PRUVEEO D90-4CH

PRUVEEO D90-4CH 블랙박스 및 하드와이어 키트 사용 설명서

Model: D90-4CH

1. 서론

This manual provides comprehensive instructions for the installation, operation, and maintenance of your PRUVEEO D90-4CH Dash Cam and ACC Hardwire Kit. This bundle is designed to provide continuous surveillance for your vehicle, especially with its 24-hour parking monitor mode.

PRUVEEO D90-4CH Dash Cam and Hardwire Kit components

이미지 1.1: 이상view of the PRUVEEO D90-4CH Dash Cam and Hardwire Kit.

2. 주요 특징

  • 24시간 주차 모드: The included hardwire kit enables the dash cam's parking monitor to function continuously, even when the vehicle's engine is off. This provides uninterrupted power for extended surveillance.
  • 낮은 볼륨tage 보호: An intelligent system is integrated into the hardwire kit to prevent vehicle battery drain. It automatically cuts off power to the dash cam if the car battery voltage drops below 11.8V (for 12V systems) or 23.5V (for 24V systems), ensuring sufficient power remains to start your vehicle.
  • 폭넓은 호환성: The hardwire kit supports input voltages from 12V to 30V and provides a 5V/3A output, making it compatible with various vehicles and Mini USB interface devices.
  • 쿼드 카메라 시스템: The D90-4CH features multiple cameras (Front, Left, Right, Rear) for comprehensive coverage around your vehicle.
  • 슈퍼 나이트 비전: Equipped with advanced night vision capabilities, including an F1.8 aperture and infrared lights for the cabin camera, ensuring clear recordings in low-light conditions.
  • 비상 잠금 장치: Automatically locks current video footage upon detecting a sudden impact or collision, preventing it from being overwritten.
  • 루프 녹음: Continuously records by overwriting the oldest footage when the memory card is full, ensuring uninterrupted recording.
Diagram showing quad camera angles and features

Image 2.1: Illustration of the D90-4CH's quad camera system and key features.

Comparison of night vision quality: bright, WDR, dark

Image 2.2: Demonstration of Super Night Vision capabilities in various lighting conditions.

3. 상자 안에 무엇이 들어있나요?

상자를 풀 때 다음 구성품이 모두 포함되어 있는지 확인하세요.

  • PRUVEEO D90-4CH Dash Cam
  • Mini USB to Hardwire Kit
  • 설치용 지렛대
  • 8 x Fuse Tap Cables (various types)
  • 4 x Cable Hiding Clips
  • 128GB 마이크로 SD 카드(사전 설치 또는 별도 포함)
Contents of the hardwire kit including cables, fuses, and pry tool

Image 3.1: Components of the ACC Hardwire Kit.

4. 설정 및 설치

4.1 대시캠 장착

Mount the D90-4CH Dash Cam securely on your vehicle's dashboard or windshield, ensuring it does not obstruct your view. Use the provided adhesive mount or suction cup mount as appropriate. Position the front camera to capture the road ahead clearly, and adjust the cabin camera for optimal interior view.

4.2 Hardwire Kit Installation for 24-Hour Parking Mode

The hardwire kit connects your dash cam directly to your vehicle's fuse box, providing continuous power for parking mode and protecting against battery drain.

  1. 퓨즈 박스를 찾으십시오: Locate your vehicle's fuse box. Refer to your vehicle's owner's manual for its exact location (typically under the dashboard, in the engine bay, or in the trunk).
  2. 전선 연결: The hardwire kit has three wires:
    • 적색선(ACC): Connect to a fuse that is only powered when the ignition is on (e.g., radio, cigarette lighter). Use one of the provided fuse tap cables.
    • Yellow Wire (12V Normal Power): Connect to a fuse that has constant power, even when the ignition is off (e.g., hazard lights, interior lights). Use a fuse tap cable.
    • 검은색 전선(접지): Connect to a metal bolt or screw on the vehicle's chassis that provides a good ground connection.
  3. Insert Fuse Taps: Select the appropriate fuse tap cable for your vehicle's fuse type. Insert the original fuse into the lower slot of the fuse tap, and a new fuse (of the same rating as the original) into the upper slot for the dash cam circuit.
  4. 케이블 경로: Carefully route the hardwire kit cables along the vehicle's trim and headliner using the provided cable hiding clips and installation crowbar to ensure a neat and secure installation.
  5. 대시캠에 연결: Plug the Mini USB connector from the hardwire kit into the corresponding port on your D90-4CH Dash Cam.
  6. 테스트 연결: Start your vehicle to ensure the dash cam powers on. Turn off the vehicle and remove the key to verify that the parking mode activates (the dash cam should remain powered or enter a low-power parking mode).
Diagram showing wire connections for the hardwire kit

Image 4.1: Wiring diagram for the ACC Hardwire Kit connection to the vehicle's fuse box.

LED indicator light feature on the hardwire kit

Image 4.2: The LED indicator on the hardwire kit illuminates when correctly installed (ACC and Black wires).

5. 사용 설명서

5.1 기본 작업

Once powered, the D90-4CH Dash Cam will automatically begin recording. The display will show the live view from the cameras. You can switch between camera views (front, cabin, rear, split-screen) using the buttons on the device.

5.2 Parking Monitor Mode

With the hardwire kit correctly installed, the dash cam will automatically switch to parking monitor mode when the vehicle's ignition is turned off. In this mode, the dash cam will detect impacts or motion (if enabled) and record short video clips to capture events while parked.

5.3 Accessing Recordings

Recordings are saved to the Micro SD card. You can view recordings directly on the dash cam's screen, or remove the SD card and insert it into a computer for playback and backup. Emergency locked videos are stored in a separate folder to prevent overwriting.

쿼드 카메라 views: Front, Inside, LoR, Rear

이미지 5.1: Examples of video capture from the D90-4CH's multiple cameras.

6. 유지관리

  • 깨끗한 렌즈: Regularly clean the camera lenses with a soft, lint-free cloth to ensure clear video quality. Avoid abrasive materials.
  • SD 카드 관리 : Periodically format the Micro SD card (at least once a month) to maintain optimal performance and prevent data corruption. Back up important footag서식을 적용하기 전에 e를 입력하세요.
  • 펌웨어 업데이트: Check the PRUVEEO official web대시캠에 최신 기능과 버그 수정 사항이 적용되었는지 확인하려면 사용 가능한 펌웨어 업데이트가 있는지 사이트를 방문하세요.
  • 온도: 대시캠을 장시간 극한의 온도에 노출시키지 마세요.

7. 문제 해결

  • 대시캠 전원이 켜지지 않음:
    • Check all cable connections, especially the hardwire kit connections to the fuse box and ground.
    • Verify that the vehicle's fuses are intact and not blown.
    • 차량 배터리에 충분한 충전량이 있는지 확인하십시오.
  • 주차 모드가 작동하지 않음:
    • Confirm the yellow wire of the hardwire kit is connected to a constant power fuse.
    • 낮은 볼륨 확인tage protection setting; if the battery voltage is too low, the kit will cut power.
  • 낮은 비디오 품질:
    • 카메라 렌즈를 청소하세요.
    • 렌즈에서 보호 필름을 제거했는지 확인하세요.
    • Check dash cam settings for resolution and exposure.
  • SD Card Error/Recording Issues:
    • Format the Micro SD card within the dash cam's settings.
    • Ensure you are using a high-speed (Class 10 or U3) Micro SD card.
    • 카드 고장 여부를 확인하기 위해 다른 마이크로 SD 카드를 사용해 보세요.

8. 사양

특징사양
상표푸르베오
모델명D90-4CH
연결 기술USB
특징주차 모니터
비디오 캡처 해상도1080p (for each camera)
포함된 구성 요소하드 와이어 키트
장착 유형Dashboard Mount / Windshield Mount
Hardwire Kit Input12V-30V
하드와이어 키트 출력5V/3A (compatible with 1A/2A)
낮은 볼륨tage 보호11.8V (12V 시스템) / 23.5V (24V 시스템)

9. 보증 및 지원

For warranty information, technical support, or service inquiries, please contact PRUVEEO customer support directly. Refer to the product packaging or the official PRUVEEO web최신 연락처 정보 및 보증 정책은 해당 사이트를 참조하십시오.

You can also visit the official PRUVEEO Store on Amazon for more information: PRUVEEO Store

© 2024 PRUVEEO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.