CYCLAMI A2MAX 150PSI Mini Electric Bicycle Pump User Manual

1. 서론

Thank you for choosing the CYCLAMI A2MAX Mini Electric Bicycle Pump. This compact and portable pump is designed for convenient and efficient tire inflation, featuring a digital pressure gauge and an automatic stop function. It supports both Presta and Schrader valves, making it suitable for a wide range of bicycles, including road and mountain bikes.

Image 1.1: The CYCLAMI A2MAX pump, showcasing its classic design and compact form factor.

Image 1.2: The compact size of the A2MAX pump, easily held in one hand for portability.

2. 상자 안에 무엇이 들어있나요?

모든 품목이 들어 있는지 확인하려면 패키지 내용물을 확인하세요.

• CYCLAMI A2MAX Mini Electric Bicycle Pump
• Type-C 충전 케이블
• 프레 스타 밸브 어댑터
• 슈레이더 밸브 어댑터
• Inflatable Extension Tube (flexible hose)
• 보호용 실리콘 커버

Image 2.1: Included accessories: Presta valve, Schrader valve, protective cover, and inflatable extension tube.

3. 설정

3.1 펌프 충전

Before first use, fully charge the pump. Connect the provided Type-C charging cable to the pump's charging port and to a suitable USB power source. The battery indicator on the digital display will show the charging status. A full charge takes approximately 1.1 hours.

Image 3.1: The pump connected via its Type-C port for charging.

3.2 호스 및 어댑터 연결

1. Screw the inflatable extension tube securely onto the pump's air outlet.
2. Depending on your tire valve type (Presta or Schrader), attach the appropriate adapter to the other end of the extension tube.

3.3 Power On and Unit Selection

1. Press the power button to turn on the pump. The digital display will illuminate.
2. To switch between pressure units (PSI or Bar), press the '+' and '-' buttons simultaneously.

Image 3.2: The digital display screen indicating pneumatic pressure, battery level, and unit selection.

4. 사용 설명서

4.1 Connecting to the Tire

Securely attach the appropriate valve adapter on the extension tube to your tire's valve stem. Ensure a tight connection to prevent air leakage.

4.2 원하는 압력 설정

1. Once connected, the digital display will show the current tire pressure.
2. Use the '+' and '-' buttons to set your desired target pressure. The pump supports a maximum pressure of 150 PSI.

Image 4.1: The pump connected to a tire, displaying the preset pressure and indicating automatic stop when full.

4.3 인플레이션의 시작과 종료

1. Press the power button to start inflation. The pump will begin to inflate the tire.
2. The pump will automatically stop once the preset pressure is reached. You can also manually stop inflation by pressing the power button again.

4.4 중요 참고 사항

• The pump may generate heat during prolonged use. Use the protective silicone cover to handle the pump safely.
• The pump produces a certain level of noise during operation (over 80dB). It is recommended to use it outdoors.

5. 유지관리

• 청소: Wipe the pump with a soft, damp cloth. Do not use harsh chemicals or immerse the pump in water.
• 저장: Store the pump in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the battery is partially charged if storing for extended periods.
• 배터리 관리 : To prolong battery life, avoid fully discharging the pump frequently. Recharge it regularly, even if not in active use.
• 보호 커버: Always use the provided silicone protective cover to prevent scratches and protect against heat during operation.

6. 문제 해결

• 펌프가 작동하지 않음: 배터리가 충전되어 있는지 확인하세요. 전원에 연결한 후 다시 시도해 보세요.
• 펌프가 작동하지 않습니다: Check if the extension tube and valve adapter are securely connected to both the pump and the tire valve. Ensure the desired pressure is set above the current tire pressure.
• 부정확한 압력 판독: Ensure the valve connection is tight. If issues persist, contact customer support.
• 과열: If the pump becomes excessively hot, allow it to cool down before further use. This is normal during prolonged inflation.

7. 사양

Image 7.1: Illustration of the pump's high-performance motor, capable of 150 PSI output.

8. 보증 및 지원

For warranty information or technical support, please refer to the product packaging or contact CYCLAMI customer service directly. Keep your purchase receipt for warranty claims.