소개
Thank you for choosing the Hbada E2 Ergonomic Office Chair. This manual provides detailed instructions for assembly, operation, and maintenance to ensure you get the most comfortable and healthy experience from your new chair. Please read this manual thoroughly before assembly and use.
안전 정보
Always follow the instructions provided with the chair for proper assembly and use. Be cautious when adjusting the chair's position, especially when reclining, to avoid injury. Do not exceed the maximum weight capacity of the chair.
패키지 내용
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list for a complete overview.
- Chair Base with Wheels
- 가스 리프트 실린더
- 좌석 조립
- 등받이 어셈블리
- 머리받침
- 팔걸이(좌우)
- Footrest (if applicable to your model)
- 조립 하드웨어(나사, 와셔, 육각 렌치)
- 사용 설명서
조립 설명서
Assembly typically takes about 30 minutes and requires only the provided Allen wrench. Follow these steps carefully:
- 의자 받침대를 조립하세요: Insert the wheels into each leg of the chair base. Ensure they are securely fitted.
Image: The chair base with its five legs and wheels, ready for assembly.
- Install the Gas Lift Cylinder: Insert the air pneumatic cylinder into the center hole of the assembled chair base.
- Attach the Footrest (if applicable): If your model includes a footrest, attach it to the underside of the seat assembly as per the specific instructions. The footrest is designed to slide out and fold for use.
- 팔걸이를 부착하세요: Screw both armrests to the underside of the seat assembly. Ensure they are firmly secured.
Image: Close-up of the chair's underside, indicating where armrests are screwed into place.
- 등받이 부착: Screw the backrest support to the back of the seat assembly.
Image: The backrest assembly being connected to the seat, showing the screw points.
- Connect Seat and Base: 조립된 좌석과 등받이를 가스 리프트 실린더에 조심스럽게 올려놓고 중앙에 위치하며 안정적으로 고정되었는지 확인하세요.
- 헤드레스트를 설치하세요: Slide the headrest onto the top of the backrest. It should click into place or be secured with a screw, depending on the design.
Image: The headrest component being installed onto the upper part of the chair's backrest.
작동 지침 및 조정
The Hbada E2 chair offers multiple adjustments for personalized comfort:
1. 좌석 높이 조절
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise the chair. Release the lever to lock the height.
2. 6방향 조절식 허리 지지대
The backrest features a dynamic lumbar support system. This support can be adjusted in 6 ways:
- Forward and Backward Adjustment: 3 levels of depth adjustment.
- 수직 조정: 허리 지지대를 위아래로 움직여 허리 곡선에 맞춰 정렬하세요.
- Left-Right Suspension: The floating structure adapts to your movements, providing continuous support.
Image: A detailed diagram showing the 6-way adjustable lumbar support, highlighting its 2.36" up & down, 1.97" front & back, and 10° left & right movement capabilities.
3. 3D 조절식 팔걸이
The armrests provide versatile support and can be adjusted in three dimensions:
- 높이 조정: Up to 7.5 cm (2.95 inches) vertically.
- Forward and Backward Adjustment: Up to 5 cm (1.97 inches) horizontally.
- 회전: 좌우로 40도씩 회전시키세요.
Image: A visual guide to the 3D ergonomic armrests, detailing 2.95" up & down, 1.97" front & back, and 40° left & right rotation.
4. 3D Adjustable Headrest and Reclining Function
The headrest and reclining function work together to provide full-body support:
- 머리받침 조정: Adjust vertically up to 10 cm (3.93 inches), forward and backward up to 3 cm (1.57 inches), and rotate 60 degrees to support your neck.
- 리클라이닝 기능: The chair reclines up to 135 degrees with three lockable tilt angles (90°, 115°, 138°). Use the wire-controlled adjustment for one-touch operation without bending down.
Image: A diagram showing the 3D adjustable headrest, indicating 3.93" up & down movement and 60° rotation.
Image: Three illustrations demonstrating the chair's 3-level locking recline feature: 90° for comfortable office work, 115° for leisure, and 138° for short naps.
이미지: 클로즈업 view of the aluminum alloy wire-controlled adjustment mechanism, designed for easy one-touch operation.
유지
Regular maintenance helps prolong the life and appearance of your Hbada E2 chair:
- 청소용 메쉬 원단: The breathable mesh fabric can be cleaned with a damp 천과 순한 비누. 가혹한 화학 물질을 피하십시오.
- 프레임 세척: Wipe the alloy steel frame and plastic components with a soft, damp 옷감.
- 휠 유지 관리: Periodically check the wheels for hair or debris and clean as needed to ensure smooth movement.
- 패스너 조이기: 몇 달에 한 번씩 모든 나사와 볼트가 단단히 조여져 있는지 확인하십시오. 안정성을 유지하기 위해 필요한 경우 다시 조이십시오.
이미지: 확대된 view of the Flexmono Dragon Weave Mesh seat cushion, emphasizing its breathable structure for improved air permeability.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 의자는 높이 조절이 되지 않습니다. | 가스 리프트 실린더 고장 또는 레버 미작동. | 높이 조절 레버가 완전히 고정되었는지 확인하세요. 문제가 지속되면 가스 리프트 실린더를 교체해야 할 수 있습니다. 고객 지원 센터에 문의하세요. |
| 의자가 흔들리거나 불안정하게 느껴집니다 | 느슨한 나사나 고르지 않은 바닥. | 모든 조립 나사를 확인하고 조여주세요. 의자가 평평하고 평평한 표면에 있는지 확인하세요. |
| 팔걸이가 헐거워요 | 장착 나사가 느슨합니다. | 팔걸이를 좌석에 고정하는 나사를 조이세요. |
| 등받이가 뒤로 젖혀지거나 고정되지 않습니다. | Recline mechanism is jammed or not engaged. | Ensure the recline lock lever is disengaged to recline. If it doesn't lock, check for obstructions or contact support. |
명세서
- 상표: 흐바다
- 모델: E2
- 색상: 검은색
- 제품 크기: 30.51인치 깊이 x 22.24인치 너비 x 18.11인치 높이
- 백 스타일: 망사
- 연령대 (설명): 성인
- 팔 스타일: Padded, 3D Adjustable
- 충전물 : 망사
- 재료: Alloy Steel (Frame), Mesh (Seat/Back)
- 리클라이닝 포지션 카운트: 3 (최대 135도)
- 기울이기: 예
- 폼 팩터: 사무실 의자
보증 및 지원
Hbada is committed to providing high-quality products and customer satisfaction. Your Hbada E2 Ergonomic Office Chair comes with comprehensive support:
- 부품 교체: Parts are replaced, not repaired, for covered issues.
- 30일 반품 정책: Enjoy a 30-day return period without specific reasons required.
- 도착 시 파손됨: Repair and replacement are guaranteed for items damaged during shipping.
- 고객 서비스: For any questions, issues, or warranty claims, please visit the official Hbada store or contact their customer support directly.
자세한 내용은 다음을 방문하세요. 아마존에서 Hbada 스토어를 만나보세요.