소개
This manual provides detailed instructions for the setup, operation, and maintenance of your LFF Atomic Clock LWC204-TEMU. This digital wall clock features a large LCD display, atomic time synchronization, indoor and outdoor temperature readings, and date display. Please read this manual thoroughly before using the device to ensure proper function and longevity.
패키지 내용
포장 내용물을 꼼꼼히 확인해 주세요. 누락되었거나 손상된 품목이 있는 경우 고객 지원팀에 문의하세요.
- Clock Unit (Main Display)
- 사용 설명서(본 문서)
- 야외 온도 센서
- 설치용 하드웨어(나사, 벽 앵커)
- Power Adapter (for optional continuous power)
Note: Batteries are not included and must be purchased separately. The main clock unit requires 3x AA batteries, and the outdoor sensor requires 2x AAA batteries.
제품 특징
- Large LCD Digital Display for easy readability
- Atomic Clock (RCC) for precise time synchronization
- Indoor Temperature display (°C/°F)
- Outdoor Temperature display (°C/°F) with wireless sensor
- Date and Weekday display
- Alarm Clock function with snooze
- Daylight Saving Time (DST) symbol
- Supports up to 3 outdoor remote sensors (one included)
- Wireless range of up to 330 feet (100 meters)
제품 끝view
Familiarize yourself with the main display and control buttons of your LFF Atomic Clock.
영상: 앞면과 뒷면 view of the LFF Atomic Clock. The front display shows time, indoor temperature, date, weekday, and outdoor temperature, along with icons for alarm, RCC reception, and DST. The back panel highlights the 'SET', 'ALARM', 'CHANNEL', 'DOWN/WAVE/°C/°F', and 'UP/ALARM' buttons.
디스플레이 요소:
- 시간 표시: 현재 시간(시:분)을 표시합니다.
- PM 지표: Appears for afternoon hours.
- DST Symbol: 일광 절약 시간이 적용 중임을 나타냅니다.
- RCC Reception Icon: Shows status of atomic clock signal reception.
- 알람 시계 아이콘: Indicates alarm is set.
- 실내 온도: Current temperature inside (°C/°F).
- Date/Month/Weekday: 현재 날짜와 요일.
- 야외 온도: Current temperature from the wireless sensor (°C/°F).
제어 버튼(후면 패널):
- 설정 버튼: Enters setup mode for time, date, and other settings.
- 알람 버튼: Activates/deactivates the alarm and enters alarm setting mode.
- 채널 버튼: Switches between outdoor sensor channels (if multiple sensors are used).
- DOWN/WAVE/°C/°F Button: Decreases values during setting, manually initiates atomic signal search (WAVE), and switches temperature units.
- UP/ALARM Button: Increases values during setting, and can also activate/deactivate alarm.
설정
1. 배터리 설치
The clock unit and outdoor sensor require batteries for operation. Ensure correct polarity (+/-) when inserting batteries.
- 메인 시계 장치: Open the battery compartment on the back and insert 3x AA batteries (not included).
- 실외 센서: Open the battery compartment and insert 2x AAA batteries (not included).
영상: This image illustrates the battery requirements for the LFF Atomic Clock. The main clock unit requires three AA batteries, and the wireless outdoor sensor requires two AAA batteries. Batteries are not included with the product.
Alternatively, the main clock unit can be powered continuously using the included power adapter. Insert the adapter into the DC port on the back of the clock.
2. Initial Synchronization (Atomic Clock)
After inserting batteries, the clock will automatically attempt to synchronize with the atomic time signal (RCC). This process may take several minutes to several hours, depending on your location and signal strength. The RCC reception icon will flash during synchronization and become solid when a stable signal is received.
- For best reception, place the clock near a window and away from electronic devices that may cause interference.
- To manually initiate an atomic signal search, press and hold the DOWN/WAVE/°C/°F 버튼을 몇 초간 눌러주세요.
3. 실외 센서 배치
Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and precipitation, to ensure accurate temperature readings. The sensor should be within the 330ft (100m) wireless range of the main clock unit.
영상: This image demonstrates the wireless range and ideal placement for the LFF Atomic Clock's outdoor sensor. The sensor should be placed outdoors, within 330 feet (100 meters) of the main unit, and in a location that allows for clear signal transmission, such as mounted on an exterior wall.
- Ensure the sensor is mounted vertically to allow for proper drainage.
- Avoid placing the sensor near heat sources (e.g., vents, windows) or reflective surfaces that could affect temperature accuracy.
- The clock supports up to 3 outdoor sensors. If using multiple sensors, press the 채널 button on the main unit to cycle through them.
작동 지침
1. 수동 시간 및 날짜 설정
If the atomic clock signal is not available or you prefer to set the time manually:
- 를 누르고 계세요 세트 버튼을 3초 동안 누르면 시간 설정 모드로 들어갑니다. 시 숫자가 깜빡입니다.
- 사용하세요 UP/ALARM or DOWN/WAVE/°C/°F 깜박이는 값을 조정하는 버튼입니다.
- 누르다 세트 again to confirm and move to the next setting (e.g., Minute, Year, Month, Day, Time Zone, 12/24-hour format).
- 모든 설정이 구성될 때까지 2단계와 3단계를 반복합니다.
- 누르다 세트 one last time or wait 15 seconds for the clock to exit setting mode automatically.
2. 알람 설정
- 를 누르세요 경보 버튼을 한 번 누르면 알람 시간이 표시됩니다.
- 를 누르고 계세요 경보 버튼을 3초 동안 누르면 알람 설정 모드로 들어갑니다. 시 숫자가 깜빡입니다.
- 사용하세요 UP/ALARM or DOWN/WAVE/°C/°F 버튼으로 시간을 조정합니다.
- 누르다 경보 again to confirm the hour and move to the minute setting.
- 사용하세요 UP/ALARM or DOWN/WAVE/°C/°F 분을 조정하는 버튼.
- 누르다 경보 알람 설정 모드를 확인하고 종료하려면 마지막으로 한 번 더 클릭하세요.
알람을 활성화 또는 비활성화하려면 버튼을 누르십시오. 경보 button briefly when the current time is displayed. The alarm icon will appear or disappear on the display.
3. 온도 단위 선택(°C/°F)
To switch between Celsius and Fahrenheit for temperature display, press the DOWN/WAVE/°C/°F button briefly during normal time display.
4. 일광 절약 시간제(DST)
The clock is designed to automatically adjust for Daylight Saving Time if the atomic signal is received. A DST icon will appear on the display when DST is active.
5. Large Display Readability
영상: This image highlights the large LCD screen of the LFF Atomic Clock, demonstrating its clear digital display. The large numbers for time, day, date, and temperature are easily readable from a distance, enhancing user convenience.
The LFF Atomic Clock features a large LCD screen with clear digital numbers, designed for easy readability of time, day, date, and temperature from various distances.
유지
- 청소: Wipe the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or chemicals.
- 배터리 교체: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at once with new ones of the same type.
- 저장: 장기간 시계를 보관할 경우 누액을 방지하기 위해 모든 배터리를 제거하십시오.
문제 해결
| 문제 | 가능한 해결책 |
|---|---|
| No display on clock unit. | Check battery installation (polarity, charge). Ensure power adapter is securely connected if used. |
| 시간이 잘못되었거나 동기화가 되지 않습니다. | Ensure the clock is placed near a window, away from interference. Manually initiate atomic signal search (press and hold DOWN/WAVE/°C/°F). Check time zone setting. |
| 실외 온도가 표시되지 않거나 정확하지 않습니다. | Check batteries in the outdoor sensor. Ensure sensor is within range (330ft/100m) and not obstructed. Press 채널 button to re-establish connection. Relocate sensor to a shaded, dry area. |
| 알람이 울리지 않습니다. | Ensure the alarm is activated (alarm icon visible). Check alarm time setting. |
명세서
- 모델 번호: LWC204-TEMU
- 상표: LFF 확장
- 디스플레이 유형: 디지털 LCD
- 전원(주 장치): 3x AA Batteries (not included) or Power Adapter (included)
- 전원(실외 센서): AAA 배터리 2개(포함되지 않음)
- 특징: Alarm, Atomic Time (RCC), Indoor/Outdoor Temperature
- 색상: 검은색
- 제품 크기: 8.7 x 1.5 x 7.5인치(22.1 x 3.8 x 19.1cm)
- 품목 무게: 1.3파운드(0.59kg)
- 무선 범위: 최대 330피트(100미터)
- 한국어: 799849203702
보증 및 지원
LFF products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official LFF web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.