit with built-in hidden needle storage for easy transport and to prevent loss or damage of the needle.
• 충전식 배터리: Features a 1500mAh rechargeable battery for multiple inflations on a single charge, with USB-C charging and an LED battery indicator.

Image: The HYVOHEX P100 pump is compact and portable, fitting easily in one hand.

Image: The 1500mAh battery allows for inflation of approximately 45 balls per charge.

4. 설정

1. 기기 충전: Before first use, fully charge the ball pump using the provided USB-C cable. The LED battery indicator will show charging status.
2. Attach the Needle: Retrieve the inflation needle from the hidden storage compartment (located at the top of the pump). Carefully screw the needle into the inflation port on the top of the device.

Image: The inflation needle can be securely stored within the pump's top compartment.

5. 사용 설명서

1. 전원 켜기: Press and hold the power button (central button) to turn on the device. The digital LED display will illuminate.
2. 압력 단위 선택: Long press the power button to cycle through pressure units: PSI, BAR, KPA. Release the button when your desired unit is displayed.
3. 원하는 압력 설정: Use the '+' and '-' buttons to adjust the target pressure. Refer to the ball manufacturer's recommendations for optimal pressure (e.g., Basketball: 7-9 PSI, Football: 12-14 PSI, Soccer: 8-16 PSI, Volleyball: 4-5 PSI). The pump will remember your last setting.
4. 바늘 삽입: Carefully insert the attached needle into the ball's valve. The display will show the current pressure of the ball.
5. 인플레이션 시작: Press the power button once to start inflation. The pump will automatically stop when the preset pressure is reached.
6. 전원 끄기 : 전원 버튼을 길게 눌러 장치를 끕니다.

Image: The pump is compatible with various sports balls, with recommended pressure ranges displayed.

Image: Long press the power button to switch between PSI, Bar, and KPA pressure units.

6. 유지관리

• 충전 중: Recharge the device regularly to maintain battery health. Use a standard USB-C charger.
• Needle Storage: Always store the inflation needle in its designated compartment when not in use to prevent bending or loss.
• 청소: Wipe the pump's exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• 저장: 직사광선 및 극한의 온도를 피하고 서늘하고 건조한 곳에 펌프를 보관하십시오.

7. 문제 해결

• 펌프가 작동하지 않음: Ensure the battery is charged. Connect to a USB-C power source and allow it to charge for at least 30 minutes before attempting to power on again.
• Ball not inflating: Check that the needle is securely attached to the pump and fully inserted into the ball's valve. Verify that the preset pressure is higher than the current ball pressure.
• 부정확한 압력 판독: Ensure the needle is fully inserted into the ball's valve. If the issue persists, try recalibrating by turning the pump off and on again.
• 펌프가 조기에 멈춥니다: The pump automatically stops when the preset pressure is reached. If it stops before the ball is firm enough, increase the preset pressure.
• 펌프가 시끄럽습니다. A certain level of operating noise is normal for air pumps. If the noise is excessive or unusual, ensure no obstructions are present in the air intake or output.

8. 사양

9. 안전 정보

• Do not use the pump for purposes other than inflating sports balls.
• Keep out of reach of children. Adult supervision is recommended during use.
• Avoid over-inflating balls beyond their recommended pressure, as this can cause damage or injury.
• 장치를 물이나 극한의 온도에 노출시키지 마십시오.
• 기기를 직접 분해하거나 수리하지 마십시오. 문제가 발생하면 고객 지원팀에 문의하십시오.
• Ensure the inflation needle is properly secured before use to prevent accidental detachment.

10. 보증 및 지원

Specific warranty details and customer support contact information are not provided within this document. Please refer to the manufacturer's official website or the product packaging for comprehensive warranty terms and support options.