HPBS 5000A 타이어 공기 주입기 및 3000A 차량 점프 스타터 사용 설명서

소개

Thank you for choosing the HPBS 5000A Tire Inflator and 3000A Car Jump Starter. This comprehensive device is designed to provide reliable roadside assistance for various vehicles, combining the essential functions of a powerful jump starter, a precise tire inflator, an LED flashlight, and a portable power bank. Please read this manual thoroughly before operating the device to ensure safe and efficient use.

Image: The HPBS 5000A Tire Inflator (right) and 3000A Car Jump Starter (left) shown together, highlighting their compact design.

안전 정보

부상이나 기기 및 차량 손상을 방지하기 위해 항상 다음 안전 수칙을 준수하십시오.

• 기기를 어린이의 손이 닿지 않는 곳에 보관하세요.
• 기기를 비나 극한 온도에 노출시키지 마십시오.
• 작동 및 충전 중에는 적절한 환기가 이루어지도록 하십시오.
• 장치를 분해하거나 개조하지 마십시오.
• 제공된 액세서리와 케이블만 사용하십시오.
• 점프 스타터 회로의 단락을 피하십시오.amps.
• Wear eye protection when operating the jump starter.
• 타이어에 공기를 과도하게 주입하지 마십시오. 항상 차량 제조사에서 권장하는 타이어 공기압을 확인하십시오.

Image: Visual representation of the 10 built-in safety protections, including spark resistance, over-charge, over-current, short-circuit, over-heat, extreme temperature, over-voltag역방향 연결, 역극성 및 과방전 보호 기능이 있습니다.

제품 끝view

구성 요소 및 기능

The HPBS 5000A Tire Inflator and 3000A Car Jump Starter are designed for versatility and ease of use.

3000A 자동차 점프 스타터

• EC5 Output Port: For connecting smart jump cables.
• 켜기/끄기 버튼: 장치에 전원을 공급합니다.
• LED 손전등: 일반, 스트로보, SOS 모드로 조명을 제공합니다.
• USB Output Ports (USB1, USB2): 외부 장치를 충전하는 데 사용됩니다.
• USB-C 입력 포트: 점프 스타터 장치를 충전합니다.
• 표시등: Show battery level and status.
• 디지털 디스플레이: 배터리 비율을 표시합니다.tage.

이미지: 클로즈업 view of the 3000A Jump Starter, labeling the EC5 Output Port, ON/OFF Button, LED Flashlight, USB Output 1, USB-C Input, USB Output 2, and Indicator Lights.

5000A Tire Inflator

• Inflator Interface: 에어호스를 연결하기 위한 것입니다.
• Star Output Port: (Likely a DC output for specific accessories, or mislabeled from jump starter)
• 디스플레이 화면: Shows current pressure, target pressure, and unit.
• Preset Air Pressure Plus Key (+): 목표 압력을 증가시킵니다.
• Mode/Unit Switching Button: Toggles between PSI, KPA, BAR, Kg/cm² and preset modes (car, motorcycle, bicycle, ball).
• Power Supply/Inflation Start Button: Initiates or stops inflation.
• 조명 버튼: LED 조명을 <binary data, 5 bytes>니다.
• Preset Air Pressure Key Reduction (-): 목표 압력을 감소시킵니다.
• LED 조명: Built-in light for visibility.
• USB 출력 포트: 외부 장치를 충전하는 데 사용됩니다.
• C형 입력 포트: For charging the inflator unit.

이미지: 클로즈업 view of the 5000A Tire Inflator, labeling the display screen, preset air pressure keys, mode/unit button, power/inflation button, lighting button, LED lighting, USB output port, Type-C input port, inflator interface, and star output port.

설정

초기 충전

Before first use, fully charge both the 5000A Tire Inflator and the 3000A Car Jump Starter.

1. Connect the provided USB-C charging cable to the Type-C Input Port on each device.
2. 케이블의 다른 쪽 끝을 USB 벽면 어댑터(별도 구매) 또는 전원이 공급되는 USB 포트에 연결하십시오.
3. The digital display on each device will indicate the charging status. Charge until the display shows 100%.

It is recommended to fully charge the devices every 3-6 months, even when not in use, to maintain battery health.

작동 지침

Using the 3000A Car Jump Starter

This jump starter is designed to safely start vehicles with dead batteries.

1. 점프 스타터가 최소 50% 이상 충전되어 있는지 확인하십시오.
2. Connect the smart jump cable's blue end into the EC5 Output Port of the jump starter.
3. 빨간색 cl을 연결하세요amp 차량 배터리의 양극(+) 단자에 연결합니다.
4. 검은색 cl을 연결하세요amp 차량 배터리의 음극(-) 단자에 연결합니다.
5. CL을 확인amps are securely attached and there is no corrosion.
6. 차량의 엔진을 시동하세요.
7. 엔진이 시동되면 즉시 cl을 제거하십시오.amps from the vehicle battery, first the black (-) clamp, 그러면 빨간색 (+) clamp.
8. Disconnect the smart jump cable from the jump starter.

중요한: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive starts.

Image: The HPBS 3000A Jump Starter connected to a car battery with its red and black clamps, demonstrating its use for jump-starting a vehicle.

Image: The HPBS 3000A Jump Starter connected to a car battery, illustrating its capability to jump-start various vehicle types including vans, pick-ups, SUVs, motorboats, motorcycles, and lawn mowers.

Using the 5000A Tire Inflator

Inflate tires and other inflatables with precision.

1. Connect the air hose to the Inflator Interface on the device.
2. Screw the air hose nozzle onto the tire valve stem.
3. Press the Mode/Unit Switching Button to select the desired unit (PSI, KPA, BAR, Kg/cm²) and preset mode (car, motorcycle, bicycle, ball).
4. Use the Preset Air Pressure Plus (+) and Minus (-) keys to set the target pressure. Refer to your vehicle's manual or door jamb sticker for recommended tire pressure.
5. Press the Power Supply/Inflation Start Button to begin inflation. The device will automatically stop when the target pressure is reached.
6. Unscrew the air hose nozzle from the tire valve stem and disconnect the hose from the inflator.

Image: The HPBS 5000A Tire Inflator connected to a car tire, demonstrating its cordless operation and pressure detection capability.

Using the LED Flashlight (Both Devices)

Both the jump starter and tire inflator feature an integrated LED flashlight.

• On the 3000A Jump Starter, press and hold the ON/OFF button to activate the flashlight. Press again to cycle through Normal, Strobe, and SOS modes. Press and hold to turn off.
• On the 5000A Tire Inflator, press the Lighting Button to activate the flashlight. Press again to cycle through modes (if applicable). Press again to turn off.

Using as a Portable Power Bank (Both Devices)

Both devices can charge your electronic gadgets.

• Connect your device's USB charging cable to one of the USB Output Ports on the jump starter or tire inflator.
• 기기가 자동으로 충전을 시작합니다.

Image: The HPBS 3000A Jump Starter functioning as a 74WH portable power bank, charging a mobile phone and a tablet simultaneously.

유지

• 청소: 부드럽고 마른 천으로 기기를 닦으십시오. 독한 화학 약품이나 연마성 세척제를 사용하지 마십시오.
• 저장: 기기를 서늘하고 건조한 곳에 보관하고 직사광선과 극한 온도 변화를 피하십시오.
• 충전 중: Recharge the devices every 3-6 months to maintain battery life, even if not used.
• 케이블 관리: 케이블과 cl을 검사하세요amps for damage before each use. Replace if frayed or damaged.

문제 해결

명세서

• 상표: HPBS
• 모델 번호: 4726f0d1-c453-4aaa-b8f1-1288963ca631
• Jump Starter Peak Current: 3000A
• Tire Inflator Pressure: 최대 150 PSI
• 배터리 용량: Approx. 74WH (for power bank function)
• 입력: USB-C
• 산출: USB-A (for charging devices), EC5 (for jump starting)
• 차량 서비스 유형: 자동차
• 첫 이용 가능 날짜: 21년 2024월 XNUMX일

보증 및 지원

For warranty information and technical support, please refer to the product packaging or contact HPBS customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official HPBS store on Amazon: HPBS Store