Do you have to remove all bedding materials to clean the mattress with the FEPPO LW-P1012 Mattress Vacuum Cleaner?

For the most effective deep cleaning with the FEPPO LW-P1012, it is recommended to remove sheets and bedding materials so the device can make direct contact with the mattress surface. This ensures that the UV-C light, 140°F hot air, and ultrasonic waves can penetrate the mattress layers most efficiently.Key reasons to clean the mattress surface directly include:UV-C Activation: The vacuum uses gravity-sensing wheels that require the unit to be flat against a surface to activate the UV-C sterilization light.Heat Penetration: The 140°F hot air drying feature is designed to reduce moisture and odors within the fabric layers of the mattress itself.Suction Efficiency: Direct contact allows the 16kPa suction and 30,000 RPM tapping to better dislodge fine dust and skin flakes from the mattress fibers.Note: While you can use the vacuum on flat fabric surfaces like sofas or cribs, the manual specifies it is not suitable for use on long velvet or long fluff carpets, as these can entangle the roller brush.

페포 LW-P1012

FEPPO Mattress Vacuum Cleaner Model LW-P1012 User Manual

Model: LW-P1012 | Brand: FEPPO

1. 서론

This manual provides instructions for the safe and effective operation and maintenance of your FEPPO Mattress Vacuum Cleaner, Model LW-P1012. This appliance is designed for deep cleaning of mattresses, sofas, cribs, and other flat fabric surfaces, utilizing powerful suction, UV-C light, heat, and ultrasonic technology.

2. 안전 지침

사용하기 전에 모든 지침을 읽으세요.
이 제품은 실내에서만 사용하세요.
제품을 물이나 다른 액체에 담그지 마십시오.
기기를 어린이의 손이 닿지 않는 곳에 보관하세요.
전원 코드가 손상되지 않았는지 확인하십시오. 손상된 코드나 플러그가 있는 상태로는 작동하지 마십시오.
The UV-C light automatically activates when the unit is in contact with a surface and deactivates when lifted or tilted to prevent UV exposure. Do not attempt to bypass this safety feature.
The roller brush features locking rotor protection; it will stop if entangled.
The unit includes over-voltage, over-current, over-heating, and short-circuit protection. If the motor overheats during prolonged use, the unit will temporarily shut down. Allow it to cool before resuming operation.
Not suitable for absorbing pet hair or for use on long velvet/long fluff carpets.
평평한 표면에만 사용하세요.

3. 제품 구성품

The FEPPO Mattress Vacuum Cleaner comes with the following components:

FEPPO Mattress Vacuum Cleaner Unit
사용 설명서 (본 문서)
HEPA 필터(사전 설치)
Dual Dust Cup
Stainless Steel Filter (part of the filtration system)
롤러 브러시(사전 설치됨)

Figure 3.1: FEPPO Mattress Vacuum Cleaner main unit. The image displays the vacuum cleaner from an angled top-down view, highlighting its transparent dust cup, purple accents, and the base with a green light indicating operation.

FEPPO Mattress Vacuum Cleaner components diagram — Figure 3.2: Diagram of the FEPPO Mattress Vacuum Cleaner's main parts. This image shows an exploded view of the vacuum cleaner, labeling the Power Button, Dust Cup Release Button, Stainless Steel Filter, HEPA Filter, Dust Cup, UV Sterilization Lamp, and Ultrasonic Emission Port.

4. 설정

짐 풀기: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 나중에 보관하거나 운반할 수 있도록 포장을 보관하세요.
필터 설치 : Ensure the HEPA filter and stainless steel filter are correctly seated within the dual dust cup. The dust cup should be securely attached to the main unit.
전원 연결: 전원 코드를 적절한 콘센트에 꽂으십시오. 본 제품은 유선 제품이므로 작동 중에는 지속적인 전원 공급이 필요합니다.

5. 사용 설명서

5.1 일반 작업

전원 켜기: Press the Power Button located on the handle to turn on the vacuum cleaner.
Surface Contact: Place the vacuum cleaner flat onto the surface you wish to clean (e.g., mattress, sofa, crib). The UV-C light will automatically activate upon contact.
청소 동작: Move the vacuum cleaner slowly and steadily across the surface. The powerful 16kPa suction, 30,000 RPM tapping, 140°F hot air, and 40,000Hz ultrasonic waves will work together to deep clean.
전원 끄기 : 전원 버튼을 다시 눌러 기기를 끕니다.

5.2 작동의 주요 특징

UV-C Light & Ultrasonic Waves: The 253.7nm UV-C light and 40,000Hz ultrasonic waves are designed to penetrate fabric layers for deep cleaning. The gravity-sensing wheels ensure the UV-C light only operates when the unit is flat on a surface, preventing accidental exposure.
140°F Hot Air Drying: The integrated hot air function helps to reduce moisture and odors within fabrics, contributing to a fresher environment.
고효율 흡입: The 500W motor provides 16kPa suction and high-frequency tapping to dislodge and remove fine dust and skin flakes.

FEPPO Mattress Vacuum Cleaner demonstrating 16Kpa powerful suction — Figure 5.1: Illustration of the vacuum cleaner's powerful suction and multi-feature cleaning. The image highlights 16Kpa powerful suction, 30,000Rpm/min tapping, 500W stable power, 253.7nm UV-C wavelength, 140°F hot air drying, 3.8LB light weight, and 40,000Hz ultrasonic waves, with an animated depiction of particles being lifted from a mattress.

FEPPO Mattress Vacuum Cleaner UV-C light and ultrasound in action — Figure 5.2: Depiction of the 253.7nm UV-C light and ultrasound technology. The image shows the vacuum cleaner emitting purple light and ultrasonic waves into a fabric surface, with an inset demonstrating the UV light's automatic on/off function based on contact with the surface.

FEPPO Mattress Vacuum Cleaner 140°F hot air function — Figure 5.3: Illustration of the 140°F hot air drying feature. The image shows the vacuum cleaner on a mattress, with arrows indicating hot air penetrating deep into the layers, and a note about overheat protection.

6. 유지관리

6.1 먼지통 비우기 및 청소

먼지통을 분리하세요: Press the Dust Cup Release Button to detach the dual dust cup from the main unit.
빈 내용: Open the dust cup lid and pour the collected dust and debris into a trash receptacle.
필터 청소: Remove the HEPA filter and stainless steel filter from the dust cup. Rinse the dust cup, HEPA filter, and stainless steel filter under running water. Ensure all components are completely dry before reassembling.
재조립: Once dry, reinsert the filters into the dust cup and securely attach the dust cup back onto the main unit.

6.2 롤러 브러시 청소

Unlock Cover: Locate the knob on the underside of the vacuum cleaner. Rotate it to unlock the roller brush cover.
Remove Brushroll: Carefully remove the brushroll.
브러시롤 청소: Remove any entangled hair or debris from the brushroll. The brushroll can be rinsed with water.
재설치: Ensure the brushroll is completely dry before reinserting it and securing the cover by rotating the knob.

FEPPO Mattress Vacuum Cleaner easy disassembly and cleaning steps — Figure 6.1: Step-by-step guide for disassembling and cleaning the vacuum cleaner. The image illustrates pressing a button to unlock the dust cup, pouring out dust, rotating a knob to remove the brushroll, and rinsing detachable accessories under water.

7. 문제 해결

문제	가능한 원인	해결책
진공이 켜지지 않습니다.	전원 공급 없음; 전원 버튼이 눌리지 않았습니다.	Check power cord connection; Press the Power Button firmly.
흡입력 감소.	Dust cup full; Filters clogged; Obstruction in nozzle/brushroll.	Empty and clean the dust cup; Clean or replace filters; Remove any obstructions from the nozzle or brushroll.
UV-C 광선이 활성화되지 않습니다.	Vacuum not placed flat on surface; Safety mechanism engaged.	Ensure the vacuum is placed flat on the cleaning surface so gravity-sensing wheels activate the light.
작동 중 진공이 멈춥니다.	Motor overheating protection activated; Roller brush entangled.	Turn off the unit and allow it to cool for at least 30 minutes; Check and clean the roller brush for entanglement.

8. 사양

상표: 페포
모델 이름: LW-P1012
폼 팩터: 핸드헬드
색상: Violetgrey
특징: 유선
필터 유형: HEPA 필터
왓tage: 500 와트
최대 흡입: 16k파스칼
UV-C 파장: 253.7nm
열 기능: 140°F Hot Air
초음파 주파수: 40,000Hz
더스트컵 용량: 0.5리터
품목 무게: 3.8파운드
제품 크기: 11.9인치 길이 x 9.84인치 너비 x 7.67인치 높이
컨트롤러 유형 : 푸시 버튼
제어 방법: 만지다
실내/실외 사용: 실내
한국어: 717331877408

9. 보증 및 지원

Specific warranty information is not provided in the product details. For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the official FEPPO web대지.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.