1. 서론
This manual provides essential information for the installation, operation, and maintenance of your OEMIRY UV Reverse Osmosis System. This tankless 500 GPD system is designed to provide purified, alkaline remineralized water for household use, featuring an 8-stage filtration process and UV sterilization. Please read this manual thoroughly before installation and operation to ensure proper function and longevity of your system.
이미지 1.1: 이상view of the OEMIRY UV Reverse Osmosis System OM-ROF03.
2. 중요한 안전주의 사항
- The system requires a power supply with an input voltage of 120V-240V. Ensure a suitable electrical socket is available under your kitchen sink.
- Operating Temperature: Maintain water temperature between 41-100°F (5-38℃).
- Operating Pressure: Ensure water pressure is between 14.5-87 psi (100-600 kPa).
- Keep the provided wrench for future filter replacements.
- 모든 연결 부분이 안전하게 되어 누출을 방지하세요.
3. 패키지 내용
패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- Water Filter System (main unit)
- 수도꼭지
- 설치 키트
- 전원 케이블
- 사용자 설명서
- Cartridges (4 total: PP, CTO, RO, ALK)
- Quick-connector (1)
- 렌치 (1)
- Lock Clip (6)
- 1/4" PE Tubing (1)
- Teflon Tape (1)
- 나사 (2)
- Quick-connect Tubing Wrench (1)
- 어댑터(1)
4. 설치 가이드
The OEMIRY UV Reverse Osmosis System is designed for under-sink installation. Ensure adequate space and necessary connections are available.
4.1 공간 요구 사항
The system dimensions are 16.7'' (Depth) x 5.1'' (Width) x 15.7'' (Height). Allow at least 5 inches of clearance around the unit for water pipe connections and maintenance.
4.2 연결 지점
The system has three water outlets: an inlet, a purified water outlet, and a wastewater outlet. Ensure a sewage outlet and appropriate tools for connecting the sewage pipe are available under the sink.
Image 4.1: Typical under-sink installation setup.
4.3 General Installation Steps (Refer to detailed manual for specifics)
- 냉수 공급을 차단하십시오.
- Install the feed water adapter to the cold water line.
- Drill a hole for the faucet and install the purified water faucet.
- Install the drain saddle valve to the drain pipe.
- Connect the tubing from the feed water adapter, faucet, and drain saddle to the main RO unit.
- Insert the filter cartridges into their respective housings.
- 전원 케이블을 꽂습니다.
- Turn on the cold water supply and check for leaks.
Image 4.2: Water flow diagram for purification and waste.
5. 사용 설명서
The OEMIRY UV Reverse Osmosis System operates automatically based on water pressure. The tankless design ensures fresh, clean water on demand without storage.
5.1 초기 세척
After installation, allow the system to run for approximately 15-30 minutes to flush out any carbon fines and air from the new filters. Discard this initial water.
5.2 매일 사용
Simply open the dedicated purified water faucet to dispense water. The system will activate automatically to produce purified water. The 500 GPD capacity provides a flow rate of 0.26 GPM, sufficient for daily household needs.
Image 5.1: Applications of purified water from the system.
6. 필터 유지 관리
Regular filter replacement is crucial for maintaining water quality and system performance. The OEMIRY system features 5-grade stainless steel filter housings, requiring only the internal filter elements to be replaced.
6.1 여과 Stages and Replacement Schedule
The system utilizes an 8-stage effective filtration process, including UV sterilization. The filter elements and their approximate service lives are:
- PP Melt Blown Sediment Filter: 6-8개월
- CTO Activated Carbon Block Filter: 12개월
- RO Reverse Osmosis Membrane Filter: 12-24개월
- ALK Alkaline Filter: 12개월
Note: Actual filter life may vary based on local water conditions and usage.
이미지 6.1: 8-Stage Filtration Diagram with UV Sterilization.
6.2 필터 교체 절차
- Turn off the water supply to the system and unplug the power cord.
- Use the provided wrench to unscrew the filter housings.
- 사용하던 필터 카트리지를 제거하고 적절하게 폐기하십시오.
- Insert new filter cartridges into their respective housings, ensuring correct orientation.
- Screw the filter housings back on securely, hand-tightening first, then using the wrench for a final snug fit.
- Turn on the water supply and plug in the power cord. Check for leaks.
- Flush the system for 15-30 minutes before consuming water.
PP필터
CTO 필터
RO 필터
ALK Filter
Image 6.2: Individual filter cartridges for replacement.
7. 문제 해결
이 섹션에서는 역삼투압 시스템에서 발생할 수 있는 일반적인 문제에 대해 설명합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 수도꼭지의 낮은 물 흐름 | 필터 막힘, 유입수 수압 저하, 배관 꼬임. | Check filter replacement schedule; ensure adequate incoming water pressure; inspect tubing for kinks. |
| 물 누출 | 느슨한 연결, 손상된 O-링, 균열된 하우징. | Tighten all connections; inspect and replace O-rings if damaged; contact customer support if housing is cracked. |
| 특이한 맛이나 냄새 | Expired carbon filters, new system flush incomplete. | Replace carbon filters (CTO); ensure initial system flush was completed for at least 15-30 minutes. |
| 시스템이 켜지지 않습니다 | 전원이 안 들어옵니다. 전원 어댑터가 고장났습니다. | Check power connection and wall outlet; ensure power adapter is functioning. |
8. 제품 사양
- 모델 번호: OM-ROF03
- 상표: OEMIRY
- 재료: 스테인리스 스틸
- 제품 크기: 16.7인치 깊이 x 5.1인치 너비 x 15.7인치 높이
- 여과 Stag에스: 8 (including UV sterilization)
- Purified Water Production: 하루 500갤런(GPD)
- 순수 오일 대 배수 비율: 2시 1분
- 작동 온도: 41-100°F / 5-38℃
- 작동 압력: 14.5-87psi / 100-600kPa
- 전원 입력: 120V-240V
- 제품의 장점: Reduces Aluminum, Chlorine, Sediment, Dust, Odor, Fluoride, Nitrates/Nitrites, PFAS/PFOA/PFOS, Lead, Arsenic, Microplastics, Chloride. Enhances taste and remineralizes water with Calcium, Magnesium, Potassium.
Image 8.1: Contaminants effectively filtered by the system.
Image 8.2: Benefits of 304 Stainless Steel construction.
9. 보증 및 고객 지원
For warranty information, technical assistance, or to purchase replacement filters, please contact OEMIRY customer support. Refer to the contact details provided with your product packaging or visit the official OEMIRY web대지.
