1. 서론
This manual provides detailed instructions for the safe and effective operation of the WOOXGEHM T6125 Digital Insulation Resistance Tester. The T6125 is a robust, shockproof, and dustproof instrument designed for measuring insulation resistance, absorption ratio (DAR), polarization index (PI), AC voltage, and low resistance. It features a wide measurement range, multiple output voltage levels, a large LCD with backlight, and strong anti-interference capabilities, making it suitable for various electrical equipment testing applications.
Figure 1: WOOXGEHM T6125 Digital Insulation Resistance Tester.
2. 안전 정보
To ensure safe operation and prevent damage to the instrument or injury to personnel, please read and understand all safety instructions before use.
- 항상 지역 및 국가 안전 규정을 준수하십시오.
- Do not operate the tester if it appears damaged or is not functioning properly.
- Ensure the circuit under test is de-energized and discharged before connecting test leads for resistance measurements.
- 제공된 테스트 리드 및 액세서리만 사용하십시오.
- 측정 중에는, 특히 고전압일 때 테스트 리드나 테스트 대상 회로를 만지지 마십시오.tages가 존재합니다.
- Do not use the instrument in wet environments or explosive atmospheres.
- 배터리 부족 표시등이 켜지면 즉시 배터리를 교체하십시오.
3. 패키지 내용
아래 나열된 모든 품목이 패키지에 들어 있는지 확인하세요.
- 1 x WOOXGEHM T6125 Digital Insulation Resistance Tester
- 1 x 테스트 리드 한 쌍
- 1 x External Power Plug (5.5mm)
- 악어 클립 2개
- 1 x 천 가방
- 1 x 사용자 매뉴얼(영어)
4. 제품 오버view
The T6125 insulation tester is designed for comprehensive electrical insulation testing. Key features include:
- 절연 저항 측정: Measures insulation opposition, absorption ratio, and polarization index.
- AC 볼륨tage 측정: Capable of measuring AC voltage.
- Low Resistance Measurement: For continuity checks.
- Multiple Test Voltag에스: Offers 100V, 250V, 500V, 1000V, and 2500V test voltag옵션
- Automatic Discharge Function: Ensures safety after high voltag전자 테스트.
- 데이터 보유 : 측정값을 고정하여 쉽게 기록할 수 있도록 합니다.
- Over-range Alarm: Alerts the user when measurements exceed the selected range.
- 자동 종료: 배터리 수명 절약을 위해 30분 동안 사용하지 않으면 자동으로 전원이 꺼집니다.
- Large Backlit LCD: 다양한 조명 조건에서도 선명한 판독값을 제공합니다.
- 내구성 있는 디자인: Shockproof, dustproof, and dampness-proof construction.
Figure 2: Front panel layout and key components of the T6125.
- 높은 Voltage Output Black Negative Jack: Connects the negative test lead for high voltag전자 테스트.
- 높은 Voltage Output Red Positive Jack: Connects the positive test lead for high voltag전자 테스트.
- Resistor Red Positive Jack: Connects the positive test lead for resistance measurements.
- Resistive Black Negative Jack: Connects the negative test lead for resistance measurements.
- 12V Power Input Jack: 외부 전원 공급용.
- LCD 디스플레이: Shows measurement readings and status.
- 테스트 버튼: 측정을 시작합니다.
- 데이터 홀드 버튼: Freezes the current display.
- 백라이트 버튼: LCD 백라이트를 켜거나 끕니다.
- DAR (Absorption Ratio) / PI (Polarization Index) Button: Selects DAR or PI measurement mode.
- 기어 회전 스위치: Selects measurement function and test voltage.
Figure 3: The T6125 features an automatic shutdown function after 30 minutes of inactivity to conserve battery life.
5. 설정
5.1 배터리 설치
The T6125 requires 8 x 1.5V AA batteries (not included).
- 장치 뒷면에서 배터리 칸을 찾으세요.
- 배터리 덮개를 엽니다.
- AA 배터리 8개를 올바른 극성(+/-)에 맞춰 넣으세요.
- 배터리 덮개를 단단히 닫으세요.
5.2 테스트 리드 연결
Connect the test leads to the appropriate jacks on the front panel based on the measurement type. For insulation resistance tests, use the High Voltage Output jacks. For low resistance, use the Resistor jacks.
6. 사용 설명서
6.1 전원 켜기/끄기
Rotate the Gear Rotary Switch from the "OFF" position to any measurement function to power on the device. Rotate back to "OFF" to power off. The device will automatically shut down after 30 minutes of inactivity.
6.2 절연 저항 측정
This function measures the insulation resistance of electrical equipment.
- 테스트 대상 회로의 전원이 차단되고 안전하게 방전되었는지 확인하십시오.
- Connect the test leads to the High Voltage Output jacks (red to positive, black to negative).
- Connect the other ends of the test leads to the insulation points of the equipment to be tested.
- Rotate the Gear Rotary Switch to the desired insulation test voltag예: 100V, 250V, 500V, 1000V, 2500V.
- 를 누르고 계세요 시험 button. The measurement will begin, and the resistance value will be displayed on the LCD.
- 릴리스하다 시험 button to stop the measurement. The instrument will automatically discharge the circuit.
- 측정값을 고정하려면 버튼을 누르세요. 잡고 있다 button during or after a measurement. Press again to release.
Figure 4: The T6125 offers a wide insulation test measurement range up to 2500V and 200.0GΩ.
6.3 흡수율(DAR) 및 편광 지수(PI) 측정
DAR and PI are used to assess the quality of insulation over time.
- Follow steps 1-3 for Insulation Resistance Measurement.
- Rotate the Gear Rotary Switch to the desired insulation test voltage.
- 를 누르세요 DAR/PI button to select the desired mode. The display will indicate "DAR" or "PI".
- 를 누르고 계세요 시험 button. The instrument will automatically perform the timed measurements and display the DAR or PI value.
- 릴리스하다 시험 단추.
6.4 AC 볼륨tage 측정
AC 볼륨을 측정하려면tage:
- Rotate the Gear Rotary Switch to the "ACV" position.
- Connect the test leads to the circuit where AC voltage는 측정되어야 합니다.
- AC 볼륨tage가 LCD에 표시됩니다.
6.5 저저항 측정
For continuity or low resistance checks:
- Rotate the Gear Rotary Switch to the "Ω" (low resistance) position.
- Connect the test leads to the Resistor jacks.
- Connect the other ends of the test leads to the component or circuit to be measured.
- 저항값이 LCD 화면에 표시됩니다.
7. 유지관리
7.1 청소
광고로 악기 닦기amp cloth and mild detergent. Do not use abrasive cleaners or solvents. Ensure the instrument is completely dry before storage or next use.
7.2 보관
When not in use for extended periods, remove the batteries to prevent leakage. Store the instrument in the provided cloth bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- 보관 온도: -20℃ ~ 60℃
- Working Conditions: 0℃ to 40℃
- 상대 습도: 40% ~ 75%
8. 문제 해결
If you encounter issues with your WOOXGEHM T6125, refer to the following common problems and solutions:
- 전원 없음:
- 배터리가 올바르게 설치되었고 충전량이 충분한지 확인하세요. 필요하면 교체하세요.
- Ensure the Gear Rotary Switch is not in the "OFF" position.
- 부정확한 판독:
- 테스트 리드가 단단히 연결되어 있고 손상되지 않았는지 확인하십시오.
- Ensure the correct measurement function and test voltage가 선택되었습니다.
- Clean the test points on the equipment being measured.
- 외부 간섭원을 확인하십시오.
- "OL" or Over-range Display:
- The measured value exceeds the selected range. Try a higher test voltage or a different range if applicable.
- 회로에 제대로 연결되었는지 확인하십시오.
문제가 지속되면 고객 지원에 문의하십시오.
9. 사양
| 모델 | T6125 |
| 재료 | ABS |
| 전원 공급 장치 | 8 x 1.5V AA 배터리(포함되지 않음) |
| 품목 크기 | 179 x 133 x 70mm(7.04 x 5.23 x 2.75인치) |
| 품목 무게 | 570g(1.25파운드) |
| 보관 온도 | -20℃ ~ 60℃ |
| 작업 조건 | 0℃ ~ 40℃ |
| 고도 | 2000m |
| 상대 습도 | 40%에서 75%까지 |
Insulation Test Accuracy (T-6125)
| 출력 볼륨tage | 범위 | 해결 | 최대 시험 전류 | 정확성 |
|---|---|---|---|---|
| 250V (± 10 %) | 0~20MΩ | 0.01MΩ | 2mA | ±(3%+5) |
| 20~200MΩ | 0.1MΩ | ±(3%+5) | ||
| 0.2G~2GΩ | 0.001GΩ | ±(10%+5) | ||
| 500V (± 10 %) | 0~20MΩ | 0.01MΩ | 2mA | ±(3%+5) |
| 20~200MΩ | 0.1MΩ | ±(3%+5) | ||
| 0.2G~2GΩ | 0.001GΩ | ±(10%+5) | ||
| 1000V (± 10 %) | 0~20MΩ | 0.01MΩ | 2mA | ±(3%+5) |
| 20~200MΩ | 0.1MΩ | ±(3%+5) | ||
| 0.2G~2GΩ | 0.001GΩ | ±(10%+5) | ||
| 2500V (± 10 %) | 0~20MΩ | 0.01MΩ | 2mA | ±(3%+5) |
| 20~200MΩ | 0.1MΩ | ±(5%+5) | ||
| 0.2G~2GΩ | 0.001GΩ | ±(10%+5) | ||
| 2G~20GΩ | 0.01GΩ | ±(10%+5) | ||
| AC 볼륨tage 정확도 | Ranging: 600V | 해상도: 1V | 없음 | ±(1.5%+5) |
| 저항 정확도 | Ranging: 60Ω | 해상도: 0.01Ω | 없음 | ±(1.2%+5) |
Figure 5: Detailed insulation test accuracy specifications for the T6125 model.
Figure 6: Physical dimensions of the WOOXGEHM T6125.
10. 보증 및 지원
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official WOOXGEHM web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.