suptek ML8 Gas Spring Monitor Arm Stand User Manual

1. 서론

구매해주셔서 감사합니다asing the suptek ML8 Gas Spring Monitor Arm Stand. This manual provides detailed instructions for safe installation, operation, and maintenance of your monitor arm. Please read this manual thoroughly before use and keep it for future reference.

2. 안전 정보

• 조립하기 전에 모든 부품이 있고 손상이 없는지 확인하십시오. 부품이 없거나 결함이 있는 경우 사용하지 마십시오.
• Do not exceed the maximum load capacity of 10KG (22 lbs).
• Ensure your monitor is compatible with VESA standards 50x50mm, 75x75mm, or 100x100mm.
• 조립하는 동안 어린이와 애완 동물을 가까이 두지 마십시오.
• Always use two people for heavy lifting or when attaching the monitor to the arm.
• Adjust gas spring tension 오직 후에 the monitor is mounted. Failure to do so may result in the arm springing up unexpectedly.

3. 패키지 내용

Verify that all components are included in your package. If any parts are missing or damaged, please contact customer service.

The package includes the monitor arm, wooden base, VESA plate, various screws, washers, and Allen wrenches for assembly. A Japanese instruction manual is also provided.

4. 설정 지침

Follow these steps to assemble and install your suptek ML8 monitor arm stand.

4.1. Attach Arm to Base

1. Carefully insert the monitor arm into the designated slot on the wooden base.
2. Secure the arm to the base using the provided screws and Allen wrench. Ensure all screws are tightened securely.
3. Before proceeding, gently push the arm down to release any initial gas spring tension. Remove the velcro strap.

이미지 설명: This image illustrates the gas pressure adjustment mechanism on the monitor arm. It shows how to turn a screw with an Allen wrench to adjust the tension, with '+' and '-' indicators for increasing 또는 감소asing 압력.

4.2. VESA 플레이트를 모니터에 부착합니다.

1. Align the VESA mounting plate with the mounting holes on the back of your monitor.
2. Use the appropriate screws (M4 or M5, depending on your monitor) and washers to secure the VESA plate to the monitor. Tighten firmly but do not overtighten.

4.3. 모니터를 암에 장착하기

1. With assistance, carefully lift the monitor (with the VESA plate attached) and slide it onto the arm's mounting head.
2. Ensure the monitor is securely seated on the arm. Use the provided screw to lock the VESA plate onto the arm's head.

이미지 설명: This image compares the suptek ML8's desk-standing base, which requires no drilling, with traditional clamp-style monitor mounts that may not be suitable for desks with drawers, baffles, or underframes.

The suptek ML8 features a stable wooden base, eliminating the need for drilling holes in your desk or wall. This makes installation simple and suitable for various desk types.

5. 사용 설명서

The ML8 monitor arm offers extensive adjustability for optimal viewing comfort and increased productivity.

5.1. 모니터 위치 조정

• 높이 조정: The gas spring mechanism allows for one-touch stepless height adjustment. Gently push or pull the monitor to your desired height.
• 각도 조정: The innovative multi-axis design allows the screen to be adjusted up 80°, down 80°, left/right 180°, and rotated 360°. This wide range of motion helps reduce eye strain and improves work efficiency.
• 받침: 모니터를 좌우로 최대 180°까지 회전할 수 있습니다.
• 회전: Rotate the monitor 360° for portrait or landscape view주고받음.

이미지 설명: This image highlights the flexibility of the suptek ML8 monitor arm, demonstrating its tilt (±90°), swivel (180°), and rotation (360°) capabilities, along with height adjustment range.

5.2. 케이블 관리

The monitor arm includes a cable guide to help keep your desk tidy and organized. Route your monitor cables through the integrated cable management system along the arm.

이미지 설명: This image displays the monitor arm with cables neatly routed through its integrated cable management system, contributing to a clean and organized workspace.

5.3. Device Storage Slot

The wooden base features a multi-functional slot designed to hold smartphones, tablets, pens, or sticky notes. This helps keep your workspace clear and your devices conveniently accessible.

이미지 설명: This image illustrates the multi-functional slot on the wooden base of the monitor arm, designed to hold small devices like smartphones or tablets, keeping them organized on the desk.

6. 유지관리

• 청소: The wooden base is water-resistant. In case of spills, simply wipe with a soft, damp 옷감. 연마성 세제를 피하십시오.
• 점검: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
• 가스 스프링: The gas spring is designed for long-term use and generally requires no maintenance. If you notice a change in tension, refer to the gas pressure adjustment section in troubleshooting.

7. 문제 해결

7.1. Monitor Does Not Stay in Desired Position (Gas Pressure Adjustment)

The gas spring tension needs to be adjusted to match the weight of your monitor. This adjustment should only be performed ~ 후에 the monitor is mounted.

1. After hanging the monitor, push the monitor down with one hand until the arm is horizontal.
2. If the monitor sags or falls: Turn the screw (located on the arm, as shown in the setup image) counter-clockwise (in the + direction) little by little to increase tension.
3. If the monitor rises or springs up: Turn the screw clockwise (in the - direction) little by little to decrease tension.
4. 모니터를 놓았을 때 제자리에 고정될 때까지 점진적으로 조정하세요.

7.2. 누락된 부품

If any necessary parts are missing from your package, please contact customer service immediately for assistance.

8. 사양

이미지 설명: This image provides key specifications including weight capacity (22 lbs), compatible screen sizes (17-32 inches), VESA compatibility (75x75mm, 100x100mm), and base dimensions (33cm width, 53.5cm length).

9. 보증 및 지원

The suptek ML8 Gas Spring Monitor Arm Stand comes with a 1년 보증 구매일로부터.

For warranty claims, technical support, or if you have any questions regarding your product, please contact suptek customer service through the retailer where you purchased the product or visit the official suptek web연락처 정보 사이트.