Hbada E2 인체 공학적 사무실 의자

소개

This manual provides detailed instructions for the assembly, operation, and maintenance of your Hbada E2 Ergonomic Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

안전 정보

• Always follow the instructions provided with the chair for proper assembly and use.
• Be cautious when adjusting the chair's parts and when using the reclining function to avoid injury.
• 의자의 최대 중량을 초과하지 마십시오.
• Ensure all screws and connections are tightened securely before use. Periodically check and re-tighten as needed.
• 조립 중에는 어린이와 애완동물이 의자에 접근하지 못하도록 하세요.

패키지 내용

조립을 시작하기 전에 모든 구성품이 들어 있고 손상되지 않았는지 확인하십시오. 포장에는 다음이 포함되어야 합니다.

• Chair Base with Wheels
• 공압 실린더
• 좌석 쿠션
• 등받이
• 머리받침
• 팔걸이(2)
• Footrest (if included with your model)
• 조립 하드웨어(나사, 와셔, 육각 렌치)
• 사용 설명서

Image: All chair components and hardware neatly organized for assembly.

설정 및 조립

Assembly typically takes approximately 30 minutes. Only the provided Allen wrench is required.

1. 베이스 조립: Attach the wheels to each leg of the chair base.
2. Insert Pneumatic Cylinder: Place the air pneumatic cylinder into the center hole of the assembled base.
3. 발받침대 부착: Secure the footrest mechanism to the underside of the seat cushion.
4. 팔걸이 설치: Screw both armrests into their designated positions on the underside of the seat cushion.
5. 등받이 연결: Attach the backrest support to the back of the seat cushion using the provided screws.
6. Combine Seat and Base: Carefully place the assembled seat and backrest onto the pneumatic cylinder, ensuring it is firmly seated.
7. 헤드레스트를 부착하세요: Slide the headrest onto the top of the backrest until it clicks into place or is securely fastened.

Image: The Hbada E2 Ergonomic Office Chair fully assembled and ready for use.

작동 지침 및 조정

The Hbada E2 chair offers multiple adjustment options for personalized comfort:

• 의자 높이 조정: Use the lever located under the seat to raise or lower the chair to your desired height. Pull the lever up while seated to lower, or pull up while standing to raise.
• 6-Way Adjustable Lumbar Support: The lumbar support can be adjusted vertically (up to 2.36 inches), forward and backward (up to 1.97 inches), and floats 10 degrees left and right. This provides comprehensive support for your lower back.


이미지: 상세 view of the 6-way adjustable lumbar support mechanism.

• 3D 조절식 팔걸이: Adjust the armrests in three dimensions: height (up to 2.95 inches), forward and backward (up to 1.97 inches), and rotation (40 degrees left and right). This allows for optimal elbow and arm support.


Image: Illustration of the multi-directional adjustments for the armrests.

• 3D 조절식 머리받침: The headrest can be adjusted vertically (up to 3.93 inches), forward and backward (up to 1.57 inches), and rotated 60 degrees to support various heights and body types, relieving neck pressure.


Image: Visual guide for adjusting the headrest for optimal neck support.

• Reclining Function with 3 Lockable Angles: The chair reclines up to 135 degrees. Use the lever to adjust and lock the tilt at 90 degrees (comfortable office), 115 degrees (leisure and entertainment), or 138 degrees (short nap).


Image: Different reclining positions of the chair for various activities.

• 발판: If your model includes a footrest, it can be pulled out from under the seat and flipped over to provide leg support for relaxation.

주요 특징

• 혁신적인 인체공학적 디자인: The Hbada E2 incorporates advanced technology for comfortable posture, featuring an adjustable headrest, 6-way adjustable lumbar support, 3D armrests, breathable mesh fabric, reclining function, and a gravity-sensing chassis.
• 통기성 메쉬 원단: The chair features a completely breathable and durable mesh design for improved air permeability and comfort, especially during long periods of use.


Image: Detail of the breathable mesh material used in the chair's construction.

• Gravity-Sensing Functional Chassis: Allows for smooth reclining at different user weights.
• Aluminum Alloy Wired Control Adjustment: Provides one-button control for adjustments without needing to bend down.


Image: Close-up of the wired control lever for convenient adjustments.

• 내구성 있는 구성 요소: Features an SGS certified gas lift, PU-wrapped silent casters, and a high-load-bearing metal five-claw base for stability and longevity.


Image: Key durable components of the chair, including the gas lift, casters, and base.

• BIFMA Standard Tested: Tested for a 10-year lifespan, including 120,000 backrest push tests, 102kg backrest pull tests, 60,000 armrest adjustment tests, 120,000 times 78kg load tests, 120,000 gas lift height adjustment tests, and 100,000 caster rolling tests.


Image: Summary of durability tests passed by the chair.

유지

• 청소: Wipe down mesh and plastic surfaces with a damp 천과 순한 비누. 가혹한 화학 물질을 피하십시오.
• 점검: 모든 볼트와 나사가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
• 캐스터 관리: 바퀴가 원활하게 굴러가도록 머리카락이나 이물질이 끼지 않도록 관리하세요.
• 가스 리프트: 가스 리프트를 분해하려고 시도하지 마십시오. 오작동 시 고객 지원 센터에 문의하십시오.

문제 해결

• 의자 삐걱거리는 소리: Check and tighten all assembly screws. A small amount of silicone spray on moving parts may help.
• 의자 높이 조절이 안 됩니다. Ensure the pneumatic cylinder is correctly installed and the lever mechanism is functioning. If issues persist, the gas lift may need replacement.
• 캐스터가 원활하게 굴러가지 않음: 바퀴에 묻은 이물질(머리카락, 먼지)을 깨끗이 닦아내세요.
• Backrest/Armrests Feel Loose: Re-tighten the screws connecting these components to the seat.

명세서

보증 및 지원

Hbada is committed to providing high-quality products and customer satisfaction. For any issues or inquiries, please contact Hbada customer support.

• 부품 교체: Parts are replaced, not repaired.
• 반품 정책: 30일 반품 정책.
• Guaranteed Price: 15-day guaranteed price.
• 도착 시 파손됨: Repair and replacement guaranteed.

Additional protection plans may be available for purchase, offering extended coverage for 2 or 3 years.