1. 제품 오버view
The DATOUBOSS 12V 100Ah LiFePO4 Lithium Battery is a high-performance, deep-cycle battery designed for a wide range of applications including RVs, solar energy systems, trolling motors, and camping setups. Featuring a built-in 100A Battery Management System (BMS), this battery offers advanced protection against common issues such as over-voltage, over-discharge, over-current, and high temperatures, ensuring safe and reliable operation. Its lightweight and compact design make it an ideal replacement for traditional lead-acid batteries, providing superior energy density and a longer lifespan.
Figure 1: DATOUBOSS 12V 100Ah LiFePO4 Battery with key dimensions and specifications.
2. 상자 안에 무엇이 들어있나요?
Upon unboxing your DATOUBOSS 12V 100Ah LiFePO4 Lithium Battery, please ensure all components are present and undamaged.
- 1x DATOUBOSS 12V 100Ah LiFePO4 Battery
- Terminal Bolts (M8) and Washers
- Terminal Caps (Red and Black)
- 사용자 설명서
Video 1: Unboxing and initial inspection of the DATOUBOSS 12V 100Ah LiFePO4 Battery.
3. 사양
| 특성 | 값 |
|---|---|
| 정격 볼륨tage | 12.8V |
| 정격 용량 | 100아아 |
| 에너지 | 1280Wh |
| 내장형 BMS | 100A |
| 사이클 수명 | 15000+ (Deep Cycle) |
| 무게 | 10.92kg(24.07파운드) |
| 치수(길이 x 너비 x 높이) | 25.8cm x 16.7cm x 21.5cm(10.2인치 x 6.6인치 x 8.5인치) |
| 터미널 크기 | M8 |
| 최대 충전 전류 | 50A |
| 최대 방전 전류 | 120A |
| 작동 온도(충전) | 0°C ~ 45°C(32°F ~ 113°F) |
| 작동 온도(방전) | -20°C ~ 60°C (-4°F ~ 140°F) |
| 방수 등급 | IP65 |
4. 주요 특징
- Built-in BMS Protection: Equipped with a 100A BMS, the battery is protected against high temperature, over-voltage, overload, overcharge, over-discharge, overcurrent, and short circuit, ensuring safe operation.
- Easy Battery Pack Expansion: This battery supports series and parallel connections, allowing expansion up to 4P4S for a 48V (51.2V) 400Ah Li-Ion battery pack, delivering up to 20.48kWh energy.
- Higher Performance & Safety: Constructed with automotive-grade, UL-certified LiFePO4 cells and an IP65 waterproof rating, it offers stable performance, high energy density, and superior reliability.
- 1/3 Lighter & 1/2 Smaller Size: Weighing only 10.92kg, it is significantly lighter and more compact than comparable lead-acid batteries, simplifying installation and portability.
- 다양한 용도: Suitable for various uses including backup power, home energy storage, lighting, trolling motors, fish finders, lawnmowers, golf carts, boats, solar power systems, UPS backup, RVs, and caravans.
Figure 2: Visual representation of the built-in BMS protection features.
5. 설정 및 설치
5.1 단자 연결
Before connecting, ensure the battery is placed on a stable, non-conductive surface. Remove the protective caps from the positive (red) and negative (black) terminals. Securely attach your battery cables using the provided M8 terminal bolts and washers. Ensure connections are tight to prevent arcing and overheating.
Video 2: Demonstrates the unboxing and terminal connection process.
5.2 직렬 및 병렬 연결
The DATOUBOSS LiFePO4 battery can be connected in series (for higher voltage) or parallel (for higher capacity). For optimal performance and to reduce voltage differences between batteries, fully charge each battery separately before connecting them. After individual charging, connect them one by one in parallel and allow them to sit for 12-24 hours to balance. Then, you can connect your batteries in series or parallel as needed, up to 4P4S configuration.
그림 3: 예ample configurations for series and parallel battery connections.
6. 충전
Use a dedicated LiFePO4 compatible charger. The recommended charging voltage is 14.4V ± 0.2V, and the maximum charge current is 50A. Avoid using chargers designed for lead-acid batteries unless they have a specific LiFePO4 mode, as this can damage the battery.
Video 3: Demonstrates battery charging and voltag전자 테스트.
7. 운영 지침
The DATOUBOSS LiFePO4 battery is designed for deep cycle applications, providing consistent power output. The built-in BMS actively monitors and protects the battery during use. Ensure your load does not exceed the maximum continuous discharge current of 100A or the peak discharge current of 120A.
- 작동 온도: Discharge between -20°C to 60°C (-4°F to 140°F).
- 권tag전자 안정성: The battery maintains voltage above 12.5V even at 90% discharged state, providing stable power.
비디오 4: Example of battery discharge operation powering various devices.
8. 유지관리
LiFePO4 batteries are largely maintenance-free. However, following these guidelines will ensure optimal performance and longevity:
- 정기 검사: 배터리 단자에 부식이나 연결 불량이 있는지 주기적으로 점검하고 필요에 따라 청소하십시오.
- 저장: If storing the battery for extended periods, recharge it every 6 months to maintain cell health.
- 셀 밸런싱: The BMS includes a balancing function. To ensure optimal cell balance, fully charge the battery to 100% periodically.
9. 문제 해결
9.1 BMS Cut-off for Protection
If the BMS cuts off the battery for protection (e.g., due to over-discharge, over-current, or high temperature), disconnect the load from the battery and let the battery rest for 30 minutes. The battery will automatically recover itself to normal voltage이며, 완전히 충전한 후 사용할 수 있습니다.
9.2 Battery Unable to Hold a Charge (Low Voltage)
배터리의 볼륨이tage is too low to hold a charge (e.g., 0V), you can activate it in two ways:
- Use a charger with a 0V charging function. This can charge the battery starting from 0V, allowing it to be used normally after a full charge.
- Connect an 18V-36V solar panel to charge the battery for 3-10 sunny days.
10. 안전 정보
부상이나 손해를 방지하기 위해 모든 안전 지침을 읽고 준수해 주십시오.
- 배터리를 물에 담그거나 젖게 하지 마십시오.
- 화기나 히터 등 열원 근처에서 배터리를 사용하거나 보관하지 마세요.
- Use only chargers recommended by the manufacturer.
- 양극(+)과 음극(-) 단자를 바꾸어 연결하지 마십시오.
- 양극(+), 음극(-) 단자에 전선이나 기타 금속 물체를 연결하여 배터리를 단락시키지 마십시오.
- 배터리를 분해하거나 개조하지 마십시오.
- 배터리에서 냄새가 나거나, 열이 발생하거나, 변색 또는 변형되거나, 어떤 형태로든 비정상적인 것처럼 보이는 경우에는 배터리를 사용하지 마십시오.
11. 보증 정책
DATOUBOSS provides a 2-year warranty for all batteries. This warranty covers manufacturing defects and ensures the battery performs according to the manual. If you encounter any problems, please contact customer support with your purchase details.
12. 고객 지원
For technical assistance, troubleshooting, or warranty claims, please contact DATOUBOSS customer service. Refer to your purchase documentation for specific contact information or visit the official DATOUBOSS web대지.