VOLT Stemless Directional Brass Path Light (Bronze) Instruction Manual

1. 서론

Thank you for choosing the VOLT Stemless Directional Brass Path Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new low voltage landscape lighting fixture. This path light is designed for outdoor use, providing widespread illumination for pathways, walkways, gardens, driveways, and patios.

Image: The VOLT Stemless Directional Brass Path Light installed along a pathway, providing warm illumination.

2. 안전 정보

설치 및 사용 전에 모든 지침을 주의 깊게 읽어 주십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 기타 위험이 발생할 수 있습니다. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.

• This product is intended for use with a 12V low voltage landscape lighting system. A low voltage transformer (not included) is required for operation.
• Do not connect directly to 120V household current.
• Ensure power is disconnected at the transformer before installing or servicing the fixture.
• All electrical connections must comply with local codes and ordinances. If you are unsure about installation, consult a qualified electrician.
• Do not operate the fixture with a damaged cord or if the lens is cracked.
• 어린이와 애완동물이 설치 장소에 접근하지 못하도록 하세요.
• This fixture is designed for outdoor use and is water-resistant. However, avoid submerging the fixture in water.

3. 상자 안에 무엇이 들어있나요?

패키지에는 다음과 같은 구성 요소가 포함되어 있습니다.

• VOLT Stemless Directional Brass Path Light
• 9-inch Ground Stake
• Mounting Hardware (for surface mounting)

메모: A G4 LED bi-pin bulb and a low voltage transformer are sold separately and are required for full functionality.

4. 특징

• 로우 프로file 설계: Standing 1.96 inches tall with a 2.71-inch diameter, this light minimizes obstruction and risk of damage.
• Professional Grade Construction: Made from solid cast brass with a bronze finish and a heavy frosted acrylic lens for durability.
• Lamp 준비가 된: Designed for use with a G4 LED bi-pin bulb (not included) rated up to 20W, providing 140 degrees of light output.
• 다양한 장착: Includes a 9-inch ground stake for landscape installation and hardware for surface mounting.
• 부식 저항성: Features a beryllium copper socket for enhanced corrosion resistance.
• Moisture-Tightness: Machine-threaded body screws onto an O-ring for a secure, moisture-tight seal.
• UL/cUL 등재: 안전 기준 준수를 보장합니다.

5. 사양

6. 설치

Before beginning installation, ensure the power to your low voltage transformer is turned OFF.

6.1. 전구 설치

1. Carefully remove the top cap of the path light by unscrewing it.
2. Insert a G4 LED bi-pin bulb (sold separately) into the beryllium copper socket. Ensure the pins are fully seated.
3. Replace the top cap, screwing it firmly to ensure a moisture-tight seal.

이미지: 클로즈업 view of the VOLT Stemless Directional Brass Path Light, showing its compact design.

6.2. 장착 옵션

The VOLT Stemless Directional Brass Path Light offers two primary mounting methods:

6.2.1. Ground Stake Installation

1. Thread the path light onto the included 9-inch PVC ground stake.
2. Select a desired location in your landscape. Ensure the location allows for proper drainage and is clear of underground utilities.
3. Push the ground stake firmly into the soil until the path light is at the desired height and stable. For hard soil, pre-dig a small pilot hole.
4. 낮은 볼륨 라우팅tage wire from the path light to your low voltage transformer, ensuring the wire is protected from damage.

6.2.2. 표면 실장

1. Identify the desired surface for mounting (e.g., deck, patio edge).
2. Use the provided mounting hardware to secure the base of the path light to the surface. Pre-drill pilot holes if necessary.
3. Ensure the fixture is securely fastened and stable.
4. 낮은 볼륨 라우팅tage wire from the path light to your low voltage transformer, ensuring the wire is protected from damage.

6.3. Wiring to Transformer

• 저전압을 연결하세요tage wire from the path light to the common and 12V terminals on your low voltag전자 변압기.
• 모든 연결이 단단하고 안전한지 확인하세요.
• Once all fixtures are installed and wired, turn on the power at the transformer.

비디오: 이 비디오는 다음을 제공합니다.view of the VOLT Stemless Brass Bronze Directional Path Light, highlighting its features and demonstrating mounting options. It shows how to attach the light to a ground stake and how to prepare it for surface mounting.

7. 사용 설명서

The VOLT Stemless Directional Brass Path Light operates as part of a low voltage landscape lighting system controlled by a transformer. There are no direct controls on the fixture itself.

• Once properly installed and connected to a low voltage transformer, the light will turn on and off according to the transformer's settings (e.g., timer, photocell).
• Ensure the transformer is set to the desired operating schedule.

8. 유지관리

Regular maintenance will help ensure the longevity and optimal performance of your path light.

• 청소: Periodically clean the fixture and lens with a soft, damp cloth to remove dirt, debris, and mineral deposits. Do not use abrasive cleaners.
• 전구 교체: If the bulb burns out, ensure the power to the transformer is off before replacing the G4 LED bi-pin bulb. Follow the bulb installation steps in Section 6.1.
• 배선 검사: Annually inspect wiring for any signs of damage, fraying, or loose connections. Repair or replace as needed.
• 고정물 안정성: Check that the fixture remains securely mounted, whether on a ground stake or surface. Re-secure if loose.

9. 문제 해결

10. 보증 및 지원

The VOLT Stemless Directional Brass Path Light is backed by a 평생 보증. 본 보증은 정상적인 사용 중에 발생하는 재료 및 제조상의 결함을 보장합니다.

For warranty claims, technical assistance, or any questions regarding your product, please contact VOLT Lighting customer support. Refer to the official VOLT Lighting web최신 연락처 정보는 해당 사이트나 구매 설명서를 참조하세요.

제조업체: 볼트 조명

한국어: 842032134007