Feit Electric 2ft LED T8 Linear Tube Light User Manual

소개

Thank you for choosing the Feit Electric 2ft LED T8 Linear Tube Light. This manual provides important information regarding the installation, operation, and maintenance of your new LED tube lights. These 10-watt (20-watt equivalent) direct replacement (Type A) non-dimmable linear LED tubes are designed to replace F17T8, T8, F20T12, or T12 fluorescent and LED tubes. They are engineered for quick and easy plug-and-play installation with most existing magnetic and electronic ballasts, requiring no rewiring. Each tube delivers 800 lumens of 4000K Cool White light, offering significant energy savings and a long lifespan of up to 50,000 hours.

안전 정보

Please read and understand all safety instructions before installation or use. Failure to do so may result in electric shock, fire, or other injuries.

• 경고: Risk of shock. Disconnect power at the source before installation, inspection, or removal.
• Do not install this product in a pre-heat luminaire with non-shunted bi-pin lamp 홀더.
• 이 lamp operates only on electronic or magnetic ballasts. If the lamp does not light when installed in the luminaire, remove the lamp 등기구에서 l 연락amp 제조업체 또는 자격을 갖춘 전기 기술자.
• 이 장치는 비상구에 사용하기에 적합하지 않습니다.
• Do not use with dimmers. This product is non-dimmable.
• 작동중인 LED 튜브를 직접 보지 마십시오.
• 고정 장치가 적절하게 접지되었는지 확인하십시오.
• Do not modify the tube or its components.
• d에 적합amp 위치.
• Mercury-free and shatter-resistant coating for safe disposal.

제품 끝view

The Feit Electric LED T8 Linear Tube Light is designed for efficient and long-lasting illumination. It features a G13 base for easy plug-and-play installation into compatible fixtures.

Image: A pack of twelve Feit Electric 2ft LED T8 Linear Tube Lights, showcasin균일한 디자인과 수량.

Image: A detailed diagram illustrating the 2ft length and 1-inch diameter of the LED tube, along with key specifications such as 800 lumens brightness, 4000K Cool White light color, 50,000 hours life, 10 watts power consumption, and G13 base code.

주요 특징:

• 에너지 효율성: 10W power consumption, equivalent to 20W fluorescent tubes.
• 밝은 조명: 800 lumens of light output.
• 차가운 백색광: 4000K color temperature for a balanced, neutral white light.
• 긴 수명: 최대 50,000시간 작동.
• Direct Replacement (Type A): Works with most existing magnetic and electronic ballasts.
• 즉시 켜짐: No warm-up time, flicker-free illumination.
• 안전한: Mercury-free with a shatter-resistant coating.

설정 및 설치

These LED tubes are designed for simple plug-and-play installation into existing fluorescent fixtures with compatible ballasts. No rewiring is necessary.

1. 1단계: 전원을 차단하십시오. Before beginning installation, ensure the power to the fixture is turned off at the circuit breaker or fuse box. This is a critical safety step.
2. Step 2: Remove Existing Fluorescent Tubes. Carefully remove the old fluorescent tubes from the fixture. Allow them to cool if they have been recently in use.
3. Step 3: Insert LED Tube. Align the G13 pins of the Feit Electric LED tube with the lamp holders in the fixture. Gently push and twist the tube until it is securely seated. Ensure both ends are properly connected.

Image: A close-up of hands installing a Feit Electric LED tube light into a ceiling fixture, demonstrating the quick and easy direct replacement process.
4. 4단계: 전원을 복구하십시오. Once all LED tubes are securely installed, restore power to the fixture from the circuit breaker or fuse box.
5. Step 5: Verify Operation. Turn on the light switch to confirm the LED tubes illuminate instantly and without flickering.


Image: An illuminated Feit Electric LED tube light, showcasing its 4000K Cool White light output in a typical setting.



Image: A garage setting with a Feit Electric LED tube light installed, demonstrating its instant full brightness and lack of flickering or strobing.

참고: l인 ​​경우amp does not light when installed, remove it and contact Feit Electric customer support.

작동 지침

Once installed, the Feit Electric LED T8 Linear Tube Light operates like a standard fluorescent tube. Simply use the existing light switch to turn the light on or off. The LED tube will provide instant, full brightness without any warm-up time or flickering.

• 온/오프 작동: Use the wall switch connected to the fixture to control the light.
• 비조광: This product is not compatible with dimmers. Attempting to use it with a dimmer may damage the tube or the ballast.
• 최적의 성능: Designed for general illumination in offices, garages, workspaces, warehouses, and similar environments.

유지

The Feit Electric LED T8 Linear Tube Light requires minimal maintenance due to its long lifespan and durable construction.

• 청소: Ensure the power is off before cleaning. Wipe the tube with a soft, dry, or slightly damp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
• 대사: With a 50,000-hour lifespan, frequent replacement is not necessary. When replacement is required, follow the installation steps in reverse.
• 처분: These tubes are mercury-free and can be disposed of safely according to local regulations.

문제 해결

If you encounter issues with your Feit Electric LED T8 Linear Tube Light, refer to the following common problems and solutions:

명세서

보증

Feit Electric provides a 1년 보증 on this product from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Feit Electric customer support.

고객 지원

For 24/7 customer support, technical assistance, or warranty inquiries, please visit the Feit Electric help center or contact us directly:

• 온라인 도움말 센터: help.feit.com
• 핸드폰: Refer to the Feit Electric web현재 연락처 정보는 사이트에서 확인하세요.

Image: A visual representation of Feit Electric's 24/7 customer support, directing users to their online help center at feit.com/help via text and a QR code.