MOUNTUP Single Monitor Desk Mount (Model B0DNJ321JD) Instruction Manual

소개

Thank you for choosing the MOUNTUP Single Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. This mount is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor.

Figure 1: Extended reach of the MOUNTUP Single Monitor Arm, offering up to 27.7 inches of extension and 17 inches of height from the desk surface.

명세서

The MOUNTUP Single Monitor Desk Mount is built with high-quality alloy steel to ensure durability and stability. Please review the following specifications to ensure compatibility with your monitor and desk setup.

그림 2: 호환성view for monitor size, VESA patterns, and weight capacity.

설치 지침

Carefully follow these steps to install your MOUNTUP Single Monitor Desk Mount.

1. 설치 방법을 선택하세요

The monitor arm supports two installation methods: C-Clamp and Grommet Mount. Select the method suitable for your desk.

Figure 3: Two available installation methods: C-Clamp for desk thickness 0.39"-3.15" and Grommet Mount for desk thickness 0.39"-1.97" with hole diameter 0.39"-2.36".

C-Clamp 설치:

1. C-cl을 부착하세요amp 받침대를 책상 가장자리에 대십시오. 책상 두께가 0.39인치에서 3.15인치 사이인지 확인하십시오.
2. cl을 조여주세요amp screws securely until the base is stable.

그로밋 마운트 설치:

1. Insert the grommet base through an existing desk hole. Ensure desk thickness is between 0.39" and 1.97" and hole diameter is between 0.39" and 2.36".
2. Secure the base from underneath the desk using the provided hardware.

2. Assemble the Arm and Attach Monitor

1. Slide the main pole onto the installed base and secure it.
2. Attach the monitor arm to the main pole at your desired initial height.
3. Attach the VESA plate to the back of your monitor using the appropriate screws. This mount supports VESA patterns 75x75mm and 100x100mm.
4. Slide the monitor (with VESA plate attached) onto the arm's mounting head until it clicks into place.

작동 지침

The MOUNTUP Single Monitor Desk Mount offers extensive adjustability for optimal view편안함을.

모니터 설정:

• 높이 조정: The arm allows for up to 28.5 inches of vertical adjustment. Gently push or pull the monitor to raise or lower it.
• 확장/수축: Extend the arm up to 27.7 inches or retract it closer to the pole to find your ideal view잉 거리.
• 경사: Tilt your monitor +90°/-90° to reduce glare and optimize your view잉 각도.
• 받침: Swivel the monitor +90°/-90° to share your screen with others or adjust for different tasks.
• 회전: Rotate your monitor +180°/-180° to switch between landscape and portrait orientations. Note that some force may be required for rotation, which is normal for secure positioning.

Figure 4: Full motion capabilities of the monitor arm for ergonomic positioning.

Figure 5: Visual representation of the monitor's adjustable angles.

Gas Spring Tension Adjustment:

The gas spring mechanism allows for smooth and stable height adjustments. You may need to adjust the tension based on your monitor's weight.

1. Ensure the arm is in a horizontal position before adjustment.
2. Locate the tension adjustment screw on the arm (often marked with '+' and '-' symbols).
3. 제공된 육각 렌치를 사용하여 나사를 돌리십시오.
• 회전하다 clockwise ('-') 에게 긴장을 완화하다 for lighter monitors (monitor raises up easily).
• 회전하다 counter-clockwise ('+') 에게 긴장을 높이다 for heavier monitors (monitor drops down easily).
4. Adjust gradually until the monitor stays at your desired height without drifting up or down.

Figure 6: Gas spring tension adjustment for optimal monitor stability.

유지

Regular maintenance ensures the longevity and optimal performance of your MOUNTUP monitor arm.

• 청소: Wipe down the arm and base with a soft, damp 옷감. 마감재를 손상시킬 수 있는 연마성 세제는 사용하지 마십시오.
• 견고성 확인: Periodically check all screws and connections to ensure they are secure. Re-tighten if necessary.
• 가스 스프링: The gas spring is designed for long-term use, tested for over 20,000 lifts. If you notice a change in the arm's ability to hold position, refer to the "Gas Spring Tension Adjustment" section.

Figure 7: The durable gas spring arm is tested for over 20,000 lifts.

케이블 관리 :

Utilize the integrated cable management system to keep your workspace tidy.

• Route monitor cables through the clips or channels along the arm to prevent clutter.
• 케이블에 충분한 여유를 두어 장력 없이 완전한 동작 범위를 확보하십시오.

Figure 8: Integrated cable management and convenient tool storage help maintain a clean desk.

문제 해결

If you encounter any issues with your monitor arm, please refer to the following common solutions:

• Monitor does not stay at desired height or drifts: This indicates incorrect gas spring tension. Adjust the tension screw as described in the "Gas Spring Tension Adjustment" section under Operating Instructions. Increase tension for heavier monitors, decrease for lighter ones.
• 팔이 뻣뻣하거나 움직이기 어렵습니다. The joints may be too tight. Loosen the relevant screws at the arm joints slightly. For monitor rotation, applying a bit of force is normal, and a cracking sound might occur, which is part of the design for secure positioning.
• 모니터가 흔들립니다: Ensure all mounting screws (desk clamp/grommet and VESA plate) are securely tightened. Check that the monitor's weight is within the specified range (4.4-19.8 lbs).
• 부품 누락 또는 손상된 부품: Do not attempt to assemble or use the product. Contact MOUNTUP customer support immediately for assistance.

보증 정보

The MOUNTUP Single Monitor Desk Mount (Model B0DNJ321JD) comes with a 3년 보증 구매일로부터 유효합니다. 본 보증은 정상적인 사용 조건에서 발생하는 제조상의 결함 및 재료상의 하자에 적용됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.

고객 지원

For further assistance, technical support, or warranty inquiries, please contact MOUNTUP customer service through the retailer's platform or the official MOUNTUP website. Our support team is available to help you with any questions or concerns regarding your product.