GeeekPi DeskPi Lite Pi5 Case Instruction Manual

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your GeeekPi DeskPi Lite Pi5 Case. Designed specifically for the Raspberry Pi 5, this case enhances functionality with PCIe expansion for M.2 NVMe SSDs, an active cooling system, and convenient connectivity options.

주요 특징:

• 호환성: Specifically designed for the Raspberry Pi 5.
• 확장 성 : Supports PCIex1 expansion for M.2 NVMe SSDs (2230, 2242, 2260, 2280 sizes).
• 고급 냉각: Integrated Armor Lite V5 Active Cooler for optimal thermal management.
• 편리한 연결성: PCB daughter board with MicroHDMI to standard HDMI adapter and rear-routed USB-C port.
• GPIO 접근: Features a GPIO expansion board and dust cover for easy and protected access.
• 전원 관리 : Includes a power switch button and a reset push button for the Pi 5 board.

2. 패키지 내용

아래 나열된 모든 구성품이 패키지에 포함되어 있는지 확인하세요.

• DeskPi Lite Pi5 Case (Top and Bottom Shell)
• DeskPi V1 For RPi5 Daughter Board
• Armor Lite V5 Active Cooler (Aluminum Heatsink with Fan)
• PCIe FPC Cable
• GPIO Expansion Board
• Thermal Pads (various sizes)
• M2x6.5mm Standoff
• M2x3mm 나사
• M2.5x6 나사
• M2.5x10 나사

3. 설정 지침

Follow these steps carefully to assemble your GeeekPi DeskPi Lite Pi5 Case with your Raspberry Pi 5 and M.2 NVMe SSD.

3.1. Heatsink and Thermal Pad Installation

1. Carefully peel off the protective films from both sides of the thermal pads.
2. Apply the thermal pads to the corresponding chips on your Raspberry Pi 5 board as indicated in Figure 3, Step 1. Ensure good contact.
3. Align the Armor Lite V5 Active Cooler with the Raspberry Pi 5 board, ensuring the fan connector is near the fan header. Gently press down to secure it, making sure the thermal pads create firm contact between the heatsink and the chips.
4. Secure the heatsink to the Raspberry Pi 5 board using the provided screws, as shown in Figure 3, Step 2.
5. Connect the fan cable from the Armor Lite V5 Active Cooler to the appropriate fan header on the Raspberry Pi 5 board.

3.2. Daughter Board and PCIe Cable Connection

1. Connect the PCIe FPC cable to the Raspberry Pi 5's PCIe slot and the DeskPi V1 Daughter Board's PCIe slot. Ensure the cable is inserted correctly and securely.
2. Carefully align and connect the Raspberry Pi 5 board to the DeskPi V1 Daughter Board, ensuring all ports and connectors are properly seated. This connection includes the USB-C port and the HDMI ports.
3. Insert the M.2 NVMe SSD into the designated slot on the DeskPi V1 Daughter Board. Secure it with the provided M2x6.5mm standoff and M2x3mm screw. The case supports M.2 NVMe SSDs of sizes 2230, 2242, 2260, and 2280.

3.3. 케이스 조립

1. Place the assembled Raspberry Pi 5 and daughter board into the bottom shell of the DeskPi Lite case. Ensure it sits flush and all ports align with the case openings.
2. Secure the board assembly to the bottom case using the M2.5x6 screws.
3. Attach the GPIO expansion board to the GPIO pins on the Raspberry Pi 5.
4. Place the top shell of the case onto the bottom shell, aligning the screw holes. Secure the top shell with the M2.5x10 screws.

3.4. 비디오 설치 가이드

자세한 단계별 설치 방법은 공식 설치 영상을 참조하십시오.

4. 사용 설명서

Once assembled, the DeskPi Lite Pi5 Case provides enhanced control and monitoring features.

4.1. Power and Reset Buttons

• 전원 스위치 버튼: Located on the side of the case, this button allows for convenient power on/off control of your Raspberry Pi 5.
• 재설정 푸시 버튼: Positioned on the front, this button provides a quick way to reset the Raspberry Pi 5 board.

4.2. LED 표시기

The case features LED indicators to provide status information:

• 녹색 LED : Indicates disk status.
• 적색 LED : 전원 상태를 나타냅니다.

4.3. GPIO Access

The integrated GPIO expansion board allows for easy access to the Raspberry Pi 5's GPIO pins from the outside of the case, protected by a rubber cover.

4.4. MicroSD 카드 슬롯

The MicroSD card slot remains accessible from the outside, allowing for easy insertion and removal of the card without disassembling the case.

5. 유지관리

To ensure the longevity and optimal performance of your DeskPi Lite Pi5 Case and Raspberry Pi 5, follow these maintenance guidelines:

• 청소: Periodically clean the exterior of the case with a soft, dry cloth. For dust accumulation in the ventilation grilles, use compressed air. Ensure the device is powered off and disconnected from power before cleaning.
• 팬 유지 보수: If the active cooler fan becomes noisy or less effective, inspect it for dust buildup and gently clean it with compressed air or a soft brush.
• 환경 조건: Operate the case in a well-ventilated area, away from direct sunlight, excessive heat, and moisture.

6. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.

6.1. SSD가 감지되지 않음

• Check PCIe Cable: Ensure the PCIe FPC cable is securely connected at both ends (Raspberry Pi 5 and daughter board).
• SSD Seating: Verify that the M.2 NVMe SSD is correctly seated in its slot and secured with the screw.
• Raspberry Pi OS Configuration: Ensure your Raspberry Pi OS is updated and configured to recognize NVMe drives. You may need to force PCIe to Gen3.0 in config.txt 추가하여 dtparam=pciex1_gen=3.
• SSD 호환성: Confirm your M.2 NVMe SSD is compatible with the PCIe interface and supported sizes (2230/2242/2260/2280).

6.2. 냉각 성능

• Thermal Pad Contact: Ensure the thermal pads are correctly placed and make firm contact between the Raspberry Pi 5 chips and the heatsink.
• 팬 연결: Verify the active cooler fan is properly connected to the Raspberry Pi 5's fan header.
• 팬 작동 : Note that the fan typically activates when the CPU temperature reaches approximately 65 degrees Celsius. This is normal operation.

6.3. 조립의 어려움

• Ribbon Cables: Be gentle when handling and connecting the FPC ribbon cables. Ensure they are fully inserted and the latches are secured.
• 구성 요소 정렬: Double-check the alignment of the Raspberry Pi 5 board with the daughter board and the case. Do not force components if they do not fit easily.
• Power Button Mechanism: When installing the Raspberry Pi 5, ensure the case's power button mechanism aligns correctly with the Pi's onboard power button to avoid damage.

7. 사양

8. 보증 및 지원

For warranty information and technical support, please refer to the official GeeekPi website or contact their customer service directly. Details regarding warranty periods, coverage, and support channels are typically provided by the manufacturer.

보증 청구를 위해 항상 구매 증빙 서류를 보관하세요.