소개
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Atlantic Nanto 831236 30L Electric Water Heater. Please read these instructions carefully before installation and use, and keep them for future reference. Proper installation and adherence to these guidelines will ensure optimal performance and longevity of your appliance.
안전 정보
화재, 감전, 부상 또는 기기 손상의 위험을 줄이려면 항상 다음 안전 수칙을 준수하십시오.
- 설치는 현지 규정 및 기준에 따라 자격을 갖춘 전문가가 수행해야 합니다.
- Ensure the electrical supply matches the specifications of the water heater (220-240V~, 50-60Hz).
- 온수기가 손상되었거나 오작동하는 경우 작동하지 마십시오.
- Never block ventilation openings.
- 유지 관리 또는 수리를 수행하기 전에 전원을 분리하십시오.
- 본 기기는 신체적, 감각적 또는 정신적 능력이 저하된 사람(어린이 포함)이나 경험 및 지식이 부족한 사람이 사용하도록 의도된 것이 아니며, 안전을 책임질 사람으로부터 기기 사용에 관한 감독이나 지시를 받은 경우에만 사용할 수 있습니다.
설정 및 설치
The Atlantic Nanto 831236 is designed for wall-mounted, above-sink installation. Ensure the mounting surface is strong enough to support the full weight of the water heater when filled with water (approximately 45 kg).
짐 풀기
Carefully remove the water heater from its packaging. Inspect for any signs of damage. Keep packaging materials away from children.
Image: Packaging of the Atlantic Nanto 30L electric water heater, displaying product details and branding.
Image: Packaging of the Atlantic Nanto 30L electric water heater, illustrating its dimensions for installation planning.
설치
- Select a suitable wall location above the sink, ensuring sufficient clearance for maintenance and operation.
- Mark the drilling points for the mounting brackets on the wall. Refer to the rear view of the unit for bracket positions.
- Drill holes and insert appropriate wall anchors. Secure the mounting brackets firmly to the wall.
- Carefully lift the water heater and hang it onto the secured wall brackets. Ensure it is level and stable.
이미지: 후면 view of the Atlantic Nanto 30L electric water heater, highlighting the mounting points and electrical connection area.
배관 연결
- Connect the cold water inlet (usually marked blue) to the main cold water supply.
- Connect the hot water outlet (usually marked red) to the hot water tap.
- Install a pressure relief valve on the cold water inlet, as required by local codes.
- 모든 연결 부분이 방수 처리되어 있는지 확인하세요.
전기 연결
- Ensure the power supply is disconnected before making electrical connections.
- 온수기를 전용 접지 회로에 연결하십시오.
- The appliance operates at 220-240V~, 50-60Hz, with a power rating of 1500W.
- 모든 전기 연결이 안전하고 지역 전기 규정을 준수하는지 확인하십시오.
Image: Product label of the Atlantic Nanto 831236 water heater, detailing its electrical specifications and IP24 rating.
작동 지침
Once installed and filled with water, your Atlantic Nanto water heater is ready for operation.
탱크 채우기
- Before switching on the power, open a hot water tap in your sink to allow air to escape from the tank.
- Turn on the cold water supply to the water heater.
- Wait until water flows steadily from the hot water tap, indicating the tank is full. Close the hot water tap.
Powering On and Temperature Adjustment
- Connect the water heater to the electrical supply. The power indicator light (if present) will illuminate.
- Use the temperature control knob located on the front of the unit to set your desired water temperature. Turning the knob clockwise typically increases the temperature.
- The water heater will begin heating the water. Heating time will vary depending on the initial water temperature and the selected setting.
이미지: 앞면 view of the Atlantic Nanto 30L electric water heater, showing the temperature control knob for user adjustment.
에너지 절약 팁
- Set the temperature to the lowest comfortable level to save energy.
- Consider insulating hot water pipes to reduce heat loss.
- The appliance has an energy efficiency class C.
유지
Regular maintenance ensures the efficient and safe operation of your water heater.
연간 검사
- 자격을 갖춘 기술자가 매년 온수기 검사를 받는 것이 좋습니다.
- This inspection should include checking the heating element, anode rod (if applicable), and pressure relief valve.
탱크 비우기
If the water heater will be out of use for an extended period or if there is a risk of freezing, the tank should be drained.
- 온수기의 전원 공급 장치를 분리하십시오.
- 냉수 입구 밸브를 닫습니다.
- Open a hot water tap to release pressure.
- Connect a hose to the drain valve (if present) or disconnect the cold water inlet pipe to drain the tank.
청소
부드러운 천으로 온수기 외부를 닦으세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
문제 해결
고객 지원팀에 문의하기 전에 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 뜨거운 물이 없습니다 | 전원 공급이 없습니다 온도 조절기가 너무 낮게 설정됨 가열소자 고장 | 회로 차단기/퓨즈를 확인하세요 온도 조절기 설정 조정 자격을 갖춘 기술자에게 문의 |
| 온수가 부족함 | 온도 조절기가 너무 낮게 설정됨 과도한 온수 사용 침전물 축적 | 온도 조절기 설정을 높이세요 Allow time for reheating Contact a qualified technician for descaling |
| 물이 새다 | 느슨한 배관 연결 Pressure relief valve discharge Tank corrosion | 연결을 조여주세요 This is normal if pressure is too high; check system pressure 자격을 갖춘 기술자에게 문의 |
| 특이한 소음 | 침전물 축적 느슨한 구성 요소 | Contact a qualified technician for descaling 자격을 갖춘 기술자에게 문의 |
명세서
Detailed technical specifications for the Atlantic Nanto 831236 Electric Water Heater.
Image: Internal diagram of an electric water heater, illustrating the heating element, insulation, and water tank components.
- 상표: 거인 아틀라스
- 모델 번호: 831236
- 용량: 30리터
- 색상: 하얀색
- 에너지 효율 등급: C
- 장착 유형: Wall mount (Above sink)
- 힘: 1500와트
- 권tage: 220 ~ 240V ~
- 빈도: 50-60Hz
- IP 등급: IP24
- 치수(대략): 44cm(폭) x 39cm(깊이) x 46cm(높이)
보증 및 지원
For warranty information, please refer to the warranty card included with your product or contact Atlantic customer service. Keep your proof of purchase for warranty claims.
For technical support or service, please contact your local Atlantic dealer or authorized service center. You can find contact information on the official Atlantic web사이트나 소매업체를 통해 구매하세요.
