CUKTECH 10 100W USB C 벽면 충전기(모델 AD1003US) 사용 설명서

1. 서론

This manual provides essential information for the safe and efficient use of your CUKTECH 10 100W USB C Wall Charger. Please read these instructions thoroughly before operating the device and retain them for future reference.

2. 제품 오버view

The CUKTECH 10 is a versatile 100W USB C wall charger designed for fast and efficient charging of multiple devices.

• 최대 출력 100W: The charger provides a maximum power output of 100W, enabling rapid charging for compatible devices such as laptops and smartphones.
• 3-Port Simultaneous Charging: Equipped with dual USB-C ports and one USB-A port, this charger supports simultaneous charging of up to three devices.
• 광범위한 장치 호환성: Compatibility extends to a wide range of devices, including MacBook Pros/Airs, Pixelbooks, ThinkPads, iPhones, Galaxies, iPads, Pixels, Steam Deck, and Switch, through support for PD, QC, and PPS charging protocols.
• Compact GaN Technology: Utilizing advanced GaN technology, the charger offers efficient power delivery in a compact design with foldable prongs, minimizing heat generation for safe and stable charging.
• Included PD3.1 Cable: A 4.92ft PD3.1-240W cable is included, capable of delivering up to 100W for high-power devices like MacBooks, ensuring reliable and portable charging.

3. 패키지 내용

• CUKTECH 10 100W USB C Wall Charger
• 4.92ft PD3.1-240W USB-C to USB-C Cable

4. 사양

5. 설정

1. 갈래를 펼치세요: Gently pull out the foldable AC prongs from the charger body.
2. 전원 콘센트에 연결: Plug the charger firmly into a standard wall power outlet.
3. 충전 케이블을 준비하세요: Use the included USB-C to USB-C cable or another compatible charging cable for your device.

6. 사용 설명서

1. 장치 연결: Plug one end of your charging cable into the appropriate port (USB-C or USB-A) on the CUKTECH 10 charger.
2. 충전기에 연결: 충전 케이블의 다른 쪽 끝을 장치에 연결하십시오.
3. 충전 시작: The device should automatically begin charging. The charger intelligently detects the connected device and delivers optimal power based on its requirements and supported protocols (PD, QC, PPS).

7. 여러 기기 동시 충전

The CUKTECH 10 charger is designed to distribute power efficiently when multiple devices are connected. The total 100W output will be dynamically allocated across the active ports to provide the fastest possible charge for each device.

For optimal performance, ensure that your cables are rated for the power levels required by your devices. The charger's GaN technology helps manage heat effectively even under multi-device load.

8. 안전 정보

• Do not expose the charger to liquids, extreme temperatures, or humidity.
• 충전기를 떨어뜨리거나 강한 충격을 주지 마십시오.
• 충전기를 분해, 수리 또는 개조하지 마십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 호환되는 장치 및 케이블에만 사용하세요.
• 사용하지 않을 때는 충전기를 전원 콘센트에서 뽑아 두세요.

9. 유지관리

To ensure the longevity and optimal performance of your CUKTECH 10 charger:

• 충전기는 마른 부드러운 천으로 닦으십시오. 액체 세척제는 사용하지 마십시오.
• 사용하지 않을 때에는 충전기를 서늘하고 건조한 곳에 보관하십시오.
• Regularly inspect the charger and cables for any signs of damage. Discontinue use if damage is found.

10. 문제 해결

• 장치가 충전되지 않음:
  • 충전기가 전원 콘센트에 단단히 꽂혀 있는지 확인하세요.
  • 충전 케이블이 충전기와 기기에 모두 제대로 연결되어 있는지 확인하세요.
  • Try using a different cable or port to rule out cable/port issues.
  • Confirm your device is compatible with the charger's output.
• 느린 충전:
  • Ensure you are using a high-quality cable that supports fast charging protocols (e.g., PD3.1).
  • If multiple devices are connected, the power output per port may be reduced. Try charging fewer devices simultaneously.
  • Check if your device supports the fast charging protocols offered by the charger.
• 충전기가 뜨거워요:
  • It is normal for the charger to become warm during operation, especially under heavy load.
  • If the charger becomes excessively hot, disconnect it immediately and allow it to cool down. Ensure adequate ventilation.

11. 보증 및 지원

• 보증: This product comes with a 24-month warranty against manufacturing defects.
• 고객 지원: 연중무휴 24시간 고객 지원 서비스를 통해 도움을 받으실 수 있습니다.
• 애프터 서비스 지원: 문의사항이나 지원이 필요하시면 다음 연락처로 문의해 주세요. service@cuktech.com.