MiBoce Electric Table Disc Sander Instruction Manual

1. 서론

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your MiBoce Electric Table Disc Sander. Please read this manual thoroughly before operating the machine and keep it for future reference.

그림 1: MiBoce Electric Table Disc Sander. This image shows the compact design of the disc sander with its motor, sanding disc, and stable base.

2. 안전 지침

이 전동 공구를 사용할 때 화재, 감전, 신체 부상의 위험을 줄이려면 항상 기본적인 안전 예방 조치를 따르세요.

• 모든 지침 읽기: 기계의 조작법과 올바른 사용법을 익혀보세요.
• 눈 보호 장비 착용: 항상 보안경 또는 측면 실드가 있는 보안경을 착용하십시오.
• 호흡기 보호구를 착용하십시오: 특히 목재나 미세 먼지를 발생시키는 기타 재료를 사포질할 때는 방진 마스크를 착용하십시오.
• 안전한 작업물: 항상 clamp 또는 다른 방법으로 공작물을 고정하여 샌딩 작업 중 움직임을 방지하십시오.
• 작업 공간을 깨끗하게 유지하세요: 어수선한 곳은 사고를 불러일으킵니다. 적절한 조명을 확보하세요.
• 위험한 환경을 피하십시오: 전동공구를 사용하지 마십시오amp 젖은 장소 또는 비에 노출시키십시오.
• 항상 경계하세요: Do not operate the tool when you are tired or under the influence of drugs, alcohol, or medication.
• 조정 전에 플러그를 뽑으세요: Always unplug the sander from the power source before making any adjustments, changing accessories, or storing the tool.
• Use Correct Sandpaper: Ensure the sandpaper is correctly sized and securely attached to the disc.
• 적절한 균형을 유지하세요: 너무 뻗지 마세요. 항상 적절한 발판과 균형을 유지하세요.

3. 제품 오버view

Understand the main components of your MiBoce Electric Table Disc Sander for proper operation and maintenance.

그림 2: Key components of the disc sander. This diagram highlights the Copper core DC motor, Motor shield, Sandpaper suction cup, Stainless steel workbench, Switch, Desktop fixing hole, and Shock-absorbing foot pads.

Internal Motor Components

그림 3: 상세한 view of the motor's internal structure. This image illustrates the Fine grinding spindle, Bearings, Copper wire, Cooling fan, and Pure copper contacts, emphasizing the quality of internal construction.

4. 사양

그림 4: Machine dimensions. This image provides a visual representation of the sander's length (19cm), width (14cm), and height (12cm).

5. 설정

Follow these steps to set up your disc sander before initial use.

1. 풀다: Carefully remove all components from the packaging. Verify that all accessories listed in the "Product Accessories" section are present.
2. 놓기: Place the sander on a stable, level workbench. The shock-absorbing foot pads should provide stability.
3. 보안(선택 사항): If desired, use the desktop fixing holes to permanently mount the sander to your workbench for added stability during heavy use.
4. 사포를 부착하세요:
   • 기계의 플러그가 뽑혀 있는지 확인하십시오.
   • Peel the backing from a new 75mm sandpaper disc.
   • Carefully align and press the sandpaper onto the sandpaper suction cup (sanding disc) until it is firmly attached and centered.
5. 전원 연결: Connect the power adapter to the sander and then plug the adapter into a suitable 110V-240V power outlet.

제품 액세서리

그림 5: Included accessories. This image displays the 20 pieces of sandpaper, the speed control power supply, and the matching wrench.

제품 액세서리에는 다음이 포함됩니다.

• 1 x Electric Sanding Polishing Grinding Machine
• 20 x Sandpapers (75mm)
• 1 x Speed Control Power Supply (12-24V)
• 1 x Matching Wrench

6. 사용 설명서

Follow these guidelines for safe and effective operation of your disc sander.

1. 전원 켜기: Flip the power switch (refer to Figure 2) to the "ON" position.
2. 속도 조정: Use the speed control on the power adapter to select the desired output speed, ranging from 2000 to 6000 revolutions per minute (r/min). Start with a lower speed for delicate work and increase as needed for more aggressive material removal.
3. 샌딩 기술:
   • Hold the workpiece firmly against the stainless steel workbench.
   • Gently bring the workpiece into contact with the rotating sandpaper disc.
   • Apply even, light pressure. Avoid pressing too hard, as this can overheat the motor, damage the workpiece, or wear out the sandpaper prematurely.
   • Move the workpiece smoothly across the disc to ensure even sanding and prevent grooves.
4. 재료 호환성: This sander is suitable for polishing and grinding various materials including wood, plastic, ceramic tiles, glass, stone, and metal.

그림 6: Versatile applications. This image demonstrates the sander's capability for working with various materials such as metal, Bodhi beads, Buddha beads, beeswax, and wood.

Always observe the material being sanded and adjust speed and pressure accordingly. For best results, use appropriate grit sandpaper for your specific task.

7. 유지관리

Regular maintenance ensures the longevity and optimal performance of your disc sander.

• 사용 후 세척: Always unplug the machine before cleaning. Use a brush or compressed air to remove dust and debris from the motor housing, workbench, and around the sanding disc.
• 사포 교체: When the sandpaper becomes worn, clogged, or loses its abrasive quality, replace it with a new 75mm disc. Ensure the machine is unplugged before changing sandpaper.
• 전원 코드 검사: Periodically check the power cord and adapter for any signs of damage. If damaged, have it repaired by a qualified technician.
• 모터 환기: 과열을 방지하기 위해 모터의 통풍구에 장애물이 없는지 확인하세요.
• 저장: 샌더는 깨끗하고 건조한 곳에 보관하고 어린이의 손이 닿지 않도록 하십시오.

8. 문제 해결

일반적인 문제와 이에 대한 잠재적 해결책은 이 섹션을 참조하세요.

• 샌더가 작동하지 않습니다:
  • 전원 코드가 콘센트와 기기에 제대로 꽂혀 있는지 확인하십시오.
  • 전원 스위치가 "ON" 위치에 있는지 확인하세요.
  • Verify the power outlet is functional by testing with another appliance.
• 샌딩 성능이 좋지 않음:
  • The sandpaper may be worn out or clogged. Replace it with a new disc.
  • Ensure the correct grit sandpaper is being used for the material and task.
  • Increase the output speed using the speed adjustment on the power adapter.
• 과도한 진동 또는 소음:
  • Check if the sandpaper disc is properly centered and securely attached.
  • Ensure the sander is placed on a stable, level surface.
  • Inspect the machine for any loose components.
• 모터 과열:
  • 작업물에 가해지는 압력을 줄이십시오.
  • Ensure motor ventilation slots are clear.
  • Allow the machine to cool down if it has been running continuously for an extended period.

If you encounter issues not covered here or if problems persist, contact MiBoce customer support for assistance.

9. 보증 및 지원

MiBoce products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or contact MiBoce customer service through the retailer where the product was purchased.

Please have your product model number (B0DMSV53NL) and purchase date available when contacting support.