1. 서론
Thank you for choosing the SEBSON Recessed Ceiling Motion Detector. This device is designed for indoor use to automatically control lighting based on motion and ambient light levels. Please read this manual carefully before installation and operation to ensure proper function and safety.
2. 안전 지침
- 설치는 현지 배선 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
- Disconnect power at the main circuit breaker before installation or maintenance.
- Do not exceed the maximum load capacity of the detector (2000W for incandescent, 1000W for LED).
- 이 제품은 실내에서만 사용하도록 설계되었습니다. 습기나 극한 온도에 노출되지 않도록 하십시오.
- 장치 주변의 적절한 환기를 보장하십시오.
3. 제품 특징
- Indoor motion detector for recessed ceiling mounting.
- Wide detection range of 8 meters and 360 degrees.
- Adjustable operating duration from 10 seconds to 30 minutes.
- Adjustable ambient light sensitivity from 3 to 2000 lux.
- Compatible with LED lighting (max 1000W) and incandescent bulbs (max 2000W).
- 3-wire connection for reliable operation.
4. 패키지 내용
- 1x SEBSON Recessed Ceiling Motion Detector (Anthracite)
- 1x 사용 설명서
5. 설치
중요한: Ensure power is disconnected at the main circuit breaker before starting installation.
- Prepare a mounting hole in the ceiling with a diameter of 63-66 mm. Ensure there is sufficient depth (minimum 45 mm) for the detector.
- Connect the wiring according to the diagram below. The detector requires a 3-wire connection (Live, Neutral, Switched Live).
- Insert the detector into the prepared hole. The spring clips will secure it in place.
- 전원을 복구하고 기능이 제대로 작동하는지 테스트하십시오.
5.1. 제품 오버view 및 치수
6. 운영 및 조정
The motion detector features two adjustable dials on the back for 'TIME' (duration) and 'LUX' (light sensitivity).
6.1. TIME Adjustment
The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. Rotate the dial to set the desired duration:
- 10s: Minimum duration (10 seconds).
- 30 분: Maximum duration (30 minutes).
6.2. LUX Adjustment
The 'LUX' dial determines the ambient light level at which the detector will activate. This allows the light to only turn on when it's dark enough.
- 3: Activates only in very dark conditions (e.g., night).
- 2000: Activates in all light conditions (day and night).
To set the LUX level, turn the dial to the sun symbol (2000 lux) for testing during daylight. Once satisfied with the detection, adjust the dial towards the moon symbol (3 lux) to the desired ambient light level for automatic operation.
6.3. 감지 범위
The detector has a 360° detection angle and a maximum range of 8 meters. Optimal installation height is between 1.8m and 4m. Avoid installing near heat sources, direct sunlight, or areas with significant air movement (e.g., air conditioning vents) to prevent false triggers.
7. 유지관리
The SEBSON motion detector requires minimal maintenance. Ensure the sensor lens is kept clean and free from dust or obstructions. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. |
|
|
| 빛은 계속 켜져 있습니다. |
|
|
| 움직임이 없는데도 불이 켜집니다. |
|
|
9. 사양
| 상표 | 셉슨 |
| 모델 번호 | IR_ES_EA |
| 색상 | 무연탄 |
| 치수(길이 x 너비 x 높이) | 7.5 x 7.5 x 7.5cm |
| 무게 | 110그램 |
| 장착 유형 | 매립형(천장) |
| 장착 구멍 직경 | 63~66mm |
| 전원 | 교류 전원 |
| 최대 부하(백열전구) | 2000와트 |
| Max Load (LED/Energy Saving) | 1000와트 |
| 감지 범위 | 8 미터 |
| 감지 각도 | 360° |
| Operating Duration (TIME) | 10초 - 30분 |
| Ambient Light Sensitivity (LUX) | 3 - 2000 럭스 |
| 호환 장치 | Basic lighting controls |
| 추천 용도 | Residential security, commercial security, automation, energy management |
| 원산지 | 중국 |
10. 보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.