1. 중요 안전 지침
Please read all instructions carefully before operating the ultrasonic cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- 전기 안전: Always connect the unit to a grounded outlet. Do not touch the power plug or unit with wet hands. Disconnect from power before servicing or cleaning.
- 수위: Ensure the tank is filled with an appropriate amount of cleaning solution before turning on the heater or ultrasonic function. Never operate the unit dry.
- 온도: The cleaning solution can become hot. Use caution when handling the tank or draining solution.
- 인화성 액체: Do not use flammable, explosive, or corrosive liquids in the tank. Use only recommended cleaning solutions.
- 통풍: 통풍이 좋은 곳에서 작업하세요.
- 어린이와 애완동물: 본 제품을 어린이와 애완동물이 닿지 않는 곳에 보관하세요.
- 분해 : 직접 분해하거나 수리하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
2. 제품 오버view
The Generic 30L Professional Ultrasonic Cleaner is designed for efficient and thorough cleaning of various items using 40kHz ultrasonic waves and a heating function. It features a digital timer and temperature control for precise operation.
Image: The 30L ultrasonic cleaner showing its main components including the stainless steel tank, control panel, lid, and cleaning basket.
주요 특징:
- 강력한 청소: 40kHz ultrasonic frequency and 180W ultrasonic power for effective cleaning.
- 가열 기능: 200W heating power with adjustable temperature up to 80°C (176°F).
- 디지털 제어: Precise digital timer (0-30 minutes) and temperature display.
- 내구성 있는 구조: Premium 304 stainless steel tank with multiple protective layers.
- 안전 기능: Heat dissipation holes, double fuses, and rubber foot pads for stability.
- 편의: Noise reduction lid, convenient handles, and drainage system.
제어판 이상view:
이미지: 상세 view of the digital control panel with numbered labels for each function.
| 아니요. | 기능 | 설명 |
|---|---|---|
| 1 | 온도 표시 | 현재 온도와 설정 온도를 표시합니다. |
| 2 | Temperature Control (+) | 설정 온도를 높입니다. |
| 3 | Temperature Control Switch (ON/OFF) | 난방 기능을 활성화하거나 비활성화합니다. |
| 4 | Temperature Control (-) | 설정온도를 낮춥니다. |
| 5 | 난방 Lamp | Indicates when the heating function is active. |
| 6 | 스위치 라이트 | 전원 상태를 나타냅니다. |
| 7 | Time Control (+) | Increases the set cleaning time. |
| 8 | Time Control Switch (ON/OFF) | 초음파 세척 기능을 활성화하거나 비활성화합니다. |
| 9 | Time Control (-) | Decreases the set cleaning time. |
| 10 | 시간 표시 | Shows the remaining and set cleaning time. |
3. 설정 및 준비
- 짐 풀기: Carefully remove the ultrasonic cleaner from its packaging. Inspect for any damage during transit.
- 놓기: Place the unit on a stable, level, and dry surface. Ensure adequate ventilation around the unit. Keep it away from heat sources and direct sunlight.
- 전원 연결: Ensure the power switch is in the OFF position. Connect the power cord to the unit and then to a grounded electrical outlet.
- 탱크를 채우세요: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the "MIN" and "MAX" marks. Do not overfill or underfill.
- 장바구니에 담기: If using the cleaning basket, place the items to be cleaned inside the basket and then lower the basket into the tank. Ensure items are fully submerged but not touching the bottom of the tank directly.
Image: Illustration of the ultrasonic cleaner with its main accessories: the cleaning basket, lid, and power cord.
4. 사용 설명서
- 전원 켜기: Turn on the main power switch located at the back or side of the unit. The digital display will illuminate.
- 설정 온도(선택 사항):
- Press the "Temp +" or "Temp -" buttons to set the desired cleaning solution temperature. The temperature range is RT (room temperature) to 80°C (176°F).
- Press the "Temp ON/OFF" button to start the heating function. The heating lamp will light up. The unit will heat the solution to the set temperature.
- 청소 시간 설정:
- Press the "Time +" or "Time -" buttons to set the desired cleaning duration. The time range is 0 to 30 minutes.
- For optimal cleaning, consider a pre-soak or longer cleaning time for heavily soiled items.
- 초음파 세척 시작: Press the "Time ON/OFF" button to start the ultrasonic cleaning cycle. The time display will count down.
- During Cleaning: The unit will generate ultrasonic waves, creating cavitation bubbles that dislodge dirt and contaminants. The heating function will maintain the set temperature.
- 사이클 종료: Once the set time expires, the ultrasonic function will automatically stop. The heating function will continue if not manually turned off.
- 항목 제거: Carefully remove the cleaning basket from the tank. Rinse the cleaned items with clean water and dry them thoroughly.
- 전원 끄기 : Turn off the "Temp ON/OFF" and "Time ON/OFF" buttons, then turn off the main power switch.
Image: An illustration depicting the ultrasonic cleaner in operation, with glasses and jewelry submerged in the cleaning solution.
5. 유지관리 및 관리
- 탱크 배수: After each use or when changing the cleaning solution, ensure the unit is powered off and unplugged. Allow the solution to cool if heated. Use the drainage system (valve) to empty the tank.
- 탱크 청소: Rinse the stainless steel tank with clean water. Wipe the interior and exterior with a soft cloth. Do not use abrasive cleaners or harsh chemicals that could damage the surface.
- 외부 청소: 광고로 장치의 외부를 닦습니다.amp 천으로 닦아주세요. 제어판이나 전기 부품에 물이 들어가지 않도록 주의하세요.
- 저장: Store the ultrasonic cleaner in a cool, dry place when not in use. Ensure the tank is empty and dry before storage.
- 정기 검사: Periodically check the power cord for any signs of damage. Ensure the rubber foot pads are intact for stability.
이미지: 측면 view of the ultrasonic cleaner highlighting the brass drainage valve for easy emptying of the tank.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않습니다. | No power supply; Power cord not connected; Main switch off; Blown fuse. | Check power outlet; Ensure power cord is securely connected; Turn on main power switch; Check and replace fuse if necessary (refer to qualified technician). |
| 초음파 기능이 작동하지 않습니다. | "Time ON/OFF" button not pressed; Insufficient water level; Faulty transducer. | Press "Time ON/OFF" button; Ensure water level is between MIN and MAX; Contact customer support if issue persists. |
| 난방 기능이 작동하지 않습니다. | "Temp ON/OFF" button not pressed; Insufficient water level; Faulty heating element. | Press "Temp ON/OFF" button; Ensure water level is between MIN and MAX; Contact customer support if issue persists. |
| 세척 결과가 좋지 않음. | Incorrect cleaning solution; Insufficient cleaning time; Overloaded tank; Items not fully submerged. | Use appropriate cleaning solution for items; Increase cleaning time; Do not overload the tank; Ensure items are fully submerged. |
| 과도한 소음 또는 진동. | Unit not on a stable surface; Tank not properly filled; Items touching tank bottom. | Place unit on a stable, level surface; Ensure proper water level; Use cleaning basket to prevent items from touching the tank bottom. |
7. 제품 사양
| 특징 | 사양 |
|---|---|
| 모델 | 30리터 |
| 용량 | 30리터 |
| 초음파 주파수 | 40kHz |
| 초음파 파워 | 180와트 |
| 가열 전력 | 200와트 |
| 온도 범위 | Room Temperature to 80°C (176°F) |
| 타이머 설정 | 0-30 minutes (Digital) |
| 탱크 소재 | SUS304 스테인리스 스틸 |
| 크기(대략) | 22인치(길이) x 13인치(너비) x 13인치(높이) |
Image: Diagram showing the approximate external dimensions of the 30L ultrasonic cleaner.
8. 보증 및 지원
보증 정보 및 고객 지원은 구매 시 제공된 문서를 참조하거나 판매자에게 직접 문의하십시오. 구매 영수증은 구매 증빙 자료로 보관하십시오.
추가 지원이 필요하면 다음을 방문하세요. Amazon의 일반 매장.
